main
Ray Publish 0.1.1 09144c8
{
  "schema_version": 1,
  "type": "component",
  "slug": "rs245ytss20",
  "title": "RS245YTSS20",
  "brief": "Jiangsu RUNIC Tech Buffers, Drivers, Receivers, Transceivers, TSSOP-20. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.1",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "logic",
    "rs245ytss20"
  ],
  "component": {
    "mpn": "RS245YTSS20",
    "manufacturer": "Jiangsu RUNIC Tech",
    "package": "TSSOP-20",
    "pin_count": 20,
    "category": "Logic",
    "subcategory": "Buffers, Drivers, Receivers, Transceivers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590905210204069888",
    "parts": {
      "symbol": "rs245ytss20.kicad_sym",
      "footprint": "rs245ytss20.kicad_mod",
      "model_3d": "rs245ytss20-hero.glb",
      "model_3d_plain": "rs245ytss20.glb",
      "model_3d_step": "rs245ytss20-etched.step",
      "model_3d_step_plain": "rs245ytss20.step",
      "lbr": "rs245ytss20.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "DIR",
        "type": "input",
        "description": "Direction control input. When OE is low: DIR=L routes B data to A bus; DIR=H routes A data to B bus. Must be held at a valid logic level; do not float."
      },
      {
        "number": "2",
        "name": "A0",
        "type": "bidirectional",
        "description": "A-port bit 0. Bidirectional data I/O; direction determined by DIR when OE is asserted (low). Hi-Z when OE is high or during Vcc isolation."
      },
      {
        "number": "3",
        "name": "A1",
        "type": "bidirectional",
        "description": "A-port bit 1. Bidirectional data I/O; direction determined by DIR when OE is asserted."
      },
      {
        "number": "4",
        "name": "A2",
        "type": "bidirectional",
        "description": "A-port bit 2. Bidirectional data I/O; direction determined by DIR when OE is asserted."
      },
      {
        "number": "5",
        "name": "A3",
        "type": "bidirectional",
        "description": "A-port bit 3. Bidirectional data I/O; direction determined by DIR when OE is asserted."
      },
      {
        "number": "6",
        "name": "A4",
        "type": "bidirectional",
        "description": "A-port bit 4. Bidirectional data I/O; direction determined by DIR when OE is asserted."
      },
      {
        "number": "7",
        "name": "A5",
        "type": "bidirectional",
        "description": "A-port bit 5. Bidirectional data I/O; direction determined by DIR when OE is asserted."
      },
      {
        "number": "8",
        "name": "A6",
        "type": "bidirectional",
        "description": "A-port bit 6. Bidirectional data I/O; direction determined by DIR when OE is asserted."
      },
      {
        "number": "9",
        "name": "A7",
        "type": "bidirectional",
        "description": "A-port bit 7. Bidirectional data I/O; direction determined by DIR when OE is asserted."
      },
      {
        "number": "10",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference (0 V) for the device."
      },
      {
        "number": "11",
        "name": "B7",
        "type": "bidirectional",
        "description": "B-port bit 7. Bidirectional data I/O; direction determined by DIR when OE is asserted."
      },
      {
        "number": "12",
        "name": "B6",
        "type": "bidirectional",
        "description": "B-port bit 6. Bidirectional data I/O; direction determined by DIR when OE is asserted."
      },
      {
        "number": "13",
        "name": "B5",
        "type": "bidirectional",
        "description": "B-port bit 5. Bidirectional data I/O; direction determined by DIR when OE is asserted."
      },
      {
        "number": "14",
        "name": "B4",
        "type": "bidirectional",
        "description": "B-port bit 4. Bidirectional data I/O; direction determined by DIR when OE is asserted."
      },
      {
        "number": "15",
        "name": "B3",
        "type": "bidirectional",
        "description": "B-port bit 3. Bidirectional data I/O; direction determined by DIR when OE is asserted."
      },
      {
        "number": "16",
        "name": "B2",
        "type": "bidirectional",
        "description": "B-port bit 2. Bidirectional data I/O; direction determined by DIR when OE is asserted."
      },
      {
        "number": "17",
        "name": "B1",
        "type": "bidirectional",
        "description": "B-port bit 1. Bidirectional data I/O; direction determined by DIR when OE is asserted."
      },
      {
        "number": "18",
        "name": "B0",
        "type": "bidirectional",
        "description": "B-port bit 0. Bidirectional data I/O; direction determined by DIR when OE is asserted."
      },
      {
        "number": "19",
        "name": "OE",
        "type": "input",
        "description": "Output Enable, active LOW. Drive low to enable the transceiver in the direction chosen by DIR; drive high to place both A and B ports in the high-impedance (3-state) mode. During power-up/down should be tied to Vcc through a pull-up resistor."
      },
      {
        "number": "20",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply voltage input. Operating range 1.65 V to 5.5 V. If Vcc is at GND both ports enter the high-impedance state (Vcc isolation)."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590905210204069888",
        "pages": 15,
        "sha256": "bb8b42fbb01f615f",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "rs245ytss20.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "97339947f3a7196470ec2f1d9f9b92bb2fc2ab66ad53be0cf105192585ef3c9a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "rs245ytss20-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "404262171d420dd9c0e02221eebe214b8b1bb8b33e861b99233e74a8377224ea",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Jiangsu RUNIC Tech",
      "Package": "TSSOP-20",
      "Category": "Logic",
      "Pins": "20"
    }
  },
  "variants": [
    {
      "mpn": "RS245YTSS20",
      "kind": "packaging"
    },
    {
      "mpn": "RS245YTSS20YS20",
      "kind": "packaging"
    }
  ],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "rs245ytss20"
  ],
  "discovery_pitch": "RS245YTSS20 (Jiangsu RUNIC Tech) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "rs245ytss20.kicad_sym",
    "rs245ytss20.kicad_mod",
    "rs245ytss20.glb",
    "rs245ytss20.step",
    "rs245ytss20.lbr",
    "docs/hero.png",
    "docs/rs245ytss20-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "rs245ytss20-etched.step",
    "rs245ytss20-hero.glb",
    "rs245ytss20-hero.overlay.json"
  ],
  "visibility": "public",
  "updated_at": "2026-09-25T04:59:42.603Z",
  "description": "Jiangsu RUNIC Tech Buffers, Drivers, Receivers, Transceivers, TSSOP-20. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "org": "adom"
}