main
Ray rsm485ct: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) bd008e4
{
  "schema_version": 1,
  "type": "component",
  "slug": "rsm485ct",
  "title": "RSM485CT",
  "brief": "VISOM RS485 Bus Modules, DIP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "iot-communication modules",
    "rsm485ct"
  ],
  "component": {
    "mpn": "RSM485CT",
    "manufacturer": "VISOM",
    "package": "DIP-8",
    "pin_count": 8,
    "category": "IoT/Communication Modules",
    "subcategory": "RS485 Bus Modules",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588894923076063233",
    "parts": {
      "symbol": "rsm485ct.kicad_sym",
      "footprint": "rsm485ct.kicad_mod",
      "model_3d": "rsm485ct-etched.glb",
      "model_3d_plain": "rsm485ct.glb",
      "model_3d_step": "rsm485ct-etched.step",
      "model_3d_step_plain": "rsm485ct.step",
      "lbr": "rsm485ct.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply input positive. 5V nominal (4.75V-5.25V) for RSM485CT. Typical quiescent current 28 mA, max operating current 130 mA. Absolute max input voltage 7V; no reverse-polarity protection."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Power supply input ground. Reference for VCC and the primary/UART side (TXD, RXD, CON). Galvanically isolated from RGND (2.5 kVDC isolation)."
      },
      {
        "number": "3",
        "name": "TXD",
        "type": "input",
        "description": "UART transmit data input from host MCU. 5V logic (VIH ≥ 0.7·VCC, VIL ≤ 0.3·VCC). Internal 10 kΩ pull-up; drive current 2 mA. Data on TXD is transmitted onto the A/B bus when CON is low."
      },
      {
        "number": "4",
        "name": "RXD",
        "type": "output",
        "description": "UART receive data output to host MCU. Push-pull output (VOH ≥ VCC-0.4 V, VOL ≤ 0.4 V at 4 mA), max output current 10 mA. Reflects the A/B bus differential state when CON is high."
      },
      {
        "number": "5",
        "name": "CON",
        "type": "input",
        "description": "Transmit/receive direction control. CON=0 (low) → transmit mode (drives A/B from TXD); CON=1 (high) → receive mode (drives RXD from A/B). Note: polarity is inverted from a standard RS-485 transceiver's DE/RE. VIH ≥ 3.8V (RSM485CT), VIL ≤ 0.3·VCC. Drive current 5 mA."
      },
      {
        "number": "8",
        "name": "B",
        "type": "bidirectional",
        "description": "RS-485 differential bus line B (inverting). Internally biased with 22 kΩ pull-down/up network; integrated ESD protection. Differential output voltage |A-B| ≥ 1.5V into 54Ω load; input impedance ≥ 96 kΩ over -7V ≤ VCM ≤ +12V."
      },
      {
        "number": "9",
        "name": "A",
        "type": "bidirectional",
        "description": "RS-485 differential bus line A (non-inverting). Internally biased with 22 kΩ pull-down/up network; integrated ESD protection. Paired with B to form the isolated RS-485 differential bus."
      },
      {
        "number": "10",
        "name": "RGND",
        "type": "power_out",
        "description": "Isolated output-side ground (secondary side reference for the A/B RS-485 bus). Galvanically isolated from GND (pin 2) by 2.5 kVDC. May be left floating if not used; in noisy environments connect to cable shield / earth through impedance network per §9.5."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588894923076063233",
        "pages": 5,
        "sha256": "ca9943a215648f36",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "rsm485ct.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "rsm485ct-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "b5629439aa659f80f9790f63230c469a207b59c7ba22523b04085cfe67a6a28b",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "VISOM",
      "Package": "DIP-8",
      "Category": "IoT/Communication Modules",
      "Pins": "8"
    }
  },
  "variants": [
    {
      "mpn": "RSM485CT",
      "kind": "packaging"
    },
    {
      "mpn": "RSM485CTRSM3485CT",
      "kind": "packaging"
    }
  ],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "rsm485ct"
  ],
  "discovery_pitch": "RSM485CT (VISOM) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "rsm485ct.kicad_sym",
    "rsm485ct.kicad_mod",
    "rsm485ct.glb",
    "rsm485ct.step",
    "rsm485ct.lbr",
    "docs/hero.png",
    "docs/rsm485ct-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-25T05:13:11.317Z"
}