main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs rs8552xk: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
package.json Publish 0.2.1 · Ray
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
page.json Publish 0.2.1 · Ray
README.md rs8552xk: specified limits as data (metadata.characteristics, 17 rows from the datasheet) · Ray
rs8552xk-etched.fit.json rs8552xk: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
rs8552xk-etched.glb rs8552xk: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wi… · Ray
rs8552xk-etched.step rs8552xk: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wi… · Ray
rs8552xk-hero.glb rs8552xk: hero from the plain model · Ray
rs8552xk-hero.overlay.json rs8552xk: hero from the plain model · Ray
rs8552xk.glb Publish 0.1.0 · Ray
rs8552xk.kicad_mod Publish 0.1.0 · Ray
rs8552xk.kicad_sym Publish 0.1.0 · Ray
rs8552xk.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect an… · Ray
rs8552xk.step Publish 0.1.0 · Ray

RS8552XK

Jiangsu RUNIC Tech · Precision OpAmps · SOIC-8

RS8552XK from Jiangsu RUNIC Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT A output Output of amplifier A. Rail-to-rail CMOS output, short-circuit current typ. 50 mA, slew rate 2.7 V/µs, gain-bandwidth product 4.5 MHz.
2 -IN A input Inverting input of amplifier A. High-impedance CMOS input; input bias current typ. 50 pA; common-mode range extends 0.1 V beyond each supply rail.
3 +IN A input Non-inverting input of amplifier A. High-impedance CMOS input; input bias current typ. 50 pA; rail-to-rail common-mode range.
4 V- power_in Negative supply pin (or ground in single-supply operation). Total V+ to V- range: +2.7 V to +5.5 V (absolute max 7.0 V). Place a 0.1 µF decoupling capacitor close to the pin.
5 +IN B input Non-inverting input of amplifier B. High-impedance CMOS input; input bias current typ. 50 pA; rail-to-rail common-mode range.
6 -IN B input Inverting input of amplifier B. High-impedance CMOS input; input bias current typ. 50 pA; common-mode range extends 0.1 V beyond each supply rail.
7 OUT B output Output of amplifier B. Rail-to-rail CMOS output, short-circuit current typ. 50 mA, slew rate 2.7 V/µs, gain-bandwidth product 4.5 MHz.
8 V+ power_in Positive supply pin. Total V+ to V- range: +2.7 V to +5.5 V (absolute max 7.0 V). Place a 0.1 µF decoupling capacitor close to the pin.

Key specifications

Parameter Value
Manufacturer Jiangsu RUNIC Tech
Package SOIC-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • RS8552XK
  • RS8552XM

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage Vos 1 5 uV VCM = Vs/2 4
Input Offset Drift (VS temperature) dVos/dT 0.005 0.05 μV/°C 4
Power Supply Rejection Ratio PSRR 110 130 dB VS = +2.7V to +5.5V, VCM = 0 4
Common-Mode Rejection Ratio CMRR 110 130 dB (V–) – 0.1V < VCM < (V+)+ 0.1V 4
Open-Loop Voltage Gain AOL 110 130 dB RL=10KΩ, VO=0.3V to 4.7V, -40°C~125°C 4
Output Voltage High (RL=100 kΩ to GND) VOH 4.99 4.998 V RL=100 KΩ to GND 4
Output Voltage High (RL=10 kΩ to GND) VOH 4.95 4.98 V RL=10 KΩ to GND 4
Output Voltage Low (RL=100 kΩ to V+) VOL 1 10 mV RL=100 KΩ to V+ 4
Output Voltage Low (RL=10 kΩ to V+) VOL 10 30 mV RL=10 KΩ to V+ 4
Quiescent Current per Amplifier IQ 640 870 uA 4
Operating Voltage Range VS 2.7 5.5 V 4
Input Terminals Current II -10 10 mA Input terminals; see note (2) 3
Storage Temperature TSTG -65 150 °C 3
Operating Temperature TA -40 125 °C 3
Junction Temperature TJ 150 °C 3
ESD MM 400 V MM 3
Package Thermal Resistance (SOIC-8) θJA 150 °C/W @ TA = +25°C 3

CAD (KiCad official)

  • Symbol: RS8552XK
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: rs8552xk-etched.step / rs8552xk-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rs8552xk.step / rs8552xk.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
rs8552xk.step 122 KB You want the bare part, or you mark your own boards.
rs8552xk-etched.step 2.1 MB You want the part with RS8552XK already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 502 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Jiangsu RUNIC Tech datasheet (14 pp, sha256 03823b61f9fd241f, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF