Generated by kicad-footprint-generator · KiCad file format 20260206
RS8411BXF
Jiangsu RUNIC Tech · Operational Amplifier · SOT-23-5
RS8411BXF from Jiangsu RUNIC Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +IN | input | Positive (noninverting) op-amp input. Common-mode range (V-)-0.1V to (V+)-2V. Input bias current 10pA typical. Diode-clamped to supply rails; limit external current to <=10mA if signal exceeds rails by >0.5V. |
| 2 | V- | power_in | Negative (lowest) power supply, or ground for single-supply operation. Total supply Vs=(V+)-(V-) is 3V to 36V single-supply or ±1.5V to ±18V dual-supply. |
| 3 | -IN | input | Negative (inverting) op-amp input. Common-mode range (V-)-0.1V to (V+)-2V. Input bias current 10pA typical. Diode-clamped to supply rails; limit external current to <=10mA if signal exceeds rails by >0.5V. |
| 4 | OUT | output | Rail-to-rail op-amp output. Short-circuit current ~70mA; can drive up to 100pF specified capacitive load. Diode-clamped to supply rails; limit external short-circuit current to <=100mA. |
| 5 | V+ | power_in | Positive (highest) power supply. Total supply Vs=(V+)-(V-) is 3V to 36V single-supply or ±1.5V to ±18V dual-supply. Absolute maximum 36V between V+ and V-. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | SOT-23-5 |
| Category | Op-amp/Cmp |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
RS8411BXFRS8411BXFXKRS8411BXFXMRS8411BXFXPRS8411BXFXQ
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, single-supply (recommended) | Vs | 3 | 36 | V | Single-supply | 6 | |
| Supply voltage, dual-supply (recommended) | Vs | 1.5 | 18 | V | Dual-supply; printed as ±1.5 and ±18 V (magnitude per rail) | 6 | |
| Supply voltage, Vs=(V+)-(V-) (absolute maximum) | Vs | -0.7 | 36 | V | 6 | ||
| Signal input pin voltage | -0.2 | 0.2 | V | Printed as (V-)-0.2 to (V+)+0.2; offsets from the supply rails | 6 | ||
| Signal output pin voltage | -0.2 | 0.2 | V | Printed as (V-)-0.2 to (V+)+0.2; offsets from the supply rails | 6 | ||
| Signal input pin current | -10 | 10 | mA | 6 | |||
| Signal output pin current | -100 | 100 | mA | 6 | |||
| Operating free-air temperature range, TA | TA | -40 | 125 | °C | 6 | ||
| Junction temperature, TJ | TJ | 150 | °C | 6 | |||
| Storage temperature, Tstg | Tstg | -55 | 150 | °C | 6 | ||
| ESD Human-body model (HBM) | V(ESD) | -5000 | 5000 | V | HBM; printed as ±5000 | 6 | |
| ESD Machine model (MM) | V(ESD) | -200 | 200 | V | MM; printed as ±200 | 6 | |
| Operating voltage range | Vs | 3 | 36 | V | TJ 25C | 8 | |
| Quiescent current per amplifier | IQ | 100 | 200 | uA | Vs=±2.5V, Io=0mA, 25C | 8 | |
| Quiescent current per amplifier | IQ | 150 | 300 | uA | Vs=±18V, Io=0mA | 8 | |
| Power-supply rejection ratio | PSRR | 98 | 120 | dB | Vs=5V to 36V, 25C | 8 | |
| Input offset voltage | Vos | -4 | 0.8 | 4 | mV | VCM=VS/2, 25C | 8 |
| Input offset voltage | Vos | -1.1 | 1.1 | mV | VCM=VS/2, -40C to 125C; printed as ±1.1 | 8 | |
| Input offset voltage drift | Vos Tc | 3 | uV/C | -40C to 125C | 8 | ||
| Input bias current | IB | 10 | 60 | pA | VCM=0V, 25C | 8 | |
| Input bias current | IB | 600 | pA | VCM=0V, -40C to 125C | 8 | ||
| Input offset current | IOS | 10 | 60 | pA | VCM=0V, 25C | 8 | |
| Input offset current | IOS | 600 | pA | VCM=0V, -40C to 125C | 8 | ||
| Common-mode voltage range | VCM | -0.1 | -2 | V | Vs=±18V, 25C; printed as (V-)-0.1 to (V+)-2 V, offsets from the rails | 8 | |
| Common-mode rejection ratio | CMRR | 70 | 110 | dB | Vs=±2.5V, VCM=(V-)-0.1V to (V+)-2V, 25C | 8 | |
| Common-mode rejection ratio | CMRR | 70 | dB | Vs=±18V, VCM=(V-)-0.1V to (V+)-2V, 25C | 8 | ||
| Open-loop voltage gain | AOL | 92 | 115 | dB | RL=10KΩ, Vo=(V-)-0.6V to (V+)-0.6V, 25C | 8 | |
| Output voltage swing high | VOH | 17.85 | V | Vs=±18V, RL=10KΩ, 25C | 8 | ||
| Output voltage swing low | VOL | -17.85 | V | Vs=±18V, RL=10KΩ, 25C | 8 | ||
| Short-circuit current | ISC | 70 | mA | VS=36V, Vo=0V, 25C | 8 | ||
| Capacitive load drive | CLOAD | 100 | pF | 25C | 8 | ||
| Slew rate | SR | 0.67 | V/us | G=+1, CL=100pF, 25C | 8 | ||
| Gain-bandwidth product | GBW | 1.2 | MHz | 25C | 8 | ||
| Setting time, 0.01% | ts | 5 | us | VS=±2.5V, G=+1, CL=100pF, Step=2V, 25C | 8 | ||
| Overload recovery time | tOR | 5 | us | VIN·Gain≥VS, G=11, 25C | 8 | ||
| Turn-on time | tON | 10 | us | 25C | 8 | ||
| Input voltage noise | En | 16 | uVpp | f = 0.1Hz to 10Hz, Vs=±2.5V, 25C | 8 | ||
| Junction-to-ambient thermal resistance, SOT23-5 (5 pins) | RθJA | 273.8 | °C/W | 6 | |||
| Junction-to-case (top) thermal resistance, SOT23-5 (5 pins) | RθJC(top) | 126.8 | °C/W | 6 | |||
| Junction-to-board thermal resistance, SOT23-5 (5 pins) | RθJB | 85.9 | °C/W | 6 |
CAD (KiCad official)
- Symbol:
RS8411BXF - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
rs8411bxf-etched.step/rs8411bxf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rs8411bxf.step/rs8411bxf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Jiangsu RUNIC Tech datasheet (15 pp, sha256
693df6c829f35f69, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).