component
RS803-3.08YSF3
Public Made by Adomby adom
Jiangsu RUNIC Tech Supervisor And Reset ICs, SOT23. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 24d ago |
| viewers | 24d ago |
| package.json | 24d ago |
| page.json | 24d ago |
| README.md | 24d ago |
| rs803-3-08ysf3-etched.glb | 24d ago |
| rs803-3-08ysf3-etched.step | 24d ago |
| rs803-3-08ysf3-hero.glb | 24d ago |
| rs803-3-08ysf3-hero.overlay.json | 24d ago |
| rs803-3-08ysf3.glb | 24d ago |
| rs803-3-08ysf3.kicad_mod | 24d ago |
| rs803-3-08ysf3.kicad_sym | 24d ago |
| rs803-3-08ysf3.lbr | 24d ago |
| rs803-3-08ysf3.step | 24d ago |
RS803-3.08YSF3
Jiangsu RUNIC Tech · Supervisor And Reset ICs · SOT23
RS803-3.08YSF3 from Jiangsu RUNIC Tech, in a SOT23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground, the reference for all signals. |
| 2 | RESET | output | Active-low open-drain reset output that remains low while VCC is below the reset threshold and for at least 200ms after VCC rises above the reset threshold; it requires an external pull-up resistor that may connect to any supply from 0V to 6V. |
| 3 | VCC | power_in | Power supply voltage that is monitored; the device operating voltage range is 1.2V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | SOT23 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | VCC | 1.2 | 5.5 | V | 7 | ||
| Supply Current | ISUPPLY | 20 | 50 | µA | 7 | ||
| Reset Threshold | VRT | 2.94 | 3.08 | 3.21 | V | RS803-3.08 (VCC = 3.21V to 5.5V for this variant) | 7 |
| Reset Pulse Width | tRS | 100 | 200 | 460 | ms | 7 | |
| RESET Output voltage Low | 0.4 | V | IOL = 1.2mA | 7 | |||
| RESET Open-Drain output Leakage Current | Ilkg(OD) | 1 | µA | VCC > VRT, RESET deasserted | 7 | ||
| VCC supply voltage range | VCC | -0.5 | 6 | V | 6 | ||
| Input voltage range | VI | -0.5 | 6 | V | 6 | ||
| Voltage range applied to any output in the high-impedance or power-off state | Vo | -0.5 | 6 | V | 6 | ||
| Voltage range applied to any output in the high or low state | Vo | -0.5 | V | Printed maximum is VCC+0.5 V (not a numeric value) | 6 | ||
| Input clamp current | IIK | -20 | mA | VI<0 | 6 | ||
| Output clamp current | IOK | -20 | mA | VO<0 | 6 | ||
| Continuous output current | IO | -20 | 20 | mA | 6 | ||
| Continuous current through VCC or GND | -20 | 20 | mA | 6 | |||
| Junction temperature | TJ | -65 | 150 | °C | 6 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 6 | ||
| Operating temperature | TA | -40 | 125 | °C | 6 | ||
| Reset Threshold Hysteresis | 15 | mV | RS803-3.08 | 7 | |||
| Reset Threshold Temperature Coefficient | 30 | ppm/°C | 7 | ||||
| Package thermal impedance (SOT23) | θJA | 295 | °C/W | Calculated per JESD-51; packages soldered directly onto a PCB | 6 |
CAD (KiCad official)
- Symbol:
RS803-3.08YSF3 - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT23 (KiCad packages3D, STEP)
- 3D model files:
rs803-3-08ysf3-etched.step/rs803-3-08ysf3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rs803-3-08ysf3.step/rs803-3-08ysf3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Jiangsu RUNIC Tech datasheet (13 pp, sha256
5084382dfa1ca18f, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).