main
Ray
Publish 0.1.0
51af084
RS8442XM
Jiangsu RUNIC Tech · Operational Amplifier · MSOP-8
RS8442XM from Jiangsu RUNIC Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Output of channel A, which swings rail to rail and is rated for signal output current of ±100 mA (absolute maximum) with continuous short-circuit protection. |
| 2 | -INA | input | Inverting input of channel A, which operates normally from the negative supply rail up to 1.5 V below the positive supply rail. |
| 3 | +INA | input | Noninverting input of channel A, which operates normally from the negative supply rail up to 1.5 V below the positive supply rail. |
| 4 | V- | power_in | Negative (lowest) power supply or ground for single-supply operation, within a 3 V to 32 V single-supply or ±1.5 V to ±16 V dual-supply range. |
| 5 | +INB | input | Noninverting input of channel B, which operates normally from the negative supply rail up to 1.5 V below the positive supply rail. |
| 6 | -INB | input | Inverting input of channel B, which operates normally from the negative supply rail up to 1.5 V below the positive supply rail. |
| 7 | OUTB | output | Output of channel B, which swings rail to rail and is rated for signal output current of ±100 mA (absolute maximum) with continuous short-circuit protection. |
| 8 | V+ | power_in | Positive (highest) power supply, with total supply Vs = (V+) − (V−) of 3 V to 32 V single-supply (absolute maximum 36 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | MSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage Vs=(V+)-(V-) | Vs | -0.7 | 36 | V | Vs=(V+)-(V-) | 7 | |
| Signal input pin voltage | -0.2 | 0.2 | V | Printed as (V-)-0.2 to (V+)+0.2; min and max are offsets from the supply rails | 7 | ||
| Signal output pin voltage | -0.2 | 0.2 | V | Printed as (V-)-0.2 to (V+)+0.2; min and max are offsets from the supply rails | 7 | ||
| Signal input pin current | -10 | 10 | mA | Signal input pin | 7 | ||
| Signal output pin current | -100 | 100 | mA | Signal output pin | 7 | ||
| Operating range, TA | TA | -40 | 125 | °C | Operating range | 7 | |
| Junction temperature | TJ | -40 | 150 | °C | Junction | 7 | |
| Storage temperature | Tstg | -55 | 150 | °C | Storage | 7 | |
| ESD Human-body model (HBM) | V(ESD) | -2000 | 2000 | V | Human-body model (HBM), printed as ±2000 | 7 | |
| ESD Charged-device model (CDM) | V(ESD) | -1500 | 1500 | V | Charged-device model (CDM), printed as ±1500 | 7 | |
| Supply voltage, single-supply | Vs | 3 | 32 | V | Single-supply | 7 | |
| Supply voltage, dual-supply | Vs | 1.5 | 16 | V | Dual-supply; printed ±1.5 to ±16 V per rail, magnitudes shown | 7 | |
| Package thermal impedance MSOP8 | θJA | 170 | °C/W | MSOP8, JESD-51 | 7 | ||
| Vs Operating Voltage Range | Vs | 3 | 32 | V | 25C | 8 | |
| Quiescent Current Per Amplifier | IQ | 0.44 | 0.7 | mA | Vs=±2.5V, Io=0mA, 25C | 8 | |
| Quiescent Current Per Amplifier | IQ | 0.8 | mA | Vs=±2.5V, Io=0mA, Full | 8 | ||
| Quiescent Current Per Amplifier | IQ | 0.52 | 0.8 | mA | Vs=±16V, Io=0mA, 25C | 8 | |
| Quiescent Current Per Amplifier | IQ | 0.9 | mA | Vs=±16V, Io=0mA, Full | 8 | ||
| Power-Supply Rejection Ratio | PSRR | 95 | 120 | dB | Vs=5V to 32V, 25C | 8 | |
| Power-Supply Rejection Ratio | PSRR | 90 | dB | Vs=5V to 32V, Full | 8 | ||
| Input Offset Voltage | Vos | -1 | 0.8 | 1 | mV | VCM= VS/2, 25C; typ printed ±0.8 | 8 |
| Input Offset Voltage | Vos | -1.1 | 1.1 | mV | VCM= VS/2, Full; printed ±1.1 | 8 | |
| Input Offset Voltage Average Drift | Vos Tc | 2 | uV/C | Full | 8 | ||
| Input Bias Current | IB | -25 | 10 | 25 | pA | VCM=0V, 25C; typ printed ±10, max printed ±25 | 8 |
| Input Bias Current | IB | -7000 | 7000 | pA | VCM=0V, Full; printed ±7000 | 8 | |
| Input Offset Current | IOS | 10 | pA | VCM=0V, 25C; printed ±10 | 8 | ||
| Input Offset Current | IOS | -7000 | 7000 | pA | VCM=0V, Full; printed ±7000 | 8 | |
| Common-Mode Voltage Range | VCM | -1.5 | V | Vs= ±16V, 25C; max printed as (V+)-1.5 V, min is (V-) | 8 | ||
| Common-Mode Rejection Ratio | CMRR | 85 | 120 | dB | Vs= ±16V, VCM=-16V to 14.5V, 25C | 8 | |
| Common-Mode Rejection Ratio | CMRR | 80 | dB | Vs= ±16V, VCM=-16V to 14.5V, Full | 8 | ||
| Open-Loop Voltage Gain | AOL | 100 | 120 | dB | RL=10KΩ, Vo=(V-)+0.6V to (V+)-0.6V, 25C | 8 | |
| Open-Loop Voltage Gain | AOL | 85 | dB | RL=10KΩ, Vo=(V-)+0.6V to (V+)-0.6V, Full | 8 | ||
| Output Swing high | VOH | 15.65 | V | Vs=±16V, RL=10KΩ, 25C | 8 | ||
| Output Swing low | VOL | -15.65 | V | Vs=±16V, RL=10KΩ, 25C | 8 | ||
| Short-circuit current | ISC | 15 | 43 | mA | VS=±5V, 25C | 8 | |
| Short-circuit current | ISC | 10 | mA | VS=±5V, Full | 8 | ||
| Slew Rate | SR | 9 | 15 | V/us | G=+1, CL=100pF, 25C | 8 | |
| Slew Rate | SR | 6 | V/us | G=+1, CL=100pF, Full | 8 | ||
| Gain-Bandwidth Product | GBW | 2.3 | 3.8 | MHz | 25C | 8 | |
| Gain-Bandwidth Product | GBW | 2.1 | MHz | Full | 8 | ||
| Settling Time, 0.01% | ts | 1.5 | us | VS=±2.5V, G=+1, CL=100pF, Step=2V, 25C | 8 | ||
| Phase Margin | PM | 60 | ° | VS = 32V, RL=10K, CL=100pF, 25C | 8 | ||
| Gain Margin | GM | 15 | VS = 32V, RL=10K, CL=100pF, 25C | 8 | |||
| Overload Recovery Time | tOR | 0.5 | us | VIN·Gain≥VS, G=11, 25C | 8 | ||
| Turn On Time | tON | 8.5 | us | 25C | 8 | ||
| Input Voltage Noise | En | 13.5 | uVpp | f = 0.1Hz to 10Hz, Vs=±2.5V, 25C | 8 | ||
| Input Voltage Noise Density | en | 30 | nV/√Hz | f = 1KHz, 25C | 9 |
CAD (KiCad official)
- Symbol:
RS8442XM - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
rs8442xm-etched.step/rs8442xm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rs8442xm.step/rs8442xm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Jiangsu RUNIC Tech datasheet (18 pp, sha256
3f08c1ce945ee850, retrieved 2026-11-04, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# RS8442XM
**Jiangsu RUNIC Tech** · Operational Amplifier · MSOP-8
RS8442XM from Jiangsu RUNIC Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Output of channel A, which swings rail to rail and is rated for signal output current of ±100 mA (absolute maximum) with continuous short-circuit protection. |
| 2 | -INA | input | Inverting input of channel A, which operates normally from the negative supply rail up to 1.5 V below the positive supply rail. |
| 3 | +INA | input | Noninverting input of channel A, which operates normally from the negative supply rail up to 1.5 V below the positive supply rail. |
| 4 | V- | power_in | Negative (lowest) power supply or ground for single-supply operation, within a 3 V to 32 V single-supply or ±1.5 V to ±16 V dual-supply range. |
| 5 | +INB | input | Noninverting input of channel B, which operates normally from the negative supply rail up to 1.5 V below the positive supply rail. |
| 6 | -INB | input | Inverting input of channel B, which operates normally from the negative supply rail up to 1.5 V below the positive supply rail. |
| 7 | OUTB | output | Output of channel B, which swings rail to rail and is rated for signal output current of ±100 mA (absolute maximum) with continuous short-circuit protection. |
| 8 | V+ | power_in | Positive (highest) power supply, with total supply Vs = (V+) − (V−) of 3 V to 32 V single-supply (absolute maximum 36 V). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | MSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage Vs=(V+)-(V-) | Vs | -0.7 | | 36 | V | Vs=(V+)-(V-) | 7 |
| Signal input pin voltage | | -0.2 | | 0.2 | V | Printed as (V-)-0.2 to (V+)+0.2; min and max are offsets from the supply rails | 7 |
| Signal output pin voltage | | -0.2 | | 0.2 | V | Printed as (V-)-0.2 to (V+)+0.2; min and max are offsets from the supply rails | 7 |
| Signal input pin current | | -10 | | 10 | mA | Signal input pin | 7 |
| Signal output pin current | | -100 | | 100 | mA | Signal output pin | 7 |
| Operating range, TA | TA | -40 | | 125 | °C | Operating range | 7 |
| Junction temperature | TJ | -40 | | 150 | °C | Junction | 7 |
| Storage temperature | Tstg | -55 | | 150 | °C | Storage | 7 |
| ESD Human-body model (HBM) | V(ESD) | -2000 | | 2000 | V | Human-body model (HBM), printed as ±2000 | 7 |
| ESD Charged-device model (CDM) | V(ESD) | -1500 | | 1500 | V | Charged-device model (CDM), printed as ±1500 | 7 |
| Supply voltage, single-supply | Vs | 3 | | 32 | V | Single-supply | 7 |
| Supply voltage, dual-supply | Vs | 1.5 | | 16 | V | Dual-supply; printed ±1.5 to ±16 V per rail, magnitudes shown | 7 |
| Package thermal impedance MSOP8 | θJA | | 170 | | °C/W | MSOP8, JESD-51 | 7 |
| Vs Operating Voltage Range | Vs | 3 | | 32 | V | 25C | 8 |
| Quiescent Current Per Amplifier | IQ | | 0.44 | 0.7 | mA | Vs=±2.5V, Io=0mA, 25C | 8 |
| Quiescent Current Per Amplifier | IQ | | | 0.8 | mA | Vs=±2.5V, Io=0mA, Full | 8 |
| Quiescent Current Per Amplifier | IQ | | 0.52 | 0.8 | mA | Vs=±16V, Io=0mA, 25C | 8 |
| Quiescent Current Per Amplifier | IQ | | | 0.9 | mA | Vs=±16V, Io=0mA, Full | 8 |
| Power-Supply Rejection Ratio | PSRR | 95 | 120 | | dB | Vs=5V to 32V, 25C | 8 |
| Power-Supply Rejection Ratio | PSRR | 90 | | | dB | Vs=5V to 32V, Full | 8 |
| Input Offset Voltage | Vos | -1 | 0.8 | 1 | mV | VCM= VS/2, 25C; typ printed ±0.8 | 8 |
| Input Offset Voltage | Vos | -1.1 | | 1.1 | mV | VCM= VS/2, Full; printed ±1.1 | 8 |
| Input Offset Voltage Average Drift | Vos Tc | | | 2 | uV/C | Full | 8 |
| Input Bias Current | IB | -25 | 10 | 25 | pA | VCM=0V, 25C; typ printed ±10, max printed ±25 | 8 |
| Input Bias Current | IB | -7000 | | 7000 | pA | VCM=0V, Full; printed ±7000 | 8 |
| Input Offset Current | IOS | | 10 | | pA | VCM=0V, 25C; printed ±10 | 8 |
| Input Offset Current | IOS | -7000 | | 7000 | pA | VCM=0V, Full; printed ±7000 | 8 |
| Common-Mode Voltage Range | VCM | | | -1.5 | V | Vs= ±16V, 25C; max printed as (V+)-1.5 V, min is (V-) | 8 |
| Common-Mode Rejection Ratio | CMRR | 85 | 120 | | dB | Vs= ±16V, VCM=-16V to 14.5V, 25C | 8 |
| Common-Mode Rejection Ratio | CMRR | 80 | | | dB | Vs= ±16V, VCM=-16V to 14.5V, Full | 8 |
| Open-Loop Voltage Gain | AOL | 100 | 120 | | dB | RL=10KΩ, Vo=(V-)+0.6V to (V+)-0.6V, 25C | 8 |
| Open-Loop Voltage Gain | AOL | 85 | | | dB | RL=10KΩ, Vo=(V-)+0.6V to (V+)-0.6V, Full | 8 |
| Output Swing high | VOH | | 15.65 | | V | Vs=±16V, RL=10KΩ, 25C | 8 |
| Output Swing low | VOL | | -15.65 | | V | Vs=±16V, RL=10KΩ, 25C | 8 |
| Short-circuit current | ISC | 15 | 43 | | mA | VS=±5V, 25C | 8 |
| Short-circuit current | ISC | 10 | | | mA | VS=±5V, Full | 8 |
| Slew Rate | SR | 9 | 15 | | V/us | G=+1, CL=100pF, 25C | 8 |
| Slew Rate | SR | 6 | | | V/us | G=+1, CL=100pF, Full | 8 |
| Gain-Bandwidth Product | GBW | 2.3 | 3.8 | | MHz | 25C | 8 |
| Gain-Bandwidth Product | GBW | 2.1 | | | MHz | Full | 8 |
| Settling Time, 0.01% | ts | | 1.5 | | us | VS=±2.5V, G=+1, CL=100pF, Step=2V, 25C | 8 |
| Phase Margin | PM | | 60 | | ° | VS = 32V, RL=10K, CL=100pF, 25C | 8 |
| Gain Margin | GM | | 15 | | | VS = 32V, RL=10K, CL=100pF, 25C | 8 |
| Overload Recovery Time | tOR | | 0.5 | | us | VIN·Gain≥VS, G=11, 25C | 8 |
| Turn On Time | tON | | 8.5 | | us | 25C | 8 |
| Input Voltage Noise | En | | 13.5 | | uVpp | f = 0.1Hz to 10Hz, Vs=±2.5V, 25C | 8 |
| Input Voltage Noise Density | en | | 30 | | nV/√Hz | f = 1KHz, 25C | 9 |
## CAD (KiCad official)
- Symbol: `RS8442XM`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `rs8442xm-etched.step` / `rs8442xm-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `rs8442xm.step` / `rs8442xm.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Jiangsu RUNIC Tech datasheet](docs/rs8442xm-datasheet.pdf) (18 pp, sha256 `3f08c1ce945ee850`, retrieved 2026-11-04, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/rs8442xm-datasheet.pdf)