3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownRS8054XP
Jiangsu RUNIC Tech · Operational Amplifier · SOP-14
RS8054XP from Jiangsu RUNIC Tech, in a SOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Output of channel A. |
| 2 | -INA | input | Inverting input of channel A. |
| 3 | +INA | input | Noninverting input of channel A. |
| 4 | V+ | power_in | Positive (highest) power supply; supply range is 1.4V to 5.5V single-supply or ±0.7V to ±2.75V dual-supply. |
| 5 | +INB | input | Noninverting input of channel B. |
| 6 | -INB | input | Inverting input of channel B. |
| 7 | OUTB | output | Output of channel B. |
| 8 | OUTC | output | Output of channel C. |
| 9 | -INC | input | Inverting input of channel C. |
| 10 | +INC | input | Noninverting input of channel C. |
| 11 | V- | power_in | Negative (lowest) power supply; the device's supply is measured as (V+) - (V-). |
| 12 | +IND | input | Noninverting input of channel D. |
| 13 | -IND | input | Inverting input of channel D. |
| 14 | OUTD | output | Output of channel D. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | SOP-14 |
| Category | Operational Amplifier/Comparator |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, VS=(V+)-(V-) (absolute maximum) | VS | 7 | V | 7 | |||
| Signal input pin current | -10 | 10 | mA | 7 | |||
| Signal output pin current | -55 | 55 | mA | 7 | |||
| Operating range, TA | TA | -40 | 125 | °C | 7 | ||
| Junction, TJ | TJ | -40 | 150 | °C | 7 | ||
| Storage, Tstg | Tstg | -65 | 150 | °C | 7 | ||
| Supply voltage, single-supply | VS | 1.4 | 5.5 | V | Single-supply | 7 | |
| Supply voltage, dual-supply | VS | 0.7 | 2.75 | V | Dual-supply | 7 | |
| Operating Voltage Range | VS | 1.4 | 5.5 | V | TJ=25°C | 8 | |
| Quiescent Current/Amplifier | IQ | 670 | 1500 | nA | TJ=25°C | 8 | |
| Input Offset Voltage | VOS | -5 | 1 | 5 | mV | VCM =VS/2; TJ=25°C | 8 |
| Input Offset Voltage Average Drift | VOS TC | -2.3 | 2.3 | uV/°C | VCM =VS/2; TJ=Full (-40°C to +125°C) | 8 | |
| Input Bias Current | IB | -10 | 1 | 10 | pA | TJ=25°C | 8 |
| Input Offset Current | IOS | -10 | 1 | 10 | pA | TJ=25°C | 8 |
| Common-Mode Voltage Range | VCM | -0.1 | 5.6 | V | VS= 5.5V; TJ=25°C | 8 | |
| Common-Mode Rejection Ratio | CMRR | 63 | 75 | dB | VS= 5.5V, VCM=-0.1V to 4V; TJ=25°C | 8 | |
| Common-Mode Rejection Ratio | CMRR | 58 | 70 | dB | VS= 5.5V, VCM=-0.1V to 5.6V; TJ=25°C | 8 | |
| Power-Supply Rejection Ratio | PSRR | 60 | 70 | dB | VS=1.4V to 5.5V, VCM=(V-)+0.5V; TJ=25°C | 8 | |
| Open-Loop Voltage Gain | AOL | 62 | 80 | dB | VS=1.4V, RL=50KΩ, VO=VS-0.1V; TJ=25°C | 8 | |
| Open-Loop Voltage Gain | AOL | 65 | 85 | dB | VS=5.0V, RL=50kΩ, VO=VS-0.1V; TJ=25°C | 8 | |
| Output Swing From Rail | 5 | mV | RL=50KΩ; TJ=25°C | 8 | |||
| Output Short-Circuit Current | IOUT | -30 | 30 | mA | TJ=25°C | 8 | |
| Thermal impedance, SOIC-14(SOP14), θJA | θJA | 104.5 | °C/W | 7 |
CAD (KiCad official)
- Symbol:
RS8054XP - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOP-14 (KiCad packages3D, STEP)
- 3D model files:
rs8054xp-etched.step/rs8054xp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rs8054xp.step/rs8054xp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Jiangsu RUNIC Tech datasheet (17 pp, sha256
1f92526dc39882e7, retrieved 2026-11-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).