main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs rs622xm: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers rs622xm: viewers · Ray
package.json Publish 0.2.1 · Ray
page.json Publish 0.2.1 · Ray
README.md rs622xm: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray
rs622xm-etched.fit.json rs622xm: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
rs622xm-etched.glb rs622xm: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wit… · Ray
rs622xm-etched.step rs622xm: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wit… · Ray
rs622xm-hero.glb rs622xm: hero from the plain model · Ray
rs622xm-hero.overlay.json rs622xm: hero from the plain model · Ray
rs622xm.glb Publish 0.1.0 · Ray
rs622xm.kicad_mod Publish 0.1.0 · Ray
rs622xm.kicad_sym Publish 0.1.0 · Ray
rs622xm.lbr Publish 0.1.0 · Ray
rs622xm.step Publish 0.1.0 · Ray

RS622XM

Jiangsu RUNIC Tech · Operational Amplifier · MSOP-8

RS622XM from Jiangsu RUNIC Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTA output Amplifier A output. Rail-to-rail CMOS output; typical output short-circuit current 50 mA, output swing to within ~7 mV of the rails at RL = 10 kΩ.
2 -INA input Amplifier A inverting input. Rail-to-rail input, common-mode range -0.1 V to (V+)+0.1 V (spec'd to +5.6 V at Vs = 5.5 V). Input bias current ~1 pA typical.
3 +INA input Amplifier A non-inverting input. Rail-to-rail input, common-mode range -0.1 V to (V+)+0.1 V. Input bias current ~1 pA typical.
4 V- power_in Negative supply / ground. For single-supply operation tie to GND; supply span V+ to V- must be 2.5 V to 5.5 V (7.0 V absolute max).
5 +INB input Amplifier B non-inverting input. Rail-to-rail input, common-mode range -0.1 V to (V+)+0.1 V. Input bias current ~1 pA typical.
6 -INB input Amplifier B inverting input. Rail-to-rail input, common-mode range -0.1 V to (V+)+0.1 V. Input bias current ~1 pA typical.
7 OUTB output Amplifier B output. Rail-to-rail CMOS output; typical output short-circuit current 50 mA, output swing to within ~7 mV of the rails at RL = 10 kΩ.
8 V+ power_in Positive supply. 2.5 V to 5.5 V referenced to V- (7.0 V absolute max V+ to V-). Bypass with a 0.1 uF (and optional 10 uF) capacitor close to the pin.

Key specifications

Parameter Value
Manufacturer Jiangsu RUNIC Tech
Package MSOP-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • RS622XM
  • RS622XK
  • RS622XQ
  • RS622XTDE8
  • RS622XTDC8

CAD (KiCad official)

  • Symbol: RS622XM
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: rs622xm-etched.step / rs622xm-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rs622xm.step / rs622xm.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
rs622xm.step 123 KB You want the bare part, or you mark your own boards.
rs622xm-etched.step 1.8 MB You want the part with RS622XM already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 440 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Jiangsu RUNIC Tech datasheet (18 pp, sha256 5cc06cc083590cda, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF