3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownRS809-2.93YSF3
Jiangsu RUNIC Tech · Supervisor and Reset ICs · SOT-23
RS809-2.93YSF3 from Jiangsu RUNIC Tech, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground, reference for all signals. Connect to system 0V. |
| 2 | RESET | output | Active-low, push-pull reset output. Remains low while VCC is below the 2.93V reset threshold and for at least 200ms (typ) after VCC rises above the threshold. Output high level 0.7×VCC at ISOURCE = 500µA; output low level 0.4V max at ISINK = 1.2mA. |
| 3 | VCC | power_in | Power supply voltage that is monitored. Operating range 1.0V to 5.5V; absolute maximum 6.0V. Supply current 40µA (max). This pin is both the device power rail and the monitored input. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | SOT-23 |
| Category | PMIC |
| Pins | 3 |
Ordering variants
Same part, different packaging or reel option.
RS809-2.93YSF3
CAD (KiCad official)
- Symbol:
RS809-2.93YSF3 - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files:
rs809-2-93ysf3-etched.step/rs809-2-93ysf3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rs809-2-93ysf3.step/rs809-2-93ysf3.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
rs809-2-93ysf3.step |
59 KB | You want the bare part, or you mark your own boards. |
rs809-2-93ysf3-etched.step |
2.8 MB | You want the part with RS809-2.93YSF3 already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 659 faces against 69 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Jiangsu RUNIC Tech datasheet (14 pp, sha256
a76870b564048c23, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).