Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

RSC6120S

REASUNOS · LED Drivers · SOP-14

RSC6120S from REASUNOS, in a SOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in High-voltage startup input. Connects to the rectified HV bus (rated 150-600V) and feeds the internal 2mA HV startup current source that charges VCC on power-up.
2 NC unconnected No connect. Leave floating or tie to ground per PCB layout convenience.
3 VCC power_in Signal-side supply input, absolute max −0.3 to 20V, operating range 8-20V. UVLO turn-on ≈15V (VCC_On) and turn-off ≈8.7V (VCC_Off); quiescent current ≈720µA.
4 NC unconnected No connect. Leave floating or tie to ground per PCB layout convenience.
5 FB input Voltage feedback input to the error amplifier / OVP comparator, absolute max −0.3 to 5V. OVP trips at V_FB ≈1.20V (recovers at ≈1.08V).
6 CS input Current-sense input from the resonant tank sense network, absolute max −0.3 to 5V. Feeds the rectifier/EA loop; zero-current detect threshold V_ZCD ≈154mV and cycle-by-cycle OCP threshold V_OCP ≈500mV (480/520mV min/max).
7 GND power_in Signal ground / analog return for the control-side circuitry.
8 PGND power_in Power ground return for the low-side gate driver. Keep the loop from PGND through the low-side MOSFET source back to the bulk cap short.
9 LO output Low-side half-bridge gate-drive output, referenced to PGND. Absolute max −0.3V to VCC+0.3V; ~60ns rise / 35ns fall into 1nF; peak source 550mA / peak sink 1000mA on the RSC6120S.
10 PVCC power_in Power-side supply for the low-side gate driver, absolute max −0.3 to 20V. Typically tied to VCC through a small RC decoupling network.
11 NC unconnected No connect. Leave floating or tie to ground per PCB layout convenience.
12 HS power_in High-side floating return (half-bridge switching node reference). Absolute max HB−20V to HB+0.3V; connects to the source of the high-side MOSFET and the bottom of the bootstrap capacitor.
13 HO output High-side floating gate-drive output referenced to HS. Absolute max HS−0.3V to HB+0.3V; ~30ns rise / 35ns fall into 1nF; peak source 550mA / peak sink 1000mA on the RSC6120S.
14 HB power_in High-side floating bootstrap supply, absolute max −0.3 to 600V (relative to GND). Bootstrap capacitor connects between HB and HS to power the high-side driver.

Key specifications

Parameter Value
Manufacturer REASUNOS
Package SOP-14
Category LED Drivers
Pins 14

CAD (KiCad official)

  • Symbol: RSC6120S
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOP-14 (KiCad packages3D, STEP)
  • 3D model files: rsc6120s-etched.step / rsc6120s-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rsc6120s.step / rsc6120s.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: REASUNOS datasheet (None pp, sha256 1096eb44b95a06d2, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF