3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownRS8051XF
Jiangsu RUNIC Tech · Operational Amplifier · SOT-23-5
RS8051XF from Jiangsu RUNIC Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output. Rail-to-rail output stage; typical output swing to within 5 mV of rails with RL = 50 kOhm. Short-circuit current typ 30 mA. |
| 2 | V- | power_in | Negative supply / ground rail. Total supply (V+ to V-) range 1.4 V to 5.5 V (absolute max 7.0 V). |
| 3 | +IN | input | Non-inverting input. Rail-to-rail common-mode range -0.1 V to 5.6 V with Vs = 5.5 V. Input bias current 1 pA typ; diode-clamped to supplies (limit swing beyond rails to <=10 mA). |
| 4 | -IN | input | Inverting input. Rail-to-rail common-mode range -0.1 V to 5.6 V with Vs = 5.5 V. Input bias current 1 pA typ; diode-clamped to supplies. |
| 5 | V+ | power_in | Positive supply. Operating range 1.4 V to 5.5 V referenced to V-; absolute max V+ to V- = 7.0 V. Quiescent current 670 nA typ. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | SOT-23-5 |
| Category | Op-amp/Cmp |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
RS8051XFRS8051XFBXFRS8051XFXKRS8051XFXM
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Vs Operating Voltage Range | Vs | 1.4 | 5.5 | V | 3 | ||
| Quiescent Current/Amplifier | IQ | 670 | 1500 | nA | 3 | ||
| Power-Supply Rejection Ratio | PSRR | 60 | 70 | dB | Vs=1.4V to 5.5V, Vcm=(V-)+0.5V | 3 | |
| Input Offset Voltage | Vos | 1 | 5 | mV | Vcm=Vs/2 | 3 | |
| Input Offset Voltage Drift | ΔVos/ΔT | 2.3 | µV/°C | Vcm=Vs/2, -40°C ≤ TA ≤125°C | 3 | ||
| Input Bias Current | IB | 1 | 10 | pA | 3 | ||
| Input Offset Current | Ios | 1 | 10 | pA | 3 | ||
| Common-Mode Voltage Range | Vcm | -0.1 | 5.6 | V | Vs= 5.5V | 3 | |
| Common-Mode Rejection Ratio | CMRR | 63 | 75 | dB | Vs= 5.5V, Vcm=-0.1V to 4V | 3 | |
| Common-Mode Rejection Ratio | CMRR | 58 | 70 | dB | Vs= 5.5V, Vcm=-0.1V to 5.6V | 3 | |
| Open-Loop Voltage Gain | AOL | 62 | 80 | dB | Vs=1.4V,RL=50KΩ,Vo=Vs-0.1V | 3 | |
| Open-Loop Voltage Gain | AOL | 65 | 85 | dB | Vs=5.0V,RL=50kΩ,Vo=Vs-0.1V | 3 | |
| Output Swing From Rail | 5 | mV | RL=50KΩ | 3 | |||
| Output Short-Circuit Current | Iout | 30 | mA | 3 | |||
| Slew Rate | SR | 30 | V/ms | 3 | |||
| Gain-Bandwidth Product | GBP | 100 | kHz | 3 | |||
| Phase Margin | PM | 60 | ° | 3 | |||
| Input Voltage Noise (peak-to-peak) | enp-p | 2.4 | μVpp | f = 0.1 Hz to 10 Hz | 3 | ||
| Input Voltage Noise Density | en | 160 | nV/√Hz | f = 1 kHz | 3 | ||
| Input Terminals, Voltage | -0.5 | V | Printed as -0.5 to (V+)+0.5V; upper limit is supply-relative, not a number | 2 | |||
| Input Terminals, Current | -10 | 10 | mA | Input terminals, see note (2) | 2 | ||
| Storage Temperature | -65 | 150 | °C | 2 | |||
| Operating Temperature | -40 | 125 | °C | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| Package Thermal Resistance (SOT23-5) | 200 | °C/W | @ TA = +25°C | 2 |
CAD (KiCad official)
- Symbol:
RS8051XF - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
rs8051xf-etched.step/rs8051xf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rs8051xf.step/rs8051xf.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
rs8051xf.step |
85 KB | You want the bare part, or you mark your own boards. |
rs8051xf-etched.step |
1.8 MB | You want the part with RS8051XF already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 442 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Jiangsu RUNIC Tech datasheet (10 pp, sha256
6d9dedaaaa62b332, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).