main
Ray Publish 0.1.2 9af5486
{
  "slug": "rs1g04xf5",
  "version": "0.1.2",
  "type": "component",
  "description": "Jiangsu RUNIC Tech Inverters, SOT23-5L. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "logic",
    "rs1g04xf5"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "rs1g04xf5.kicad_sym",
    "rs1g04xf5.kicad_mod",
    "rs1g04xf5.glb",
    "rs1g04xf5.step",
    "rs1g04xf5.lbr",
    "docs/hero.png",
    "docs/rs1g04xf5-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "rs1g04xf5-etched.step",
    "rs1g04xf5-etched.glb",
    "rs1g04xf5-hero.glb",
    "rs1g04xf5-hero.overlay.json"
  ],
  "component": {
    "mpn": "RS1G04XF5",
    "manufacturer": "Jiangsu RUNIC Tech",
    "package": "SOT23-5L",
    "pin_count": 5,
    "category": "Inverters",
    "parts": {
      "symbol": "rs1g04xf5.kicad_sym",
      "footprint": "rs1g04xf5.kicad_mod",
      "model_3d": "rs1g04xf5-hero.glb",
      "model_3d_plain": "rs1g04xf5.glb",
      "model_3d_step": "rs1g04xf5-etched.step",
      "model_3d_step_plain": "rs1g04xf5.step",
      "lbr": "rs1g04xf5.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "N.C.",
        "type": "unconnected",
        "description": "Not connected - no internal die bond. Datasheet recommends tying this pin to GND for use as a heat-spreading plane, but leaving it floating is electrically acceptable."
      },
      {
        "number": "2",
        "name": "A",
        "type": "input",
        "description": "Logic input to the inverter gate. CMOS-compatible; VIH = 0.65×VCC to 0.7×VCC and VIL = 0.35×VCC to 0.3×VCC depending on supply. Input is 5.5 V-tolerant regardless of VCC (Ioff / partial-power-down support)."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground / negative supply return for the device."
      },
      {
        "number": "4",
        "name": "Y",
        "type": "output",
        "description": "Inverted logic output (Y = A̅). Push-pull CMOS output rated for high drive: typ ±24 mA at VCC = 3.0 V and up to ±32 mA at VCC = 4.5 V. VOH ≥ VCC − 0.1 V and VOL ≤ 0.1 V at IO = 100 µA."
      },
      {
        "number": "5",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply input. Operating range 1.65 V to 5.5 V (1.5 V minimum for data retention only). Absolute max 6.5 V. Recommended decoupling with a 0.1 µF cap to GND close to the pin."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "cad_basis": {
        "from": [
          "README CAD section (factory cad_wording)",
          ".kicad_mod model path agrees"
        ],
        "missing": []
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "lcsc": "C5372438",
      "digikey": false,
      "mouser": false
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:15:06Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "models_3d": [
      {
        "file": "rs1g04xf5.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "rs1g04xf5-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "43f9f97498a507325530ef96a0db3428a0025a4aaa4439324c0560c230222df1",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "visibility": "public"
}