main
Ray rs3235yek: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 9d7962c
{
  "schema_version": 1,
  "type": "component",
  "slug": "rs3235yek",
  "title": "RS3235YEK",
  "brief": "Jiangsu RUNIC Tech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, ESOP8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "pmic",
    "rs3235yek"
  ],
  "component": {
    "mpn": "RS3235YEK",
    "manufacturer": "Jiangsu RUNIC Tech",
    "package": "ESOP8",
    "pin_count": 8,
    "category": "PMIC",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2311271014_Jiangsu-RUNIC-Tech-RS3235YEK_C19269211.pdf",
    "parts": {
      "symbol": "rs3235yek.kicad_sym",
      "footprint": "rs3235yek.kicad_mod",
      "model_3d": "rs3235yek-etched.glb",
      "model_3d_plain": "rs3235yek.glb",
      "model_3d_step": "rs3235yek-etched.step",
      "model_3d_step_plain": "rs3235yek.step",
      "lbr": "rs3235yek.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "POK",
        "type": "output",
        "description": "Power-OK signal output. Open-drain output that indicates the status of the output voltage by sensing FB voltage. Pulled low when output voltage is not within the Power-OK voltage window (rising threshold ~93% of VFB, hysteresis ~8%). Requires external pull-up resistor."
      },
      {
        "number": "2",
        "name": "EN",
        "type": "input",
        "description": "Active-high enable control pin. Applying voltage above ~1.2V enables the regulator (new soft-start each time); pulling below ~0.5V shuts down the output. When left open, an internal 800-2000kΩ pull-low resistor pulls EN low and shuts down the regulator. Max 6.0V."
      },
      {
        "number": "3",
        "name": "VIN",
        "type": "power_in",
        "description": "Main supply input pin for voltage conversion. Recommended operating range 1.0V to 6.0V. A decoupling capacitor (≥10μF) should be placed near this pin for filtering and transient response. Voltage is monitored for Power-On-Reset (rising POR threshold typ 0.9V)."
      },
      {
        "number": "4",
        "name": "VCNTL",
        "type": "power_in",
        "description": "Bias voltage input for internal control circuitry. Connect to a voltage source (+5V recommended, operating range 3.0V to 6.0V). A 0.1μF decoupling capacitor is typically placed near this pin. Voltage is monitored for Power-On-Reset (rising POR threshold typ 2.7V)."
      },
      {
        "number": "5",
        "name": "NC",
        "type": "unconnected",
        "description": "No Connection. Not internally bonded; leave floating or tie to GND per layout preference."
      },
      {
        "number": "6",
        "name": "VOUT",
        "type": "power_out",
        "description": "Regulator output pin. Connect a load capacitor (≥10μF, ESR 0-200mΩ) for stability and transient response. Output voltage is programmed by external resistor divider to FB. Provides up to 3A continuous / 4A peak. During shutdown, VOUT is discharged by an internal ~55Ω pull-low MOSFET."
      },
      {
        "number": "7",
        "name": "FB",
        "type": "input",
        "description": "Voltage feedback pin. Connect to an external resistor divider from VOUT to set output voltage; internal reference VREF = 0.8V. FB input current is ±100nA max. Also sensed by the POK comparator."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin of the circuitry. Connect to system ground plane; provides return path for both bias and power currents."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2311271014_Jiangsu-RUNIC-Tech-RS3235YEK_C19269211.pdf",
        "pages": 21,
        "sha256": "9e844e456273e744",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "rs3235yek.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.55
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "2d6f7e774e8143e3320cbd59eb5be9f3b7864614644e3b072006e1eb05fb7fa6",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "rs3235yek-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.55
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "317c7d32fdb53afdb3a6ffcb97c828a21338e9128f8dc031a406bb5da14f27b6",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Jiangsu RUNIC Tech",
      "Package": "ESOP8",
      "Category": "PMIC",
      "Pins": "8"
    }
  },
  "variants": [
    {
      "mpn": "RS3235YEK",
      "kind": "packaging"
    },
    {
      "mpn": "RS3235YEKYTDC10",
      "kind": "packaging"
    }
  ],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "rs3235yek"
  ],
  "discovery_pitch": "RS3235YEK (Jiangsu RUNIC Tech) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "rs3235yek.kicad_sym",
    "rs3235yek.kicad_mod",
    "rs3235yek.glb",
    "rs3235yek.step",
    "rs3235yek.lbr",
    "docs/hero.png",
    "docs/rs3235yek-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-25T05:01:22.320Z"
}