3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownRT7295CGJ6F
Richtek Tech · DC-DC Converters · TSOT-23-6
RT7295CGJ6F from Richtek Tech, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT | passive | Bootstrap supply for the high-side gate driver. Connect a 0.1uF ceramic capacitor between BOOT and SW. Absolute max: (VSW - 0.3V) to (VSW + 6V). |
| 2 | GND | power_in | Power ground return for the converter. |
| 3 | FB | input | Feedback voltage input. Sets output voltage via a resistive divider from VOUT. The converter regulates VFB to 0.6V (typ, 591-609mV). |
| 4 | EN | input | Enable control input. Drive to logic-high (VEN_H = 1.19-1.39V) to enable the IC or logic-low (VEN_L = 0.93-1.13V) to disable. Do not leave floating due to high input impedance. |
| 5 | VIN | power_in | Power input. Input voltage range is 4.3V to 18V (absolute max 20V to GND). Must be bypassed with a suitable large ceramic capacitor (typ 10uF) at this pin. |
| 6 | SW | power_out | Switch node. Connect to the external L-C output filter. Absolute max: -0.3V to (VIN + 0.3V), or -5V to 25V for <10ns transients. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Richtek Tech |
| Package | TSOT-23-6 |
| Category | PMIC |
| Pins | 6 |
Ordering variants
Same part, different packaging or reel option.
RT7295CGJ6F
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN to GND | -0.3 | 20 | V | 3 | |||
| SW to GND | -0.3 | V | 3 | ||||
| SW to GND (<10ns) | -5 | 25 | V | < 10ns | 3 | ||
| Other pins to GND | -0.3 | 6 | V | 3 | |||
| Power Dissipation TSOT-23-6 (FC) | PD | 1.429 | W | TA = 25°C | 3 | ||
| Package Thermal Resistance TSOT-23-6 (FC) junction-to-ambient | θJA | 70 | °C/W | Note 2: JEDEC 51-7 four-layer test board, TA = 25°C | 3 | ||
| Package Thermal Resistance TSOT-23-6 (FC) junction-to-case | θJC | 15 | °C/W | Measured at exposed pad | 3 | ||
| Lead Temperature (soldering, 10 sec) | 260 | °C | 10 sec soldering | 3 | |||
| Junction Temperature | 150 | °C | 3 | ||||
| Storage Temperature Range | -65 | 150 | °C | 3 | |||
| ESD Susceptibility HBM | 2 | kV | Human Body Model | 3 | |||
| Supply Input Voltage | VIN | 4.3 | 18 | V | 3 | ||
| Junction Temperature Range | TJ | -40 | 125 | °C | 3 | ||
| Ambient Temperature Range | TA | -40 | 85 | °C | 3 | ||
| Shutdown Current | ISHDN | 4 | µA | VEN = 0V | 3 | ||
| Switch-On Resistance High-Side | RDS(ON)_H | 90 | 105 | mΩ | VBOOT−SW = 4.8V | 3 | |
| Switch-On Resistance Low-Side | RDS(ON)_L | 45 | 65 | mΩ | VIN = 5V | 3 | |
| Current Limit (valley current) | ILIM | 3.7 | 4.4 | 5 | A | Valley Current | 3 |
| Feedback Threshold Voltage | VFB | 591 | 600 | 609 | mV | In CCM Mode | 3 |
| EN Input Threshold Logic-High | VEN_H | 1.19 | 1.29 | 1.39 | V | 3 | |
| EN Input Threshold Logic-Low | VEN_L | 0.93 | 1.03 | 1.13 | V | 3 | |
| VIN Under-Voltage Lockout Threshold | VUVLO | 3.55 | 3.9 | 4.25 | V | VIN Rising | 3 |
| VOUT Discharge Resistance | RDISCHG | 50 | 100 | Ω | EN = 0V, VOUT = 0.5V | 4 | |
| Output Under-Voltage Trip Threshold | UVP | 70 | 75 | 80 | % | 4 |
CAD (KiCad official)
- Symbol:
RT7295CGJ6F - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
rt7295cgj6f-etched.step/rt7295cgj6f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rt7295cgj6f.step/rt7295cgj6f.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
rt7295cgj6f.step |
97 KB | You want the bare part, or you mark your own boards. |
rt7295cgj6f-etched.step |
2.2 MB | You want the part with RT7295CGJ6F already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 522 faces against 117 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Richtek Tech datasheet (14 pp, sha256
a82c3dea3dfbe8cd, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).