Generated by kicad-footprint-generator · KiCad file format 20260206
RP402N501F-TR-FE
Ricoh Elec Devices · DC-DC Converters · SOT-23-5
RP402N501F-TR-FE from Ricoh Elec Devices, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Lx | passive | Internal NMOS switch drain pin, connected to the inductor; absolute maximum voltage is -0.3 to 6.5 V. |
| 2 | GND | power_in | Ground pin. |
| 3 | CE | input | Active-high chip enable pin; absolute maximum voltage is -0.3 to 6.5 V, and switching it from high to low releases the latch-type protection. |
| 4 | VIN | power_in | Power supply pin; recommended input voltage is 0.6 to 4.8 V and absolute maximum is -0.3 to 6.5 V. |
| 5 | VOUT | power_out | Output pin with fixed output voltage of 1.8 V to 5.5 V; absolute maximum voltage is -0.3 to 7.0 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Ricoh Elec Devices |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | 4.925 | 5 | 5.075 | V | VIN = VCE = 1.5 V, Ta = 25°C (RP402x50xx) | 11 |
| Start-up Voltage | VSTART | 0.7 | 0.8 | V | RL = 5.5 kΩ | 9 | |
| Hold-on Voltage after start-up | VHOLD | 0.6 | V | RL = 5.5 kΩ | 9 | ||
| OVLO Voltage | VOVLO | 4.8 | 5.1 | V | 9 | ||
| Quiescent Current 2 | IDD2 | 21 | 37 | µA | VIN = VSET −0.4 V, VOUT = VSET + 0.2 V | 9 | |
| Standby Current | Istandby | 0.2 | 1 | µA | RP402xxxxA/B/E/F, VIN = 4.8 V, VOUT = 0 V, VCE = 0 V | 9 | |
| Switching Frequency | fosc | 1080 | 1200 | 1320 | kHz | RP402xxx1x, VIN = 1.5 V, VOUT = 0.95 x VSET | 9 |
| Switching Frequency (−40 to 85°C) | fosc | 1020 | 1200 | 1380 | kHz | RP402xxx1x, VIN = 1.5 V, VOUT = 0.95 x VSET, guaranteed by design −40°C ≤ Ta ≤ 85°C | 9 |
| CE H Input Current | ICEH | 0.5 | µA | VIN = 4.8 V, VOUT = VCE = 5 V | 9 | ||
| CE L Input Current | ICEL | -0.5 | µA | VIN = 4.8 V, VOUT = 5 V, VCE = 0 V | 9 | ||
| Lx H Leakage Current | ILXH | 0.5 | µA | VIN = VOUT = VLX = 4.8 V, VCE = 0 V | 9 | ||
| Lx L Leakage Current | ILXL | 0.5 | µA | VOUT = 5 V, VLX = 0 V, VCE = 0 V | 9 | ||
| Lx Limit Current | ILXPEAK | 1.3 | 1.5 | A | 9 | ||
| CE H Input Voltage | VCEH | 0.7 | V | 10 | |||
| CE L Input Voltage | VCEL | 0.3 | V | 10 | |||
| Oscillator Maximum Duty Cycle | Maxduty | 80 | 88 | 95 | % | VIN = 1.5 V, VOUT = 0.95 x VSET | 10 |
| Soft-start Time | tstart | 0.25 | 0.5 | 0.7 | ms | VCE = 0 V to 1.5 V, VOUT = VSET x 0.95, VIN ≥ 1.7 V | 10 |
| VIN Zero Current | IINZERO | 0.1 | 1 | µA | VIN = 0 V, VOUT = 5.5 V | 10 | |
| Output-Voltage Temperature Coefficient | ΔVOUT/ΔTa | 50 | ppm/°C | −40°C ≤ Ta ≤ 85°C, ±50 as printed | 9 | ||
| Start-up Voltage Max (VIN-related) Quiescent Current 1 | IDD1 | 1.6 | mA | VIN = VSET −0.4 V, VOUT = 0.95 x VSET | 9 | ||
| NMOS ON Resistance | RONN | 0.2 | Ω | VOUT = 5.0 V | 9 | ||
| PMOS ON Resistance | RONP | 0.2 | Ω | VOUT = 5.0 V | 9 | ||
| Anti-ringing Switch ON Resistance | RONA | 100 | Ω | VIN = 2.5 V, VOUT = 3.3 V | 10 | ||
| OVP Voltage | VOVP | 6 | V | 9 | |||
| VIN Pin Voltage | VIN | -0.3 | 6.5 | V | 8 | ||
| VOUT Pin Voltage | VOUT | -0.3 | 7 | V | 8 | ||
| LX Pin Voltage | VLX | -0.3 | 6.5 | V | 8 | ||
| CE Pin Voltage | VCE | -0.3 | 6.5 | V | 8 | ||
| Power Dissipation | PD | 660 | mW | SOT-23-5, JEDEC STD. 51-7 | 8 | ||
| Junction Temperature Range | Tj | -40 | 125 | °C | 8 | ||
| Storage Temperature Range | Tstg | -55 | 125 | °C | 8 | ||
| Input Voltage | VIN | 0.6 | 4.8 | V | 8 | ||
| Operating Temperature | Ta | -40 | 85 | °C | 8 |
CAD (KiCad official)
- Symbol:
RP402N501F-TR-FE - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
rp402n501f-tr-fe-etched.step/rp402n501f-tr-fe-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rp402n501f-tr-fe.step/rp402n501f-tr-fe.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Ricoh Elec Devices datasheet (43 pp, sha256
fc836fda3a267716, retrieved 2026-10-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).