main
History Download
Ray Publish 0.1.0 05494a9

RS8557XF-Q1

Jiangsu RUNIC Tech · Precision OpAmps · SOT-23-5

RS8557XF-Q1 from Jiangsu RUNIC Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Amplifier output, which swings rail to rail and is diode-clamped to the supply rails with a continuous current limit of ±55 mA beyond them.
2 V- power_in Negative (lowest) power supply, the reference for the common-mode range of (V-)-0.1 V to (V+)+0.1 V.
3 +IN input Positive (noninverting) input, with input voltage limited to (V-)-0.5 V to (V+)+0.5 V and input current limited to 10 mA when driven beyond the rails.
4 -IN input Negative (inverting) input, with input voltage limited to (V-)-0.5 V to (V+)+0.5 V and input current limited to 10 mA when driven beyond the rails.
5 V+ power_in Positive (highest) power supply, with a supply voltage range of +2.7 V to +5.5 V single-supply and an absolute maximum of 7 V.

Key specifications

Parameter Value
Manufacturer Jiangsu RUNIC Tech
Package SOT-23-5
Category Operational Amplifier/Comparator
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (absolute maximum) VS 7 V 7
Signal input pin current -10 10 mA 7
Signal output pin current -55 55 mA 7
Operating range, free-air temperature TA -40 125 °C 7
Junction temperature TJ -40 150 °C 7
Storage temperature Tstg -65 150 °C 7
Supply voltage, single-supply VS 2.7 5.5 V Single-supply 7
Supply voltage, dual-supply VS 1.35 2.75 V Dual-supply, printed as ±1.35 (MIN column) and ±2.75 (MAX column) 7
Input offset voltage VOS -50 10 50 μV VCM= VS/2; 25C 8
Input offset voltage (full temperature range) VOS -100 100 μV VCM= VS/2; Full (-40°C to +125°C) 8
Input offset voltage average drift VOS Tc -0.05 0.05 μV/°C Full 8
Power-supply rejection ratio PSRR 105 120 dB VS= +2.7V to +5.5V; VCM<VS-2V; 25C 8
Power-supply rejection ratio (full temperature range) PSRR 90 dB VS= +2.7V to +5.5V; VCM<VS-2V; Full 8
Input bias current IB -50 50 pA VCM = VS/2; 25C 8
Input offset current IOS -10 10 pA VCM = VS/2; 25C 8
Common-mode rejection ratio CMRR 105 120 dB (V-)-0.1V<VCM<(V+)+0.1V; 25C 8
Common-mode rejection ratio (full temperature range) CMRR 100 dB (V-)-0.1V<VCM<(V+)+0.1V; Full 8
Open-loop voltage gain AOL 105 120 dB RL= 10KΩ; VO= 0.3V to 4.7V; 25C 8
Open-loop voltage gain (full temperature range) AOL 105 dB RL= 10KΩ; VO= 0.3V to 4.7V; Full 8
Voltage output swing from rail, high VOH 8 20 mV RL=10 KΩ to GND; 25C 8
Voltage output swing from rail, high (full temperature range) VOH 30 mV RL=10 KΩ to GND; Full 8
Voltage output swing from rail, low VOL 8 20 mV RL=10 KΩ to V+; 25C 8
Voltage output swing from rail, low (full temperature range) VOL 30 mV RL=10 KΩ to V+; Full 8
Short-circuit current ISC -30 48 mA 25C; short-circuit test is momentary 8
Short-circuit current (full temperature range) ISC -25 25 mA Full; short-circuit test is momentary 8
Operating voltage range VS 2.7 5.5 V 25C 8
Quiescent current per amplifier IQ 0.65 1.05 mA VS=5V; 25C 8
Quiescent current per amplifier (full temperature range) IQ 1.1 mA VS=5V; Full 8
Package thermal impedance, SOT23-5 θJA 230 °C/W Package soldered directly onto PCB, JESD-51 7

CAD (KiCad official)

  • Symbol: RS8557XF-Q1
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.25 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: rs8557xf-q1-etched.step / rs8557xf-q1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rs8557xf-q1.step / rs8557xf-q1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Jiangsu RUNIC Tech datasheet (23 pp, sha256 7ca0e7907aa5ebd5, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF