main
Ray
rs321xf: laser-etched CAD + chip hero (factory 2.0.0 backfill)
53a3587
RS321XF
Jiangsu RUNIC Tech · Operational Amplifier · SOT-23-5
RS321XF from Jiangsu RUNIC Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output. Diode-clamped to the supply rails; short-circuit current is typically ±54mA and current should be limited to ±100mA. Output swing from rail is 26mV typ with RL=2kΩ and 8mV typ with RL=10kΩ. |
| 2 | V- | power_in | Negative (lowest) power supply. For single-supply operation typically tied to GND; supports dual-supply operation down to -2.75V. Total supply Vs=(V+)-(V-) must be within 2.2V to 5.5V. |
| 3 | +IN | input | Non-inverting (positive) amplifier input. Rail-to-rail input; common-mode range -0.1V to Vs+0.1V (spec'd to 5.6V at Vs=5.5V). Diode-clamped to supplies; input current should be limited to ±10mA. |
| 4 | -IN | input | Inverting (negative) amplifier input. Rail-to-rail input; diode-clamped to supplies; input current should be limited to ±10mA. Input bias current typ ±1pA. |
| 5 | V+ | power_in | Positive (highest) power supply. Operating range 2.2V to 5.5V referenced to V-. Bypass with a local ceramic decoupling capacitor to V-. Quiescent current 60uA typ per amplifier. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | SOT-23-5 |
| Category | Op-amp/Cmp |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
RS321XFRS321XFBXFRS321XFXKRS321XFXMRS321XFSXH
CAD (KiCad official)
- Symbol:
RS321XF - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
rs321xf-etched.step/rs321xf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rs321xf.step/rs321xf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Jiangsu RUNIC Tech datasheet (25 pp, sha256
142a2f6526d0f1f6, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# RS321XF
**Jiangsu RUNIC Tech** · Operational Amplifier · SOT-23-5
RS321XF from Jiangsu RUNIC Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output. Diode-clamped to the supply rails; short-circuit current is typically ±54mA and current should be limited to ±100mA. Output swing from rail is 26mV typ with RL=2kΩ and 8mV typ with RL=10kΩ. |
| 2 | V- | power_in | Negative (lowest) power supply. For single-supply operation typically tied to GND; supports dual-supply operation down to -2.75V. Total supply Vs=(V+)-(V-) must be within 2.2V to 5.5V. |
| 3 | +IN | input | Non-inverting (positive) amplifier input. Rail-to-rail input; common-mode range -0.1V to Vs+0.1V (spec'd to 5.6V at Vs=5.5V). Diode-clamped to supplies; input current should be limited to ±10mA. |
| 4 | -IN | input | Inverting (negative) amplifier input. Rail-to-rail input; diode-clamped to supplies; input current should be limited to ±10mA. Input bias current typ ±1pA. |
| 5 | V+ | power_in | Positive (highest) power supply. Operating range 2.2V to 5.5V referenced to V-. Bypass with a local ceramic decoupling capacitor to V-. Quiescent current 60uA typ per amplifier. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | SOT-23-5 |
| Category | Op-amp/Cmp |
| Pins | 5 |
## Ordering variants
Same part, different packaging or reel option.
- `RS321XF`
- `RS321XFBXF`
- `RS321XFXK`
- `RS321XFXM`
- `RS321XFSXH`
## CAD (KiCad official)
- Symbol: `RS321XF`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `rs321xf-etched.step` / `rs321xf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `rs321xf.step` / `rs321xf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Jiangsu RUNIC Tech datasheet](docs/rs321xf-datasheet.pdf) (25 pp, sha256 `142a2f6526d0f1f6`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/rs321xf-datasheet.pdf)