component
RS2588AYF5
Public Made by Adomby adom
Jiangsu RUNIC Tech Power Distribution Switches, SOT23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownRS2588AYF5
Jiangsu RUNIC Tech · Power Distribution Switches · SOT23-5
RS2588AYF5 from Jiangsu RUNIC Tech, in a SOT23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Switch output, the P-channel drain of the power switch that typically connects to the load, and the datasheet notes it may be externally forced above VIN when the switch is disabled. |
| 2 | GND | power_in | Ground reference for the device; all voltages in the datasheet are specified with respect to this pin. |
| 3 | FLAG | output | Active-low open-drain fault output that asserts on over-current (only after the about 13 ms response delay tD) or thermal shutdown, with a maximum 0.4 V low level at 2 mA sink and up to 1.0 µA leakage when high. |
| 4 | EN | input | Active-high logic-level enable input with VIL max 0.4 V and VIH min 1.6 V, and an internal pull-down of 450 to 600 kΩ. |
| 5 | VIN | power_in | Power supply input and the P-channel source of the switch that also supplies the internal circuitry, specified for 2.5 V to 5.5 V with an absolute maximum of 6.0 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | SOT23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Quiescent supply current | IQ | 10 | 30 | 50 | μA | Switch on, VOUT = open | 8 |
| Shutdown supply current | ISD | 0.1 | 1 | μA | Switch off, VOUT = open | 8 | |
| Leakage current of VIN | ILKG(VIN) | 0.1 | 1 | μA | Switch off, VOUT = 0V | 8 | |
| Enable input threshold, low | VIL | 0.4 | V | VIN = 2.5V to 5.5V | 8 | ||
| Enable input threshold, high | VIH | 1.6 | V | VIN = 2.5V to 5.5V | 8 | ||
| EN input current | IEN | 10 | 15 | μA | VEN = 0V to 5.5V | 8 | |
| EN pin pull-down resistance | RPULL_DOWN | 450 | 520 | 600 | kΩ | VEN = 2.5V to 5.5V | 8 |
| Switch resistance | RDS(ON) | 70 | 80 | mΩ | IOUT = 500mA | 8 | |
| Current limit threshold (RS2588A) | 0.99 | 1.1 | 1.21 | A | Ramped load | 8 | |
| Leakage current of FLAG | ILKG(FLAG) | 0.1 | 1 | μA | FLAG is HIGH | 8 | |
| FLAG output low voltage | VFLAG-L | 0.4 | V | CIN=10uF, ISINK =2mA | 8 | ||
| VOUT shutdown discharge resistance | RDIS | 250 | 300 | 350 | Ω | Switch off | 8 |
| Supply input voltage (absolute maximum) | VIN | -0.3 | 6 | V | 7 | ||
| Output voltage (absolute maximum) | VOUT | -0.3 | 6 | V | 7 | ||
| EN input voltage (absolute maximum) | VEN | -0.3 | 6 | V | 7 | ||
| FLAG output voltage (absolute maximum) | VFLAG | -0.3 | 6 | V | 7 | ||
| Operating junction temperature (absolute maximum) | TJ | -40 | 150 | °C | 7 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 7 | ||
| Lead temperature | TL | 260 | °C | Soldering, 10secs | 7 | ||
| Input voltage (recommended) | VIN | 2.5 | 5.5 | V | 7 | ||
| EN voltage range (recommended) | VEN | 0 | 5.5 | V | 7 | ||
| All other pins voltage (recommended) | 0 | 5.5 | V | 7 | |||
| Operating temperature range | TA | -40 | 85 | °C | 7 | ||
| Operating junction temperature range | TJ | -40 | 125 | °C | 7 | ||
| Electrostatic discharge, human-body model | V(ESD) | -3000 | 3000 | V | Human-body model (HBM) | 7 | |
| Electrostatic discharge, charge device model | V(ESD) | -1500 | 1500 | V | Charge device model (CDM) | 7 | |
| Junction-to-ambient thermal resistance | RθJA | 185.6 | °C/W | 7 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 104.3 | °C/W | 7 | |||
| Junction-to-board thermal resistance | RθJB | 54.5 | °C/W | 7 | |||
| Junction-to-top characterization parameter | ψJT | 31 | °C/W | 7 | |||
| Junction-to-board characterization parameter | ψJB | 54.5 | °C/W | 7 |
CAD (KiCad official)
- Symbol:
RS2588AYF5 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT23-5 (KiCad packages3D, STEP)
- 3D model files:
rs2588ayf5-etched.step/rs2588ayf5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rs2588ayf5.step/rs2588ayf5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Jiangsu RUNIC Tech datasheet (18 pp, sha256
d90ad53c2f60d1e4, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).