component
RS621PXF
Public Made by Adomby adom
Jiangsu RUNIC Tech Operational Amplifier, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
main
Ray
rs621pxf: specified limits as data (metadata.characteristics, 22 rows from the datasheet)
1d44516
20d ago
RS621PXF
Jiangsu RUNIC Tech · Operational Amplifier · SOT-23-5
RS621PXF from Jiangsu RUNIC Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output. Rail-to-rail output swing (within ~40 mV of rails with RL=2 kΩ, ~7 mV with RL=10 kΩ). Short-circuit current typically 50 mA. |
| 2 | V- | power_in | Negative supply rail. Tie to GND for single-supply operation or to the negative rail for dual-supply operation. Total supply (V+ to V-) must be 2.5 V to 5.5 V (7.0 V absolute max). |
| 3 | +IN | input | Non-inverting input. Rail-to-rail common-mode range from -0.1 V to +5.6 V with Vs=5.5 V. Input bias current typically 1 pA (10 pA max at 25°C). |
| 4 | -IN | input | Inverting input. Rail-to-rail common-mode range from -0.1 V to +5.6 V with Vs=5.5 V. Input bias current typically 1 pA (10 pA max at 25°C). Input terminals are diode-clamped to the supplies; limit fault current to ≤10 mA. |
| 5 | V+ | power_in | Positive supply rail. Operating range 2.5 V to 5.5 V referenced to V- (7.0 V absolute max). Decouple with a 0.1 uF capacitor placed close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | SOT-23-5 |
| Category | Op-amp/Cmp |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
RS621PXFRS621BPXFRS621PXKRS621PXMRS622PXKRS622PXMRS622PXTRS622PXQRS624PXPRS624PXQ
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range (Vs) | Vs | 2.5 | 5.5 | V | 25°C | 3 | |
| Quiescent Current per Amplifier | IQ | 600 | 800 | uA | 25°C | 3 | |
| Input Offset Voltage | Vos | -0.5 | 0.1 | 0.5 | mV | Vcm=Vs/2, 25°C | 3 |
| Input Offset Voltage Drift | Vos TC | 2 | uV/°C | -40°C to 125°C | 3 | ||
| Input Bias Current | IB | 1 | 10 | pA | 25°C | 3 | |
| Input Offset Current | Ios | 1 | 10 | pA | 25°C | 3 | |
| Common-Mode Voltage Range | Vcm | -0.1 | 5.6 | V | Vs=5.5V, 25°C | 3 | |
| Supply Voltage, V+ to V- | 7 | V | 2 | ||||
| Input Terminals Voltage | -0.5 | V | Referenced to (V+)+0.5V upper limit, footnote (2) | 2 | |||
| Input Terminals Current | -10 | 10 | mA | 2 | |||
| Storage Temperature | -65 | 150 | °C | 2 | |||
| Operating Temperature | -40 | 125 | °C | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| Output Short-Circuit Current | Iout | 50 | mA | 25°C | 3 | ||
| Slew Rate | SR | 3.7 | V/us | 25°C | 3 | ||
| Gain-Bandwidth Product | GBP | 7 | MHz | 25°C | 3 | ||
| Phase Margin | Φm | 64 | ° | 25°C | 3 | ||
| Settling Time | ts | 0.5 | us | 0.1% | 3 | ||
| Overload Recovery Time | 0.5 | us | VIN • Gain ≥ Vs | 3 | |||
| Input-Referred Voltage Noise at 1 kHz | en | 11 | nV/√Hz | f = 1 kHz, 25°C | 3 | ||
| Input-Referred Voltage Noise at 10 kHz | en | 7.5 | nV/√Hz | f = 10 kHz, 25°C | 3 | ||
| Package Thermal Resistance SOT23-5 | 200 | °C/W | @ TA = +25°C | 2 |
CAD (KiCad official)
- Symbol:
RS621PXF - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
rs621pxf-etched.step/rs621pxf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rs621pxf.step/rs621pxf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Jiangsu RUNIC Tech datasheet (14 pp, sha256
cad15b6d4c5f5e33, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# RS621PXF
**Jiangsu RUNIC Tech** · Operational Amplifier · SOT-23-5
RS621PXF from Jiangsu RUNIC Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output. Rail-to-rail output swing (within ~40 mV of rails with RL=2 kΩ, ~7 mV with RL=10 kΩ). Short-circuit current typically 50 mA. |
| 2 | V- | power_in | Negative supply rail. Tie to GND for single-supply operation or to the negative rail for dual-supply operation. Total supply (V+ to V-) must be 2.5 V to 5.5 V (7.0 V absolute max). |
| 3 | +IN | input | Non-inverting input. Rail-to-rail common-mode range from -0.1 V to +5.6 V with Vs=5.5 V. Input bias current typically 1 pA (10 pA max at 25°C). |
| 4 | -IN | input | Inverting input. Rail-to-rail common-mode range from -0.1 V to +5.6 V with Vs=5.5 V. Input bias current typically 1 pA (10 pA max at 25°C). Input terminals are diode-clamped to the supplies; limit fault current to ≤10 mA. |
| 5 | V+ | power_in | Positive supply rail. Operating range 2.5 V to 5.5 V referenced to V- (7.0 V absolute max). Decouple with a 0.1 uF capacitor placed close to the pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | SOT-23-5 |
| Category | Op-amp/Cmp |
| Pins | 5 |
## Ordering variants
Same part, different packaging or reel option.
- `RS621PXF`
- `RS621BPXF`
- `RS621PXK`
- `RS621PXM`
- `RS622PXK`
- `RS622PXM`
- `RS622PXT`
- `RS622PXQ`
- `RS624PXP`
- `RS624PXQ`
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range (Vs) | Vs | 2.5 | | 5.5 | V | 25°C | 3 |
| Quiescent Current per Amplifier | IQ | | 600 | 800 | uA | 25°C | 3 |
| Input Offset Voltage | Vos | -0.5 | 0.1 | 0.5 | mV | Vcm=Vs/2, 25°C | 3 |
| Input Offset Voltage Drift | Vos TC | | | 2 | uV/°C | -40°C to 125°C | 3 |
| Input Bias Current | IB | | 1 | 10 | pA | 25°C | 3 |
| Input Offset Current | Ios | | 1 | 10 | pA | 25°C | 3 |
| Common-Mode Voltage Range | Vcm | -0.1 | | 5.6 | V | Vs=5.5V, 25°C | 3 |
| Supply Voltage, V+ to V- | | | | 7 | V | | 2 |
| Input Terminals Voltage | | -0.5 | | | V | Referenced to (V+)+0.5V upper limit, footnote (2) | 2 |
| Input Terminals Current | | -10 | | 10 | mA | | 2 |
| Storage Temperature | | -65 | | 150 | °C | | 2 |
| Operating Temperature | | -40 | | 125 | °C | | 2 |
| Junction Temperature | | | | 150 | °C | | 2 |
| Output Short-Circuit Current | Iout | | 50 | | mA | 25°C | 3 |
| Slew Rate | SR | | 3.7 | | V/us | 25°C | 3 |
| Gain-Bandwidth Product | GBP | | 7 | | MHz | 25°C | 3 |
| Phase Margin | Φm | | 64 | | ° | 25°C | 3 |
| Settling Time | ts | | 0.5 | | us | 0.1% | 3 |
| Overload Recovery Time | | | 0.5 | | us | VIN • Gain ≥ Vs | 3 |
| Input-Referred Voltage Noise at 1 kHz | en | | 11 | | nV/√Hz | f = 1 kHz, 25°C | 3 |
| Input-Referred Voltage Noise at 10 kHz | en | | 7.5 | | nV/√Hz | f = 10 kHz, 25°C | 3 |
| Package Thermal Resistance SOT23-5 | | | 200 | | °C/W | @ TA = +25°C | 2 |
## CAD (KiCad official)
- Symbol: `RS621PXF`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `rs621pxf-etched.step` / `rs621pxf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `rs621pxf.step` / `rs621pxf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Jiangsu RUNIC Tech datasheet](docs/rs621pxf-datasheet.pdf) (14 pp, sha256 `cad15b6d4c5f5e33`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/rs621pxf-datasheet.pdf)