Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

RS624XP

Jiangsu RUNIC Tech · Low Noise Amplifiers (LNA) - RF · SOIC-14

RS624XP from Jiangsu RUNIC Tech, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTA output Output of channel A; the absolute maximum signal output current is ±70 mA, and a short circuit to ground is continuous for one amplifier per package.
2 -INA input Inverting input of channel A; signal input pins are diode-clamped to the supply rails and should be current-limited to 10 mA if they can swing more than 0.5 V beyond them.
3 +INA input Non-inverting input of channel A; signal input pins are diode-clamped to the supply rails and should be current-limited to 10 mA if they can swing more than 0.5 V beyond them.
4 V+ power_in Positive (highest) power supply; the recommended supply range is 2.5 V to 5.5 V single-supply (absolute maximum 7 V).
5 +INB input Non-inverting input of channel B; signal input pins are diode-clamped to the supply rails and should be current-limited to 10 mA if they can swing more than 0.5 V beyond them.
6 -INB input Inverting input of channel B; signal input pins are diode-clamped to the supply rails and should be current-limited to 10 mA if they can swing more than 0.5 V beyond them.
7 OUTB output Output of channel B; the absolute maximum signal output current is ±70 mA, and a short circuit to ground is continuous for one amplifier per package.
8 OUTC output Output of channel C; the absolute maximum signal output current is ±70 mA, and a short circuit to ground is continuous for one amplifier per package.
9 -INC input Inverting input of channel C; signal input pins are diode-clamped to the supply rails and should be current-limited to 10 mA if they can swing more than 0.5 V beyond them.
10 +INC input Non-inverting input of channel C; signal input pins are diode-clamped to the supply rails and should be current-limited to 10 mA if they can swing more than 0.5 V beyond them.
11 V- power_in Negative (lowest) power supply, which is the ground reference for single-supply operation between 2.5 V and 5.5 V.
12 +IND input Non-inverting input of channel D; signal input pins are diode-clamped to the supply rails and should be current-limited to 10 mA if they can swing more than 0.5 V beyond them.
13 -IND input Inverting input of channel D; signal input pins are diode-clamped to the supply rails and should be current-limited to 10 mA if they can swing more than 0.5 V beyond them.
14 OUTD output Output of channel D; the absolute maximum signal output current is ±70 mA, and a short circuit to ground is continuous for one amplifier per package.

Key specifications

Parameter Value
Manufacturer Jiangsu RUNIC Tech
Package SOIC-14
Category RF And Wireless
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating voltage range (Vs = (V+) - (V-)) Vs 2.5 5.5 V 25C 9
Quiescent current per amplifier IQ 600 800 uA 25C 9
Power-supply rejection ratio PSRR 78 93 dB Vs=2.5V to 5.5V, Vcm=(V-)+0.5V, 25C 9
Power-supply rejection ratio PSRR 72 dB Vs=2.5V to 5.5V, Vcm=(V-)+0.5V, -40C to 125C 9
Input offset voltage Vos -3 0.7 3 mV 25C 9
Input bias current IB -10 1 10 pA 25C 9
Input offset current Ios -10 1 10 pA 25C 9
Common-mode voltage range Vcm -0.1 5.6 V Vs= 5.5V, 25C 9
Common-mode rejection ratio CMRR 74 92 dB Vs= 5.5V, Vcm=-0.1V to 4V, 25C 9
Common-mode rejection ratio CMRR 68 dB Vs= 5.5V, Vcm=-0.1V to 4V, -40C to 125C 9
Common-mode rejection ratio CMRR 62 83 dB Vs= 5.5V, Vcm=-0.1V to 5.6V, 25C 9
Common-mode rejection ratio CMRR 60 dB Vs= 5.5V, Vcm=-0.1V to 5.6V, -40C to 125C 9
Open-loop voltage gain AOL 96 102 dB RL=2KΩ, Vo=0.15V to 4.85V, 25C 9
Open-loop voltage gain AOL 83 dB RL=2KΩ, Vo=0.15V to 4.85V, -40C to 125C 9
Open-loop voltage gain AOL 98 106 dB RL=10KΩ, Vo=0.05V to 4.95V, 25C 9
Open-loop voltage gain AOL 85 dB RL=10KΩ, Vo=0.05V to 4.95V, -40C to 125C 9
Output swing from rail 40 mV RL=2KΩ, 25C 9
Output swing from rail 7 mV RL=10KΩ, 25C 9
Supply voltage, absolute maximum (Vs = (V+) - (V-)) Vs 7 V 6
Signal input pin current -10 10 mA 6
Signal output pin current -70 70 mA 6
Operating range, free-air temperature TA -40 125 °C 6
Junction temperature TJ 150 °C 6
Storage temperature Tstg -65 150 °C 6
Single-supply voltage (Vs = (V+) - (V-)) Vs 2.5 5.5 V Single-supply 6
Dual-supply voltage (printed ±1.25 V to ±2.75 V) Vs 1.25 2.75 V Dual-supply, printed as ±1.25 to ±2.75 6
Junction-to-ambient thermal resistance (SOIC-14) RθJA 83.8 °C/W 7
Junction-to-case (top) thermal resistance (SOIC-14) RθJC(top) 70.7 °C/W 7
Junction-to-board thermal resistance (SOIC-14) RθJB 59.5 °C/W 7
Junction-to-top characterization parameter (SOIC-14) ΨJT 11.6 °C/W 7
Junction-to-board characterization parameter (SOIC-14) ΨJB 37.7 °C/W 7

CAD (KiCad official)

  • Symbol: RS624XP
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOIC-14 (KiCad packages3D, STEP)
  • 3D model files: rs624xp-etched.step / rs624xp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rs624xp.step / rs624xp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Jiangsu RUNIC Tech datasheet (27 pp, sha256 629551fe8d903c10, retrieved 2026-11-09, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF