RT6362GSP

{
  "slug": "rt6362gsp",
  "version": "0.1.0",
  "type": "component",
  "description": "Richtek Tech DC-DC Converters, SOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "rt6362gsp",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "rt6362gsp.kicad_sym",
    "rt6362gsp.kicad_mod",
    "rt6362gsp.glb",
    "rt6362gsp.step",
    "rt6362gsp.lbr",
    "docs/hero.png",
    "docs/rt6362gsp-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "rt6362gsp-hero.glb",
    "rt6362gsp-hero.overlay.json",
    "rt6362gsp-etched.glb"
  ],
  "component": {
    "mpn": "RT6362GSP",
    "manufacturer": "Richtek Tech",
    "package": "SOP-8-EP",
    "pin_count": 9,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/0728dd082ec76b3800ef0711fe4e037d.pdf",
    "parts": {
      "symbol": "rt6362gsp.kicad_sym",
      "footprint": "rt6362gsp.kicad_mod",
      "model_3d": "rt6362gsp-hero.glb",
      "model_3d_plain": "rt6362gsp-etched.glb",
      "model_3d_step": "rt6362gsp-etched.step",
      "model_3d_step_plain": "rt6362gsp.step",
      "lbr": "rt6362gsp.lbr"
    },
    "distributor_links": {
      "lcsc": "C3031542",
      "digikey": "1028-RT6362GSPTR-ND",
      "mouser": "835-RT6362GSP"
    },
    "distributor_check": {
      "checked_at": "2026-10-22T04:01:00Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "1028-RT6362GSPTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "835-RT6362GSP",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "BOOT",
        "type": "passive",
        "description": "Bootstrap capacitor connection node to supply the high-side gate driver; connect a 0.1µF ceramic capacitor between this pin and the SW pin."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Power input with an input voltage range of 4V to 60V; connect a suitable input capacitor between this pin and GND, usually two 2.2µF or larger ceramic capacitors with one typical capacitance of 4.7µF."
      },
      {
        "number": "3",
        "name": "EN",
        "type": "input",
        "description": "Enable control pin with internal pull-up current source; floating or a logic-high (≥1.25V) enables the converter, and a logic-low forces the device into shutdown mode."
      },
      {
        "number": "4",
        "name": "RT/SYNC",
        "type": "input",
        "description": "Frequency setting and external synchronization input; connect a resistor from this pin to GND to set the switching frequency, or tie it to a clock source to synchronize to an external frequency."
      },
      {
        "number": "5",
        "name": "FB",
        "type": "input",
        "description": "Output voltage sense input through a resistive divider, with a feedback reference voltage of 0.8V typically."
      },
      {
        "number": "6",
        "name": "COMP",
        "type": "passive",
        "description": "Compensation node; external compensation elements connected to this pin stabilize the control loop."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Ground; provides the ground return path for the control circuitry."
      },
      {
        "number": "8",
        "name": "SW",
        "type": "power_out",
        "description": "Switch node that supplies power to the output; connect the output LC filter from SW to the output load."
      },
      {
        "number": "9",
        "name": "PAD",
        "type": "passive",
        "description": "Exposed pad is internally unconnected and must be soldered to a large PCB copper area for maximum power dissipation."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Exposed pad is labeled 9 in the SOP-8 column and is stated to be internally unconnected; type set to; Datasheet text shows '0.1F' for the BOOT capacitor; the micro symbol appears dropped in extraction a; The EN logic-high threshold shows '  1.25V' in the extracted text with the comparison symbol missing"
        ],
        "pages_sent": 4,
        "cost_usd": 0.0271,
        "at": "2026-10-22T03:59:09"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/0728dd082ec76b3800ef0711fe4e037d.pdf",
        "pages": 38,
        "sha256": "b92f7b4ec3be0cd1",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "rt6362gsp.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.55
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "2d6f7e774e8143e3320cbd59eb5be9f3b7864614644e3b072006e1eb05fb7fa6",
        "checked": "2026-10-22",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "rt6362gsp-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.55
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "2cf60d51504e7b5fadb0bef76aba38e8df13c6237f9246af5d617bdb5544478a",
        "checked": "2026-10-22",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}