3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownRS6331KXF
Jiangsu RUNIC Tech · Operational Amplifier · SOT-23-5
RS6331KXF from Jiangsu RUNIC Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output. Rail-to-rail; typical output current source ~110mA, short-circuit protected (continuous short-to-ground per absolute-max notes; limit current to 140mA). |
| 2 | V- | power_in | Negative (lowest) power supply rail. In single-supply operation tie to GND; supports dual-supply operation down to -2.75V. Vs = (V+)-(V-) must be 2.1V to 5.5V (7V absolute max). |
| 3 | +IN | input | Non-inverting (positive) amplifier input. Rail-to-rail input; common-mode range extends from (V-)-0.2V to (V+)+0.2V at Vs=5.5V. Input bias current ~1pA typ, 10pA max at 25degC. Diode-clamped to supply rails; limit input current to +/-10mA. |
| 4 | -IN | input | Inverting (negative) amplifier input. Rail-to-rail input; common-mode range extends from (V-)-0.2V to (V+)+0.2V at Vs=5.5V. Diode-clamped to supply rails; limit input current to +/-10mA. |
| 5 | V+ | power_in | Positive (highest) power supply rail. Operating range 2.1V to 5.5V single-supply (or up to +2.75V dual-supply). 7V absolute maximum across V+ to V-. Quiescent current ~85uA typ, 145uA max. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | SOT-23-5 |
| Category | Op-amp/Cmp |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
RS6331KXF
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage Vs=(V+)-(V-) (absolute maximum) | Vs | 7 | V | 3 | |||
| Signal input pin current | -10 | 10 | mA | 3 | |||
| Signal output pin current | -140 | 140 | mA | 3 | |||
| Operating range, TA | TA | -40 | 125 | °C | 3 | ||
| Junction temperature | TJ | 150 | °C | 3 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| Electrostatic discharge, Human-body model (HBM) | V(ESD) | -3000 | 3000 | V | Human-body model (HBM) | 3 | |
| Electrostatic discharge, Machine Model (MM) | V(ESD) | -200 | 200 | V | Machine Model (MM) | 3 | |
| Supply voltage, signal-supply | Vs | 2.1 | 5.5 | V | Vs=(V+)-(V-) | 3 | |
| Supply voltage, dual-supply (printed ±1.05 to ±2.75) | Vs | 1.05 | 2.75 | V | Dual supply, printed as ±1.05 (min) and ±2.75 (max) | 3 | |
| Vs Operating Voltage Range | Vs | 2.1 | 5.5 | V | TJ=25C | 5 | |
| Power-Supply Rejection Ratio | PSRR | 75 | 92 | dB | Vs=2.1V to 5.5V, Vcm=(V-)+0.5V; TJ=25C | 5 | |
| Power-Supply Rejection Ratio | PSRR | 65 | dB | Vs=2.1V to 5.5V, Vcm=(V-)+0.5V; TJ=-40C to 125C | 5 | ||
| Input Offset Voltage | Vos | -3 | 0.5 | 3 | mV | TJ=25C | 5 |
| Input Offset Voltage Average Drift | Vos Tc | 2 | uV/C | TJ=-40C to 125C | 5 | ||
| Input Bias Current | IB | 1 | 10 | pA | TJ=25C | 5 | |
| Input Offset Current | Ios | 1 | 10 | pA | TJ=25C | 5 | |
| Common-Mode Voltage Range | Vcm | -0.2 | 5.7 | V | Vs=5.5V; TJ=25C | 5 | |
| Common-Mode Rejection Ratio | CMRR | 75 | 95 | dB | Vs=5.5V, Vcm=-0.2V to 4V; TJ=25C | 5 | |
| Common-Mode Rejection Ratio | CMRR | 68 | dB | Vs=5.5V, Vcm=-0.2V to 4V; TJ=-40C to 125C | 5 | ||
| Common-Mode Rejection Ratio | CMRR | 63 | 85 | dB | Vs=5.5V, Vcm=-0.2V to 5.7V; TJ=25C | 5 | |
| Common-Mode Rejection Ratio | CMRR | 57 | dB | Vs=5.5V, Vcm=-0.2V to 5.7V; TJ=-40C to 125C | 5 | ||
| Open-Loop Voltage Gain | AOL | 95 | 110 | dB | RL=2KΩ, Vo=0.15V to 4.85V; TJ=25C | 5 | |
| Open-Loop Voltage Gain | AOL | 85 | dB | RL=2KΩ, Vo=0.15V to 4.85V; TJ=-40C to 125C | 5 | ||
| Open-Loop Voltage Gain | AOL | 100 | 120 | dB | RL=10KΩ, Vo=0.05V to 4.95V; TJ=25C | 5 | |
| Open-Loop Voltage Gain | AOL | 92 | dB | RL=10KΩ, Vo=0.05V to 4.95V; TJ=-40C to 125C | 5 | ||
| Output Swing From Rail | 25 | mV | RL=2KΩ; TJ=25C | 5 | |||
| Output Swing From Rail | 8 | mV | RL=10KΩ; TJ=25C | 5 | |||
| Output Current Source | Iout | 110 | mA | TJ=25C | 5 | ||
| Slew Rate | SR | 0.5 | V/us | CL=100pF, G=1; TJ=25C | 5 | ||
| Gain-Bandwidth Product | GBP | 1.1 | MHz | TJ=25C | 5 | ||
| Phase Margin | PM | 64 | ° | TJ=25C | 5 | ||
| Setting Time, 0.1% | ts | 6.5 | us | CL=100pF, Vs=5V, 2-V step, G=1 | 5 | ||
| Overload Recovery Time | 4 | us | VIN·Gain≥VS | 5 | |||
| Input Voltage Noise Density | en | 22 | nV/√Hz | f = 1KHz; TJ=25C | 5 | ||
| Input Voltage Noise Density | en | 20 | nV/√Hz | f = 10KHz; TJ=25C | 5 | ||
| Junction-to-ambient thermal resistance | RθJA | 273.8 | °C/W | 3 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 126.8 | °C/W | 3 | |||
| Junction-to-board thermal resistance | RθJB | 85.9 | °C/W | 3 | |||
| Junction-to-top characterization parameter | ΨJT | 10.9 | °C/W | 3 | |||
| Junction-to-board characterization parameter | ΨJB | 84.9 | °C/W | 3 |
CAD (KiCad official)
- Symbol:
RS6331KXF - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
rs6331kxf-etched.step/rs6331kxf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rs6331kxf.step/rs6331kxf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Jiangsu RUNIC Tech datasheet (14 pp, sha256
8f7d0e78bb6869b5, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).