Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

RS1473XTQC16

Jiangsu RUNIC Tech · Analog To Digital Converters (ADC) · QFN-16L(3x3)

RS1473XTQC16 from Jiangsu RUNIC Tech, in a QFN-16L(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Power supply ground.
2 AVDD power_in ADC analog power supply; AVDD to GND is specified at 2.7 V to 5.25 V (3.3 V nominal).
3 REF input ADC positive reference input; decouple this pin with REFGND.
4 REFGND power_in Reference return; short to the analog ground plane.
5 AIN0 input Positive analog input for channel 0; full-scale input VIN = AINx − AINxGND spans 0 V to VREF.
6 AIN0GND input Ground-sense analog input for channel 0.
7 AIN1GND input Ground-sense analog input for channel 1.
8 AIN1 input Positive analog input for channel 1; full-scale input VIN = AINx − AINxGND spans 0 V to VREF.
9 NC unconnected Not connected internally; recommended to short this pin to GND.
10 NC unconnected Not connected internally; recommended to short this pin to GND.
11 CH_SEL input Selects the analog input channel (Low = channel 0, High = channel 1); change it within a one-clock window starting half a clock after the CS falling edge so the multiplexer output settles before sample start.
12 PDEN input Enables the power-down feature if high at the CS rising edge.
13 CS input SPI chip select, active low.
14 SCLK input Serial SPI clock input.
15 SDO output Serial data output of the SPI interface.
16 DVDD power_in Digital I/O supply; DVDD to GND is specified at 1.65 V to AVDD and must not exceed AVDD.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Jiangsu RUNIC Tech
Package QFN-16L(3x3)
Category Data Acquisition
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Current, signal input pin -10 10 mA 6
AVDD to GND, DVDD to GND -0.3 6 V 6
Digital input voltage to GND -0.3 V 6
Digital output pin -0.3 V CS, SCLK, SDO pins 6
Package thermal impedance, QFN3x3-16 θJA 70 °C/W QFN3x3-16 package, JESD-51 6
Operating range, ambient temperature TA -40 125 °C 6
Junction temperature TJ -40 150 °C 6
Storage temperature Tstg -55 150 °C 6
Supply voltage AVDD to GND AVDD 2.7 3.3 5.25 V 6
Supply voltage DVDD to GND DVDD 1.65 3.3 V 6
Full scale input 0 V VIN=AINx - AINxGND 6
Operating ambient temperature -40 125 °C 6
Full-scale input span 0 V AINx - AINxGND 7
Absolute input range AIN0, AIN1 -0.2 V 7
Absolute input range AIN0GND, AIN1GND -0.2 0.2 V 7
Integral nonlinearity INL -2.5 1.2 2.5 LSB 7
Differential linearity DNL -1 0.5 2 LSB 7
Offset error -6 2 6 LSB 7
Gain error -4 2 4 LSB 7
External reference 2.5 V 8
Input leakage current ILEAK -1 1 μA 8
Power supply AVDD AVDD 2.7 3.3 5.25 V 8
Power supply DVDD DVDD 1.65 3.3 V 8
Specified performance ambient temperature TA -40 125 °C 8

CAD (KiCad official)

  • Symbol: RS1473XTQC16
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: QFN-16L(3x3) (KiCad packages3D, STEP)
  • 3D model files: rs1473xtqc16-etched.step / rs1473xtqc16-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rs1473xtqc16.step / rs1473xtqc16.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Jiangsu RUNIC Tech datasheet (28 pp, sha256 3d0cafa981248f59, retrieved 2026-10-19, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF