Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

RS6334XTQC16

Jiangsu RUNIC Tech · Operational Amplifier · TQFN-16L(3x3)

RS6334XTQC16 from Jiangsu RUNIC Tech, in a TQFN-16L(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 +IN A input Non-inverting input of op-amp A. Rail-to-rail input range from V- - 0.1V to V+ + 0.1V (Vcm = -0.1V to 5.6V with Vs = 5.5V). Input bias current typically 1 pA.
2 V+ power_in Positive supply rail. Operating range 2.5V to 5.5V (single-supply) or +/-1.25V to +/-2.75V (dual-supply). Absolute max V+ to V- = 7.0V. Bypass with 0.1uF close to the pin.
3 +IN B input Non-inverting input of op-amp B. Rail-to-rail input range identical to channel A.
4 -IN B input Inverting input of op-amp B. Rail-to-rail input.
5 OUT B output Output of op-amp B. Rail-to-rail output; swing typically within 25mV of the rails with RL = 2kOhm. Short-circuit current 55mA typ.
6 NC unconnected No internal connection. Leave floating or tie to ground for best PCB thermal/EMI behavior.
7 NC unconnected No internal connection.
8 OUT C output Output of op-amp C. Rail-to-rail output.
9 -IN C input Inverting input of op-amp C. Rail-to-rail input.
10 V- power_in Negative supply rail (or ground in single-supply operation). Absolute max V+ to V- = 7.0V.
11 -IN D input Inverting input of op-amp D. Rail-to-rail input.
12 +IN D input Non-inverting input of op-amp D. Rail-to-rail input.
13 OUT D output Output of op-amp D. Rail-to-rail output.
14 +IN C input Non-inverting input of op-amp C. Rail-to-rail input. Placement on the top edge (rather than adjacent to -IN C) is unusual - please verify against the RS6334 TQFN3x3-16L pinout diagram.
15 OUT A output Output of op-amp A. Rail-to-rail output.
16 -IN A input Inverting input of op-amp A. Rail-to-rail input.

Key specifications

Parameter Value
Manufacturer Jiangsu RUNIC Tech
Package TQFN-16L(3x3)
Category Op-amp/Cmp
Pins 16

Ordering variants

Same part, different packaging or reel option.

  • RS6334XTQC16
  • RS6334XTQC16XP
  • RS6334XTQC16XQ

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Voltage Range Vs 2.5 5.5 V 3
Common-Mode Voltage Range Vcm -0.1 5.6 V Vs= 5.5V 3
Input Offset Voltage Vos 0.6 3 mV 25C 3
Input Bias Current IB 1 10 pA 25C 3
Input Offset Current Ios 1 10 pA 25C 3
Quiescent Current/Amplifier IQ 58 80 uA 25C 3
Power-Supply Rejection Ratio PSRR 72 90 dB Vs=2.5V to 5.5V, Vcm=(V-)+0.5V, 25C 3
Power-Supply Rejection Ratio PSRR 65 dB Vs=2.5V to 5.5V, Vcm=(V-)+0.5V, -40C to 125C 3
Common-Mode Rejection Ratio CMRR 71 90 dB Vs= 5.5V, Vcm=-0.1V to 4V, 25C 3
Common-Mode Rejection Ratio CMRR 68 dB Vs= 5.5V, Vcm=-0.1V to 4V, -40C to 125C 3
Common-Mode Rejection Ratio CMRR 60 80 dB Vs= 5.5V, Vcm=-0.1V to 5.6V, 25C 3
Common-Mode Rejection Ratio CMRR 57 dB Vs= 5.5V, Vcm=-0.1V to 5.6V, -40C to 125C 3
Open-Loop Voltage Gain AOL 94 105 dB RL=2KΩ, Vo=0.15V to 4.85V, 25C 3
Open-Loop Voltage Gain AOL 85 dB RL=2KΩ, Vo=0.15V to 4.85V, -40C to 125C 3
Open-Loop Voltage Gain AOL 100 110 dB RL=10KΩ, Vo=0.05V to 4.95V, 25C 3
Open-Loop Voltage Gain AOL 90 dB RL=10KΩ, Vo=0.05V to 4.95V, -40C to 125C 3
Output Swing From Rail 25 mV 25C, RL=2KΩ 3
Output Swing From Rail 8 mV 25C, RL=10KΩ 3
Output Short-Circuit Current Iout 55 mA 25C 3
Slew Rate SR 0.5 V/us 25C 3
Gain-Bandwidth Product GBP 1.1 MHz 25C 3
Phase Margin PM 64 ° 25C 3
Setting Time, 0.1% ts 1.3 us 3
Overload Recovery Time 2.3 us VIN·Gain≥VS 3
Input Voltage Noise Density en 22 nV/√Hz f = 1KHz, 25C 3
Input Voltage Noise Density en 20 nV/√Hz f = 10KHz, 25C 3
Input Offset Voltage Average Drift Vos TC 2 uV/C -40C to 125C 3
Input Terminals Voltage -0.5 V Upper limit printed as (V+) + 0.5V 2
Input Terminals Current -10 10 mA 2
Storage Temperature -65 150 °C 2
Operating Temperature -40 125 °C 2
Junction Temperature 150 °C 2

CAD (KiCad official)

  • Symbol: RS6334XTQC16
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: TQFN-16L(3x3) (KiCad packages3D, STEP)
  • 3D model files: rs6334xtqc16-etched.step / rs6334xtqc16-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rs6334xtqc16.step / rs6334xtqc16.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
rs6334xtqc16.step 190 KB You want the bare part, or you mark your own boards.
rs6334xtqc16-etched.step 2.6 MB You want the part with RS6334XTQC16 already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 637 faces against 110 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Jiangsu RUNIC Tech datasheet (18 pp, sha256 631d1d87ce16e5f5, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF