main
History Download
Ray rs431bysf3: specified limits as data (metadata.characteristics, 25 rows from the datasheet) cabffd5

RS431BYSF3

Jiangsu RUNIC Tech · Voltage Reference · SOT-23

RS431BYSF3 from Jiangsu RUNIC Tech, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Cathode passive Shunt current/voltage input (K). Sinks 0.5 to 100mA and regulates VKA between VREF (~2.5V) and 36V according to the reference feedback.
2 Ref input Reference input (R) - threshold relative to the common Anode. Internally compared against the 2.5V bandgap; driven by an external resistor divider from Cathode to Anode to program the shunt voltage (VOUT = (1 + R1/R2) x VREF). Input current typ 1.5µA.
3 Anode passive Common anode pin (A), normally connected to ground. All device voltages are referenced to this pin.

Key specifications

Parameter Value
Manufacturer Jiangsu RUNIC Tech
Package SOT-23
Category PMIC
Pins 3

Ordering variants

Same part, different packaging or reel option.

  • RS431BYSF3
  • RS431AYSF3
  • RS432AYSF3
  • RS432BYSF3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Cathode Voltage VKA -0.3 37 V 4
Cathode Current Range (Continuous) IKA -100 155 mA 4
Reference Input Current Range IREF -0.05 10 mA 4
Operating temperature Topr -40 105 °C 4
Power Dissipation PD 370 mW 4
Storage temperature Tstg -55 150 °C 4
Electrostatic discharge Human-body model (HBM) V(ESD) 2000 V 4
Charge device model (CDM) V(ESD) 200 V 4
Cathode Voltage VKA 36 V minimum printed as VREF (symbolic, not numeric) 4
Cathode Current Range (Continuous) IKA 0.5 100 mA 4
Operating Ambient Temperature Range TA -40 105 °C 4
Reference Input Voltage (1% grade, B) VREF 2.475 2.5 2.525 V VKA=VREF, IKA=10mA 5
Deviation of Reference Input Voltage Over Temperature ΔVREF 4.5 25 mV VKA=VREF, IKA=10mA, Tmin ≤ TA ≤ Tmax 5
Ratio of Change in Reference Input Voltage to Change in Cathode Voltage (ΔVKA=10V~VREF) ΔVREF/ΔVKA -1 -2.7 mV/V IKA=10mA, ΔVKA=10V~VREF 5
Ratio of Change in Reference Input Voltage to Change in Cathode Voltage (ΔVKA=36V~10V) ΔVREF/ΔVKA -0.5 -2 mV/V IKA=10mA, ΔVKA=36V~10V 5
Reference Input Current IREF 1.5 4 uA IKA=10mA, R1=10kΩ, R2=∞ 5
Deviation of Reference Input Current Over Full Temperature Range ΔIREF/ΔTA 0.2 0.4 uA IKA=10mA, R1=10kΩ, R2=∞, TA=full Temperature 5
Minimum cathode current for regulation IKA(min) 0.3 0.5 mA VKA=VREF 5
Off-state cathode Current IKA(OFF) 0.05 0.5 uA VKA=36V, VREF=0V 5
Dynamic Impedance ZKA 0.15 0.5 Ω VKA=VREF, IKA=1 to 100mA, f≤1.0KHz 5
Junction-to-ambient thermal resistance RθJA 185.6 °C/W 4
Junction-to-case (top) thermal resistance RθJC(top) 104.3 °C/W 4
Junction-to-board thermal resistance RθJB 54.5 °C/W 4
Junction-to-top characterization parameter ψJT 31 °C/W 4
Junction-to-board characterization parameter ψJB 54.5 °C/W 4

CAD (KiCad official)

  • Symbol: RS431BYSF3
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23 (KiCad packages3D, STEP)
  • 3D model files: rs431bysf3-etched.step / rs431bysf3-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rs431bysf3.step / rs431bysf3.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
rs431bysf3.step 59 KB You want the bare part, or you mark your own boards.
rs431bysf3-etched.step 2.0 MB You want the part with RS431BYSF3 already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 493 faces against 69 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Jiangsu RUNIC Tech datasheet (9 pp, sha256 8f8161e218eaee64, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF