Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

RS8907XF

Jiangsu RUNIC Tech · Operational Amplifier · SOT-23-5

RS8907XF from Jiangsu RUNIC Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 +IN input Non-inverting comparator input. Rail-to-rail CMOS input; common-mode range extends from (V-)-0.1 V to (V+)+0.1 V. Input bias current typ 1 pA. Diode-clamped to supply rails; limit external swing beyond rails to <=10 mA.
2 V- power_in Negative supply / ground. In single-supply operation connect to GND. Total supply (V+ to V-) range 1.4 V to 5.5 V, 7.0 V absolute maximum.
3 -IN input Inverting comparator input. Rail-to-rail CMOS input; common-mode range extends from (V-)-0.1 V to (V+)+0.1 V. Input bias current typ 1 pA. Diode-clamped to supply rails; limit external swing beyond rails to <=10 mA.
4 OUT output Push-pull comparator output. Rail-to-rail swing (VOH ~70 mV from V+ at Io=0.1 mA, Vs=1.4 V; VOL ~35 mV from V- at Io=-0.1 mA). Short-circuit sink 42 mA typ / source 38 mA typ at Vs=5 V. Drives capacitive or resistive loads without external pull-up.
5 V+ power_in Positive supply. Operating range 1.4 V to 5.5 V (7.0 V absolute maximum V+ to V-). Quiescent current 400 nA typ at Vs=1.4 V. Bypass with a local ceramic capacitor to V-.

Key specifications

Parameter Value
Manufacturer Jiangsu RUNIC Tech
Package SOT-23-5
Category Op-amp/Cmp
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • RS8907XF
  • RS8907XFXC5

CAD (KiCad official)

  • Symbol: RS8907XF
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: rs8907xf-etched.step / rs8907xf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rs8907xf.step / rs8907xf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Jiangsu RUNIC Tech datasheet (6 pp, sha256 570e6d98276ba673, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF