main
Ray
rs2254xq: laser-etched CAD + chip hero (factory 2.0.0 backfill)
b46148b
RS2254XQ
Jiangsu RUNIC Tech · Analog Switches, Multiplexers · TSSOP-14
RS2254XQ from Jiangsu RUNIC Tech, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A IN/OUT | bidirectional | Switch A analog signal terminal (in/out). Bidirectional analog pass connection to pin 2 when Switch A control (pin 13) is HIGH. Signal range GND to VCC; RON ≈ 24 Ω typ at VCC=5 V. |
| 2 | A OUT/IN | bidirectional | Switch A analog signal terminal (out/in). Bidirectional analog pass connection to pin 1 when Switch A control (pin 13) is HIGH. |
| 3 | B OUT/IN | bidirectional | Switch B analog signal terminal (out/in). Bidirectional analog pass connection to pin 4 when Switch B control (pin 5) is HIGH. |
| 4 | B IN/OUT | bidirectional | Switch B analog signal terminal (in/out). Bidirectional analog pass connection to pin 3 when Switch B control (pin 5) is HIGH. |
| 5 | B | input | Digital control input for Switch B. HIGH (VIH ≥ 1.7 V) turns Switch B ON; LOW (VIL ≤ 0.5 V) turns it OFF. Must not be left floating - tie to VCC or GND when unused. |
| 6 | C | input | Digital control input for Switch C. HIGH turns Switch C ON; LOW turns it OFF. VIH ≥ 1.7 V, VIL ≤ 0.5 V. Must not be left floating. |
| 7 | GND | power_in | Device ground / negative supply reference. Sets the lower analog signal-range limit for all four switches. |
| 8 | C IN/OUT | bidirectional | Switch C analog signal terminal (in/out). Bidirectional analog pass connection to pin 9 when Switch C control (pin 6) is HIGH. |
| 9 | C OUT/IN | bidirectional | Switch C analog signal terminal (out/in). Bidirectional analog pass connection to pin 8 when Switch C control (pin 6) is HIGH. |
| 10 | D OUT/IN | bidirectional | Switch D analog signal terminal (out/in). Bidirectional analog pass connection to pin 11 when Switch D control (pin 12) is HIGH. |
| 11 | D IN/OUT | bidirectional | Switch D analog signal terminal (in/out). Bidirectional analog pass connection to pin 10 when Switch D control (pin 12) is HIGH. |
| 12 | D | input | Digital control input for Switch D. HIGH turns Switch D ON; LOW turns it OFF. VIH ≥ 1.7 V, VIL ≤ 0.5 V. Must not be left floating. |
| 13 | A | input | Digital control input for Switch A. HIGH turns Switch A ON; LOW turns it OFF. VIH ≥ 1.7 V, VIL ≤ 0.5 V. Must not be left floating. |
| 14 | VCC | power_in | Positive supply input. Recommended operating range 2.5 V to 5.5 V; absolute maximum 6 V. Bypass locally to GND (pin 7); sets the upper analog signal-range limit. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | TSSOP-14 |
| Category | Interface |
| Pins | 14 |
Ordering variants
RS2254XQRS2254XQXP
CAD (KiCad official)
- Symbol:
RS2254XQ - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
rs2254xq-etched.step/rs2254xq-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rs2254xq.step/rs2254xq.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Jiangsu RUNIC Tech datasheet (None pp, sha256
4f774cbcfd85096a, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# RS2254XQ
**Jiangsu RUNIC Tech** · Analog Switches, Multiplexers · TSSOP-14
RS2254XQ from Jiangsu RUNIC Tech, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A IN/OUT | bidirectional | Switch A analog signal terminal (in/out). Bidirectional analog pass connection to pin 2 when Switch A control (pin 13) is HIGH. Signal range GND to VCC; RON ≈ 24 Ω typ at VCC=5 V. |
| 2 | A OUT/IN | bidirectional | Switch A analog signal terminal (out/in). Bidirectional analog pass connection to pin 1 when Switch A control (pin 13) is HIGH. |
| 3 | B OUT/IN | bidirectional | Switch B analog signal terminal (out/in). Bidirectional analog pass connection to pin 4 when Switch B control (pin 5) is HIGH. |
| 4 | B IN/OUT | bidirectional | Switch B analog signal terminal (in/out). Bidirectional analog pass connection to pin 3 when Switch B control (pin 5) is HIGH. |
| 5 | B | input | Digital control input for Switch B. HIGH (VIH ≥ 1.7 V) turns Switch B ON; LOW (VIL ≤ 0.5 V) turns it OFF. Must not be left floating - tie to VCC or GND when unused. |
| 6 | C | input | Digital control input for Switch C. HIGH turns Switch C ON; LOW turns it OFF. VIH ≥ 1.7 V, VIL ≤ 0.5 V. Must not be left floating. |
| 7 | GND | power_in | Device ground / negative supply reference. Sets the lower analog signal-range limit for all four switches. |
| 8 | C IN/OUT | bidirectional | Switch C analog signal terminal (in/out). Bidirectional analog pass connection to pin 9 when Switch C control (pin 6) is HIGH. |
| 9 | C OUT/IN | bidirectional | Switch C analog signal terminal (out/in). Bidirectional analog pass connection to pin 8 when Switch C control (pin 6) is HIGH. |
| 10 | D OUT/IN | bidirectional | Switch D analog signal terminal (out/in). Bidirectional analog pass connection to pin 11 when Switch D control (pin 12) is HIGH. |
| 11 | D IN/OUT | bidirectional | Switch D analog signal terminal (in/out). Bidirectional analog pass connection to pin 10 when Switch D control (pin 12) is HIGH. |
| 12 | D | input | Digital control input for Switch D. HIGH turns Switch D ON; LOW turns it OFF. VIH ≥ 1.7 V, VIL ≤ 0.5 V. Must not be left floating. |
| 13 | A | input | Digital control input for Switch A. HIGH turns Switch A ON; LOW turns it OFF. VIH ≥ 1.7 V, VIL ≤ 0.5 V. Must not be left floating. |
| 14 | VCC | power_in | Positive supply input. Recommended operating range 2.5 V to 5.5 V; absolute maximum 6 V. Bypass locally to GND (pin 7); sets the upper analog signal-range limit. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | TSSOP-14 |
| Category | Interface |
| Pins | 14 |
## Ordering variants
- `RS2254XQ`
- `RS2254XQXP`
## CAD (KiCad official)
- Symbol: `RS2254XQ`
- Footprint: `Package_SO:TSSOP-14_4.4x5mm_P0.65mm`
- 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files: `rs2254xq-etched.step` / `rs2254xq-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `rs2254xq.step` / `rs2254xq.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Jiangsu RUNIC Tech datasheet](docs/rs2254xq-datasheet.pdf) (None pp, sha256 `4f774cbcfd85096a`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/rs2254xq-datasheet.pdf)