← Commit history
page.json+10−7@@ -32,13 +32,13 @@ "number": "1", "name": "MR", "type": "input",- "description": "Active-low Manual-Reset input. Triggers a reset pulse when pulled below 0.8 V (VIL at VCC=5 V). Has an internal 20-120 k\u03a9 (52 k\u03a9 typ) pull-up resistor and can be driven by a TTL/CMOS logic line or a pushbutton switch to GND. MR pulse width min 150 ns; MR-to-RESET delay 23 ns typ."+ "description": "Active-low Manual-Reset input. Triggers a reset pulse when pulled below 0.8 V (VIL at VCC=5 V). Has an internal 20-120 kΩ (52 kΩ typ) pull-up resistor and can be driven by a TTL/CMOS logic line or a pushbutton switch to GND. MR pulse width min 150 ns; MR-to-RESET delay 23 ns typ." }, { "number": "2", "name": "VCC", "type": "power_in",- "description": "Power supply voltage that is monitored. Operating range 1.0 V to 5.5 V; the reset comparator asserts RESET whenever VCC falls below the 2.93 V (2.86-3.00 V) reset threshold. Supply current 20 \u00b5A typ, 40 \u00b5A max."+ "description": "Power supply voltage that is monitored. Operating range 1.0 V to 5.5 V; the reset comparator asserts RESET whenever VCC falls below the 2.93 V (2.86-3.00 V) reset threshold. Supply current 20 µA typ, 40 µA max." }, { "number": "3",@@ -50,13 +50,13 @@ "number": "4", "name": "PFI", "type": "input",- "description": "Power-Fail Voltage Monitor comparator input. Compared against an internal 1.20 V reference (1.14-1.26 V); when PFI < 1.2 V, PFO is driven low. Input current \u00b110 nA typ. Tie PFI to GND or VCC if the power-fail comparator is not used."+ "description": "Power-Fail Voltage Monitor comparator input. Compared against an internal 1.20 V reference (1.14-1.26 V); when PFI < 1.2 V, PFO is driven low. Input current ±10 nA typ. Tie PFI to GND or VCC if the power-fail comparator is not used." }, { "number": "5", "name": "PFO", "type": "output",- "description": "Active-low Power-Fail comparator output. Goes low and sinks current when PFI < 1.2 V; otherwise stays high. Push-pull output: VOH \u2265 0.7\u00b7VCC at 800 \u00b5A source, VOL \u2264 0.4 V at 1.2 mA sink."+ "description": "Active-low Power-Fail comparator output. Goes low and sinks current when PFI < 1.2 V; otherwise stays high. Push-pull output: VOH ≥ 0.7·VCC at 800 µA source, VOL ≤ 0.4 V at 1.2 mA sink." }, { "number": "6",@@ -68,13 +68,13 @@ "number": "7", "name": "RESET", "type": "output",- "description": "Active-low reset output. Pulses low for 160 ms (100-350 ms) when triggered and stays low whenever VCC is below the 2.93 V reset threshold. Remains low for 160 ms after VCC rises above the threshold or after MR goes from low to high. A watchdog timeout will not trigger RESET unless WDO is tied to MR. Push-pull: VOH \u2265 0.7\u00b7VCC at 500 \u00b5A source, VOL \u2264 0.4 V at 1.2 mA sink. Guaranteed valid down to VCC = 1.0 V."+ "description": "Active-low reset output. Pulses low for 160 ms (100-350 ms) when triggered and stays low whenever VCC is below the 2.93 V reset threshold. Remains low for 160 ms after VCC rises above the threshold or after MR goes from low to high. A watchdog timeout will not trigger RESET unless WDO is tied to MR. Push-pull: VOH ≥ 0.7·VCC at 500 µA source, VOL ≤ 0.4 V at 1.2 mA sink. Guaranteed valid down to VCC = 1.0 V." }, { "number": "8", "name": "WDO", "type": "output",- "description": "Active-low Watchdog Output. Pulls low when the internal 1.6 s watchdog timer times out and stays low until the watchdog is cleared. WDO also goes low whenever VCC is below the reset threshold (no minimum pulse width) and returns high with no delay once VCC recovers. Push-pull: VOH \u2265 0.7\u00b7VCC at 800 \u00b5A source, VOL \u2264 0.4 V at 1.2 mA sink."+ "description": "Active-low Watchdog Output. Pulls low when the internal 1.6 s watchdog timer times out and stays low until the watchdog is cleared. WDO also goes low whenever VCC is below the reset threshold (no minimum pulse width) and returns high with no delay once VCC recovers. Push-pull: VOH ≥ 0.7·VCC at 800 µA source, VOL ≤ 0.4 V at 1.2 mA sink." } ], "provenance": {@@ -138,5 +138,8 @@ "docs/rs706-2-93yk-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }