main
History Download
Ray Publish 0.1.0 f3ac07c

RT5762CHGH6F

Richtek Tech · DC-DC Converters · SOT-563

RT5762CHGH6F from Richtek Tech, in a SOT-563. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FB input Output voltage sense input, connected to the output through a resistive divider, with a feedback reference of 0.6V typical.
2 GND power_in Power ground for the device.
3 VIN power_in Power input with a range of 2.5V to 6V; input bypass MLCC capacitance higher than 10µF is recommended, connected directly to this pin and the GND pins.
4 SW output Switch node between the internal switch and the synchronous rectifier, connected to the inductor.
5 EN input Enable control input: a logic high enables the device and connecting it to ground disables the device.
6 NC unconnected No internal connection on the RT5762C/D variant; pin 6 is PG (open-drain power-good output) on the RT5762A/B/E/F only.

Key specifications

Parameter Value
Manufacturer Richtek Tech
Package SOT-563
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Input Operating Voltage VIN 2.5 6 V 11
Under-Voltage Lockout Threshold VUVLO 2.15 2.3 2.45 V VIN rising 11
Supply Current (Shutdown) ISHDN 15 µA VEN = 0V 11
Supply Current (Quiescent) IQ 23 35 µA VEN = 2V, VFB = 0.7V, not switching 11
Soft-Start Time tSS 1 1.5 2.4 ms 0%VOUT to 95%VOUT 11
EN high-level input voltage VEN_H 0.8 1.2 V 11
EN low-level input voltage VEN_L 0.4 0.85 V 11
Feedback Threshold Voltage VFB 0.594 0.6 0.606 V 11
Feedback Input Current IFB 0.1 0.4 µA VFB = 0.6V, TA = 25°C 11
High-Side On-Resistance RDS(ON)_H 100 120 mΩ 11
Low-Side On-Resistance RDS(ON)_L 70 85 mΩ 11
High-Side Switch Current Limit ILIM_H 3 3.45 3.9 A VIN = 3.6V, VOUT = 1.2V, L = 1.5µH, TA = 25C 11
Low-Side Switch Valley Current Limit ILIM_L 2 2.3 2.6 A 11
Switching Frequency fSW 1 1.2 1.44 MHz 11
Supply Input Operating Voltage (recommended) VIN 2.5 6 V 10
Output Voltage (recommended) VOUT 0.6 V Printed upper limit is VIN 10
Junction Temperature Range (recommended) TJ -40 125 °C 10
Supply Input Voltage VIN -0.3 6.5 V 10
VIN to SW VIN-SW -0.3 6.5 V 10
VIN to SW (transient) VIN-SW -2.5 9 V t ≤ 10ns 10
Switch Voltage SW -0.3 6.5 V 10
Switch Voltage (transient) SW -2.5 9 V t ≤ 10ns 10
Other Pins -0.3 6.5 V 10
Lead Temperature (Soldering) 260 °C Soldering, 10 sec. 10
Junction Temperature TJ 150 °C 10
Storage Temperature Range TSTG -65 150 °C 10
ESD Susceptibility HBM 2 kV HBM (Human Body Model) 10
Junction-to-ambient thermal resistance (JEDEC standard), SOT-563 (FC) JA 108 °C/W JEDEC standard 10
Junction-to-case (top) thermal resistance, SOT-563 (FC) JC(Top) 109 °C/W 10
Junction-to-case (bottom) thermal resistance, SOT-563 (FC) JC(Bottom) 35.4 °C/W 10
Junction-to-ambient thermal resistance (specific EVB), SOT-563 (FC) JA(EVB) 102.5 °C/W specific EVB 10
Junction-to-top characterization parameter, SOT-563 (FC) JC(Top) 20.7 °C/W 10
Junction-to-board characterization parameter, SOT-563 (FC) JB 83.1 °C/W 10

CAD (KiCad official)

  • Symbol: RT5762CHGH6F
  • Footprint: Package_TO_SOT_SMD:SOT-563
  • 3D model: SOT-563 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Richtek Tech datasheet (31 pp, sha256 2eddc58d5a24bb42, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF