3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownRS8514XQ
Jiangsu RUNIC Tech · Precision Op Amps · TSSOP-14
RS8514XQ from Jiangsu RUNIC Tech, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Output of channel A. |
| 2 | -INA | input | Inverting input of channel A. |
| 3 | +INA | input | Noninverting input of channel A. |
| 4 | V+ | power_in | Positive (highest) power supply; the datasheet specifies a supply range of +2.3 V to +5.5 V single-supply (±1.15 V to ±2.75 V dual). |
| 5 | +INB | input | Noninverting input of channel B. |
| 6 | -INB | input | Inverting input of channel B. |
| 7 | OUTB | output | Output of channel B. |
| 8 | OUTC | output | Output of channel C. |
| 9 | -INC | input | Inverting input of channel C. |
| 10 | +INC | input | Noninverting input of channel C. |
| 11 | V- | power_in | Negative (lowest) power supply, serving as the reference for the input and output voltage ranges. |
| 12 | +IND | input | Noninverting input of channel D. |
| 13 | -IND | input | Inverting input of channel D. |
| 14 | OUTD | output | Output of channel D. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | TSSOP-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -40 | 7 | 40 | uV | VCM= VS/2 | 9 |
| Power-Supply Rejection Ratio | PSRR | 110 | 130 | dB | VS= +2.3V to +5.5V, VCM= 0 | 9 | |
| Common-Mode Rejection Ratio | CMRR | 110 | 130 | dB | (V-) -0.1V < VCM < (V+)+ 0.1V | 9 | |
| Open-Loop Voltage Gain | AOL | 110 | 130 | dB | RL= 10KΩ, VO= 0.3V to 4.7V, TA= -40°C to 125°C | 9 | |
| Output Voltage High | VOH | 4.99 | 4.998 | V | RL=100 KΩ to GND | 9 | |
| Output Voltage High | VOH | 4.95 | 4.98 | V | RL=10 KΩ to GND | 9 | |
| Output Voltage Low | VOL | 1 | 10 | mV | RL=100 KΩ to V+ | 9 | |
| Output Voltage Low | VOL | 10 | 30 | mV | RL=10 KΩ to V+ | 9 | |
| Operating Voltage Range | VS | 2.3 | 5.5 | V | 9 | ||
| Quiescent Current / Amplifier | IQ | 60 | 87 | uA | 9 | ||
| Quiescent Current in Shutdown | IQSD | 1 | 5 | uA | 10 | ||
| Shutdown Logic Low Input Voltage | VL | 0 | 0.8 | V | shutdown | 10 | |
| Input Voltage Average Drift | Vos Tc | 0.05 | 0.2 | uV/°C | 9 | ||
| Supply Voltage (absolute maximum) | Vs | 7 | V | Supply, Vs=(V+) - (V-) | 6 | ||
| Signal Input Pin Current | -10 | 10 | mA | Signal input pin | 6 | ||
| Signal Output Pin Current | -55 | 55 | mA | Signal output pin | 6 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | Over operating free-air temperature range | 6 | |
| Junction Temperature | TJ | -40 | 150 | °C | 6 | ||
| Storage Temperature | Tstg | -65 | 150 | °C | 6 | ||
| Single-Supply Operating Voltage | 2.3 | 5.5 | V | Supply voltage, single-supply | 6 | ||
| Junction-to-ambient thermal resistance | RθJA | 120.8 | °C/W | TSSOP-14 | 7 | ||
| Junction-to-case (top) thermal resistance | RθJC (top) | 34.3 | °C/W | TSSOP-14 | 7 | ||
| Junction-to-board thermal resistance | RθJB | 62.8 | °C/W | TSSOP-14 | 7 | ||
| Junction-to-top characterization parameter | ΨJT | 1 | °C/W | TSSOP-14 | 7 | ||
| Junction-to-board characterization parameter | ΨJB | 56.5 | °C/W | TSSOP-14 | 7 |
CAD (KiCad official)
- Symbol:
RS8514XQ - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
rs8514xq-etched.step/rs8514xq-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rs8514xq.step/rs8514xq.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Jiangsu RUNIC Tech datasheet (23 pp, sha256
de355172722139e2, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).