main
Ray
rt7737gge: laser-etched CAD + chip hero (factory 2.0.0 backfill)
72c3666
RT7737GGE
Richtek Tech · AC-DC Controllers and Regulators · SOT-23-6
RT7737GGE from Richtek Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BURST | input | Programmable burst switching green mode / burst mode level input. Sets the burst threshold via an external resistor (RBS in the application circuit). Pin number inferred from typical Richtek SOT-23-6 flyback controller ordering; verify against pin configuration diagram. |
| 2 | COMP | input | Loop compensation / feedback input, typically driven by an optocoupler collector for secondary-side feedback. Pin number inferred; verify. |
| 3 | GND | power_in | Signal and power ground reference for the controller. |
| 4 | CS | input | Current-sense input from the MOSFET source resistor (RCS_RC in the application circuit). Used for cycle-by-cycle current limit and over-load protection; also monitored for CS-pin open protection. |
| 5 | GATE | output | Gate driver output for the primary-side power MOSFET. Driver capability 200mA source / 300mA sink. |
| 6 | VDD | power_in | Controller bias supply, typically fed from an auxiliary winding through a rectifier and bulk capacitor. Protected by UVLO and VDD over-voltage protection (OVP). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Richtek Tech |
| Package | SOT-23-6 |
| Category | PMIC |
| Pins | 6 |
Ordering variants
Same part, different packaging or reel option.
RT7737GGE
CAD (KiCad official)
- Symbol:
RT7737GGE - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
rt7737gge-etched.step/rt7737gge-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rt7737gge.step/rt7737gge.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Richtek Tech datasheet (1 pp, sha256
4954224f6f16202f, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# RT7737GGE
**Richtek Tech** · AC-DC Controllers and Regulators · SOT-23-6
RT7737GGE from Richtek Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BURST | input | Programmable burst switching green mode / burst mode level input. Sets the burst threshold via an external resistor (RBS in the application circuit). Pin number inferred from typical Richtek SOT-23-6 flyback controller ordering; verify against pin configuration diagram. |
| 2 | COMP | input | Loop compensation / feedback input, typically driven by an optocoupler collector for secondary-side feedback. Pin number inferred; verify. |
| 3 | GND | power_in | Signal and power ground reference for the controller. |
| 4 | CS | input | Current-sense input from the MOSFET source resistor (RCS_RC in the application circuit). Used for cycle-by-cycle current limit and over-load protection; also monitored for CS-pin open protection. |
| 5 | GATE | output | Gate driver output for the primary-side power MOSFET. Driver capability 200mA source / 300mA sink. |
| 6 | VDD | power_in | Controller bias supply, typically fed from an auxiliary winding through a rectifier and bulk capacitor. Protected by UVLO and VDD over-voltage protection (OVP). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Richtek Tech |
| Package | SOT-23-6 |
| Category | PMIC |
| Pins | 6 |
## Ordering variants
Same part, different packaging or reel option.
- `RT7737GGE`
## CAD (KiCad official)
- Symbol: `RT7737GGE`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `rt7737gge-etched.step` / `rt7737gge-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `rt7737gge.step` / `rt7737gge.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Richtek Tech datasheet](docs/rt7737gge-datasheet.pdf) (1 pp, sha256 `4954224f6f16202f`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/rt7737gge-datasheet.pdf)