component
RS8052XM
Public Made by Adomby adom
Jiangsu RUNIC Tech Operational Amplifier, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownRS8052XM
Jiangsu RUNIC Tech · Operational Amplifier · MSOP-8
RS8052XM from Jiangsu RUNIC Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Channel A amplifier output, which swings rail-to-rail with an output swing from rail of 5 mV at RL=50kΩ. |
| 2 | -IN A | input | Channel A inverting input, with a common-mode voltage range of -0.1V to 5.6V at Vs=5.5V and input terminals diode-clamped to the supply rails. |
| 3 | +IN A | input | Channel A non-inverting input, with a common-mode voltage range of -0.1V to 5.6V at Vs=5.5V and input terminals diode-clamped to the supply rails. |
| 4 | V- | power_in | Negative power supply rail, used with V+ for single or dual supply operation from 1.4V to 5.5V (V+ to V- absolute maximum 7.0V). |
| 5 | +IN B | input | Channel B non-inverting input, with a common-mode voltage range of -0.1V to 5.6V at Vs=5.5V and input terminals diode-clamped to the supply rails. |
| 6 | -IN B | input | Channel B inverting input, with a common-mode voltage range of -0.1V to 5.6V at Vs=5.5V and input terminals diode-clamped to the supply rails. |
| 7 | OUT B | output | Channel B amplifier output, which swings rail-to-rail with an output swing from rail of 5 mV at RL=50kΩ. |
| 8 | V+ | power_in | Positive power supply rail, operating from 1.4V to 5.5V with an absolute maximum V+ to V- of 7.0V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | MSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range (Vs) | Vs | 1.4 | 5.5 | V | 3 | ||
| Quiescent Current/Amplifier | IQ | 670 | 1500 | nA | 3 | ||
| Power-Supply Rejection Ratio | PSRR | 60 | 70 | dB | Vs=1.4V to 5.5V, Vcm=(V-)+0.5V | 3 | |
| Input Offset Voltage | Vos | 1 | 5 | mV | Vcm=Vs/2 | 3 | |
| Input Bias Current | IB | 1 | 10 | pA | 3 | ||
| Input Offset Current | Ios | 1 | 10 | pA | 3 | ||
| Common-Mode Voltage Range | Vcm | -0.1 | 5.6 | V | Vs= 5.5V | 3 | |
| Common-Mode Rejection Ratio | CMRR | 63 | 75 | dB | Vs= 5.5V, Vcm=-0.1V to 4V | 3 | |
| Common-Mode Rejection Ratio | CMRR | 58 | 70 | dB | Vs= 5.5V, Vcm=-0.1V to 5.6V | 3 | |
| Open-Loop Voltage Gain | AOL | 62 | 80 | dB | Vs=1.4V,RL=50KΩ,Vo=Vs-0.1V | 3 | |
| Open-Loop Voltage Gain | AOL | 65 | 85 | dB | Vs=5.0V,RL=50kΩ,Vo=Vs-0.1V | 3 | |
| Input Offset Voltage Drift | ΔVos/ΔT | 2.3 | µV/°C | Vcm=Vs/2, -40°C ≤ TA ≤125°C | 3 | ||
| Output Swing From Rail | 5 | mV | RL=50KΩ | 3 | |||
| Output Short-Circuit Current | Iout | 30 | mA | 3 | |||
| Slew Rate | SR | 30 | V/ms | 3 | |||
| Gain-Bandwidth Product | GBP | 100 | kHz | 3 | |||
| Phase Margin | PM | 60 | ° | 3 | |||
| Input Voltage Noise (peak-to-peak) | enp-p | 2.4 | μVpp | f = 0.1 Hz to 10 Hz | 3 | ||
| Input Voltage Noise Density | en | 160 | nV/√Hz | f = 1 kHz | 3 | ||
| Input Terminals, Voltage | -0.5 | V | Footnote (2); upper limit printed as (V+) + 0.5V | 2 | |||
| Input Terminals, Current | -10 | 10 | mA | Footnote (2) | 2 | ||
| Storage Temperature | -65 | 150 | °C | 2 | |||
| Operating Temperature | -40 | 125 | °C | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| Package Thermal Resistance | 150 | °C/W | @ TA = +25°C; printed for MSOP-10, SOIC-8 | 2 |
CAD (KiCad official)
- Symbol:
RS8052XM - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
rs8052xm-etched.step/rs8052xm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rs8052xm.step/rs8052xm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Jiangsu RUNIC Tech datasheet (10 pp, sha256
6d9dedaaaa62b332, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).