component

RS8920XK-G

Public Made by Adom

by adom

Jiangsu RUNIC Tech Comparators, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentamplifiers-comparatorsrs8920xk-gfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
rs8920xk-g / README.md
History Download
Ray Publish 0.1.0 57857b1 14d ago

RS8920XK-G

Jiangsu RUNIC Tech · Comparators · SOP-8

RS8920XK-G from Jiangsu RUNIC Tech, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTA output Channel A open-drain comparator output, which needs an external pull-up and may be wire-ANDed with other open-collector outputs.
2 -INA input Channel A inverting input; the common-mode voltage range is V- to (V+) - 1.5V, and input signals should stay within (V-) - 0.3V to (V+) + 0.3V.
3 +INA input Channel A noninverting input with the same common-mode range of V- to (V+) - 1.5V, and input signals beyond the rails by more than 0.3V should be current-limited to 10mA or less.
4 V- power_in Negative (lowest) power supply; the device runs from 2.8V to 36V single-supply or ±1.4V to ±18V dual-supply.
5 +INB input Channel B noninverting input with the same common-mode range of V- to (V+) - 1.5V, and input signals beyond the rails by more than 0.3V should be current-limited to 10mA or less.
6 -INB input Channel B inverting input; the common-mode voltage range is V- to (V+) - 1.5V, and input signals should stay within (V-) - 0.3V to (V+) + 0.3V.
7 OUTB output Channel B open-drain comparator output, which needs an external pull-up and may be wire-ANDed with other open-collector outputs.
8 V+ power_in Positive (highest) power supply; the supply range is 2.8V to 36V with an absolute maximum of 40V.

Key specifications

Parameter Value
Manufacturer Jiangsu RUNIC Tech
Package SOP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply, VS=(V+) - (V-) VS 40 V 6
Signal input pin current -10 10 mA 6
Signal output pin current -20 20 mA 6
Operating range, TA TA -40 125 °C 6
Junction, TJ TJ -40 150 °C 6
Storage, Tstg Tstg -55 150 °C 6
Supply voltage, single-supply VS 2.8 36 V 6
Supply voltage, dual-supply (printed ±1.4 / ±18) VS 1.4 18 V 6
VS Operating Voltage Range VS 2.8 36 V 7
IQ Quiescent Current, 25C IQ 370 450 μA VS = 36V, no load; 25C 7
IQ Quiescent Current, Full IQ 390 μA VS = 36V, no load; Full 7
Input offset voltage, 25C VOS -4.5 0.8 4.5 mV VCM = 0V; 25C 7
Input offset voltage, Full VOS -2 2 mV VCM = 0V; Full 7
Input Bias Current IB -20 20 pA VCM = 0V; 25C 7
Input Offset Current IOS -20 20 pA VCM = 0V; 25C 7
Maximum Input Difference Bias Current, 25C /IID/ 2 100 nA VS = ±18V, VID = ±18V; 25C 7
Maximum Input Difference Bias Current, Full /IID/ 100 nA VS = ±18V, VID = ±18V; Full 7
Low-Level output voltage, 25C VOL 160 500 mV Isink = 8mA, VID = -0.2V; 25C 7
Low-Level output voltage, Full VOL 320 mV Isink = 8mA, VID = -0.2V; Full 7
Output Short-Circuit Current ISINK 40 50 60 mA VOL = (V-) + 1.5V, VID = -0.2V; 25C 7
High-Level Output Leakage Current, VOH=2.8V, 25C IOH-LKG 2 20 nA VOH = 2.8V, VID = 0.2V; 25C 7
High-Level Output Leakage Current, VOH=2.8V, Full IOH-LKG 42 nA VOH = 2.8V, VID = 0.2V; Full 7
High-Level Output Leakage Current, VOH=36V, 25C IOH-LKG 5 20 nA VOH = 36V, VID = 0.2V; 25C 7
High-Level Output Leakage Current, VOH=36V, Full IOH-LKG 100 nA VOH = 36V, VID = 0.2V; Full 7
Package thermal impedance, SOP8 θJA 110 °C/W JESD-51, soldered to PCB 6
Input Hysteresis 2 mV 25C 7
Common Mode Rejection Ratio CMRR 116 dB VS = ±18V, VCM = V- to (V+) - 1.5V; 25C 7
Power Supply Rejection Ratio PSRR 110 dB VS = 2.8V to 36V; 25C 7
Large signal differential voltage amplification AVD 100 dB VS = 36V, VOUT = 0.1V to 28.8V, RL = 120kΩ to VS; 25C 7
Propagation Delay H to L TPHL 65 ns VS = ±2.5V, CL = 15pF; Overdrive = 20mV; 25C 8
Propagation Delay H to L TPHL 40 ns VS = ±2.5V, CL = 15pF; Overdrive = 100mV; 25C 8
Fall Time tFALL 10 ns VS = ±2.5V, CL = 15pF; Overdrive = 20mV; 25C 8
Propagation Delay H to L TPHL 75 ns VS = ±18V, CL = 15pF; Overdrive = 20mV; 25C 8
Propagation Delay H to L TPHL 55 ns VS = ±18V, CL = 15pF; Overdrive = 100mV; 25C 8
Fall Time tFALL 50 ns VS = ±18V, CL = 15pF; Overdrive = 20mV; 25C 8

CAD (KiCad official)

  • Symbol: RS8920XK-G
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: rs8920xk-g-etched.step / rs8920xk-g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rs8920xk-g.step / rs8920xk-g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Jiangsu RUNIC Tech datasheet (17 pp, sha256 111d4337fc8a7146, retrieved 2026-10-14, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF