main
History Download
Ray rs8412xk: specified limits as data (metadata.characteristics, 39 rows from the datasheet) 3069ef1

RS8412XK

Jiangsu RUNIC Tech · Operational Amplifier · SOP-8

RS8412XK from Jiangsu RUNIC Tech, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTA output Output, channel A. Rail-to-rail output stage, short-circuit current ~70mA, drives capacitive loads up to 100pF.
2 -INA input Inverting input, channel A. Diode-clamped to supply rails; keep input current below ±10mA. Common-mode range extends from (V-)-0.1V to (V+)-2V.
3 +INA input Noninverting input, channel A. Diode-clamped to supply rails; keep input current below ±10mA. Common-mode range extends from (V-)-0.1V to (V+)-2V.
4 V- power_in Negative (lowest) power supply pin, or ground for single-supply operation. Total supply Vs=(V+)-(V-) may range from 3V to 36V (single) or ±1.5V to ±18V (dual).
5 +INB input Noninverting input, channel B. Diode-clamped to supply rails; keep input current below ±10mA. Common-mode range extends from (V-)-0.1V to (V+)-2V.
6 -INB input Inverting input, channel B. Diode-clamped to supply rails; keep input current below ±10mA. Common-mode range extends from (V-)-0.1V to (V+)-2V.
7 OUTB output Output, channel B. Rail-to-rail output stage, short-circuit current ~70mA, drives capacitive loads up to 100pF.
8 V+ power_in Positive (highest) power supply pin. Total supply Vs=(V+)-(V-) may range from 3V to 36V (single) or ±1.5V to ±18V (dual). PSRR typical 120dB.

Key specifications

Parameter Value
Manufacturer Jiangsu RUNIC Tech
Package SOP-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • RS8412XK
  • RS8412XKXM
  • RS8412XKXF
  • RS8412XKBXF
  • RS8412XKXP
  • RS8412XKXQ

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage, single-supply (recommended) Vs 3 36 V Single supply, Vs=(V+)-(V-) 6
Supply voltage, dual-supply (recommended) Vs 1.5 18 V Dual supply, printed as ±1.5 to ±18 6
Supply voltage (absolute maximum) Vs -0.7 36 V Vs=(V+)-(V-) 6
Signal input current -10 10 mA Signal input pin 6
Signal output current -100 100 mA Signal output pin 6
Operating free-air temperature range TA -40 125 °C 6
Junction temperature TJ 150 °C 6
Storage temperature Tstg -55 150 °C 6
ESD, human-body model V(ESD) -5000 5000 V Human-body model (HBM), printed as ±5000 6
ESD, machine model V(ESD) -200 200 V Machine model (MM), printed as ±200 6
Input offset voltage Vos -4 0.8 4 mV 25C, VCM=VS/2 8
Input offset voltage over temperature Vos -1.1 1.1 mV -40C to 125C, printed as ±1.1 8
Quiescent current per amplifier IQ 100 200 uA 25C, Vs=±2.5V, Io=0mA 8
Quiescent current per amplifier IQ 150 300 uA 25C, Vs=±18V, Io=0mA 8
Power-supply rejection ratio PSRR 98 120 dB 25C, Vs=5V to 36V 8
Input bias current IB 10 60 pA 25C, VCM=0V 8
Input bias current over temperature IB 600 pA -40C to 125C, VCM=0V 8
Input offset current IOS 10 60 pA 25C, VCM=0V 8
Input offset current over temperature IOS 600 pA -40C to 125C, VCM=0V 8
Common-mode rejection ratio CMRR 70 110 dB 25C, Vs=±2.5V, VCM=(V-)-0.1V to (V+)-2V 8
Common-mode rejection ratio CMRR 70 dB 25C, Vs=±18V, VCM=(V-)-0.1V to (V+)-2V 8
Open-loop voltage gain AOL 92 115 dB 25C, RL=10kΩ, Vo=(V-)-0.6V to (V+)-0.6V 8
Output voltage swing high VOH 17.85 V 25C, Vs=±18V, RL=10kΩ 8
Output voltage swing low VOL -17.85 V 25C, Vs=±18V, RL=10kΩ 8
Short-circuit current ISC 70 mA 25C, VS=36V, Vo=0V 8
Capacitive load drive CLOAD 100 pF 25C 8
Input offset voltage drift Vos Tc 3 uV/C -40C to 125C 8
Slew rate SR 0.67 V/us 25C, G=+1, CL=100pF 8
Gain-bandwidth product GBW 1.2 MHz 25C 8
Setting time, 0.01% ts 5 us 25C, VS=±2.5V, G=+1, CL=100pF, step=2V 8
Overload recovery time tOR 5 us 25C, VIN·Gain≥VS, G=11 8
Turn-on time tON 10 us 25C 8
Input voltage noise, 0.1 Hz to 10 Hz En 16 uVpp 25C, f=0.1Hz to 10Hz, Vs=±2.5V 8
Operating voltage range Vs 3 36 V 25C 8
Junction-to-ambient thermal resistance (SOIC-8) RθJA 124.7 °C/W SOIC-8 column 6
Junction-to-case (top) thermal resistance (SOIC-8) RθJC(top) 66.9 °C/W SOIC-8 column 6
Junction-to-board thermal resistance (SOIC-8) RθJB 67.9 °C/W SOIC-8 column 6
Junction-to-top characterization parameter (SOIC-8) ΨJT 19.2 °C/W SOIC-8 column 6
Junction-to-board characterization parameter (SOIC-8) ΨJB 67.2 °C/W SOIC-8 column 6

CAD (KiCad official)

  • Symbol: RS8412XK
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: rs8412xk-etched.step / rs8412xk-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rs8412xk.step / rs8412xk.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
rs8412xk.step 122 KB You want the bare part, or you mark your own boards.
rs8412xk-etched.step 1.9 MB You want the part with RS8412XK already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 465 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Jiangsu RUNIC Tech datasheet (15 pp, sha256 693df6c829f35f69, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF