main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs rpi-441c1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers rpi-441c1: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json rpi-441c1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md rpi-441c1: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray
rpi-441c1-etched.fit.json rpi-441c1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
rpi-441c1-etched.glb rpi-441c1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
rpi-441c1-etched.step rpi-441c1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
rpi-441c1.glb Publish 0.1.0 · Ray
rpi-441c1.kicad_mod Publish 0.1.0 · Ray
rpi-441c1.kicad_sym Publish 0.1.0 · Ray
rpi-441c1.lbr Publish 0.1.0 · Ray
rpi-441c1.step Publish 0.1.0 · Ray

RPI-441C1

ROHM · Photointerrupters - Slot Type - Transistor Output · DIP-4

RPI-441C1 from ROHM, in a DIP-4. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Anode passive Anode of the internal infrared LED emitter. Drive with forward current IF (typ. 20 mA, max. 50 mA) through a current-limiting resistor; VF = 1.3 V typ, 1.6 V max at IF = 50 mA. Reverse voltage VR must not exceed 5 V.
2 Cathode passive Cathode of the internal infrared LED emitter. Sinks the LED forward current to the return rail. LED power dissipation PD = 80 mW max.
3 Collector passive Collector of the internal silicon NPN phototransistor. Typically pulled up to VCC through a load resistor; VCEO max = 30 V, IC max = 30 mA, collector power dissipation PC = 80 mW max. On-state IC = 0.55 mA typ (IF = 20 mA, VCE = 5 V); VCE(sat) ≤ 0.4 V.
4 Emitter passive Emitter of the internal silicon NPN phototransistor. Normally tied to GND. Reverse emitter-collector voltage VECO must not exceed 4.5 V. Dark current ICEO ≤ 0.5 µA at VCE = 10 V.

Key specifications

Parameter Value
Manufacturer ROHM
Package DIP-4
Category Sensor
Pins 4

CAD (KiCad official)

  • Symbol: RPI-441C1
  • Footprint: Package_DIP:DIP-4_W7.62mm
  • 3D model: DIP-4 (KiCad packages3D, STEP)
  • 3D model files: rpi-441c1-etched.step / rpi-441c1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rpi-441c1.step / rpi-441c1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ROHM datasheet (6 pp, sha256 02c7758798e8bd75, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF