Generated by kicad-footprint-generator · KiCad file format 20260206
RP114N331D-TR-FF
Ricoh Elec Devices · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
RP114N331D-TR-FF from Ricoh Elec Devices, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Input supply pin. Operating range 1.4V to 5.25V (absolute max 6.0V). Bypass to GND with ≥1.0µF ceramic capacitor placed as close as possible to the pin. |
| 2 | GND | power_in | Ground reference pin. Provide a low-impedance return trace to minimize noise pickup and dropout error. |
| 3 | CE | input | Chip Enable pin, active HIGH. VCEH ≥ 1.0V enables the regulator; VCEL ≤ 0.4V places the device in standby (Istandby typ 0.1µA). Internal pull-down ~0.3µA (typ). Absolute max 6.0V. |
| 4 | NC | unconnected | No Connection. Pin is not internally bonded; may be left floating or tied to GND for mechanical stability. |
| 5 | VOUT | power_out | Regulated 3.3V output pin (RP114x33xx). Sources up to 300mA continuous. Requires a ≥1.0µF ceramic output capacitor for phase compensation, placed as close to the pin as possible. D-version includes an internal Nch auto-discharge switch (~50Ω) that pulls VOUT to GND when CE is de-asserted. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Ricoh Elec Devices |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
Ordering variants
RP114N331D-TR-FFRP114Nxx1B-TR-FERP114N331D-TR-FFRP114Nxx1D-TR-FERP114N331D-TR-FFRP114N331D-TR-FFRP114Kxx1B-TRRP114N331D-TR-FFRP114Kxx1D-TRRP114N331D-TR-FFRP114Qxx2B-TR-FERP114N331D-TR-FFRP114Qxx2D-TR-FE
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (Ta=25°C, multiplier of VSET) | VOUT | 0.99 | 1.01 | V | Ta=25°C, VSET > 2.0V | 5 | |
| Output Voltage (-40°C to 85°C, multiplier of VSET) | VOUT | 0.97 | 1.03 | V | -40°C ≤ Ta ≤ 85°C, VSET > 2.0V | 5 | |
| Output Voltage Temperature Coefficient | ΔVOUT/ΔTa | -80 | 80 | ppm/°C | -40°C ≤ Ta ≤ 85°C | 5 | |
| Output Current | IOUT | 300 | mA | 5 | |||
| Load Regulation | ΔVOUT/ΔIOUT | 15 | 40 | mV | 1mA ≤ IOUT ≤ 300mA | 5 | |
| Dropout Voltage (VSET 3.0 to 3.6V) | VDIF | 0.22 | 0.29 | V | IOUT=300mA, 3.0 ≤ VSET ≤ 3.6 | 6 | |
| Supply Current | ISS | 50 | 75 | μA | IOUT=0mA | 5 | |
| Standby Current | Istandby | 0.1 | 1 | μA | VCE=0V | 5 | |
| Line Regulation | ΔVOUT/ΔVIN | 0.02 | 0.1 | %/V | VSET+0.5V ≤ VIN ≤ 5.25V (VIN ≥ 1.4V) | 5 | |
| Ripple Rejection | RR | 75 | dB | f=1kHz, Ripple 0.2Vp-p, VIN=VSET+1V, IOUT=30mA | 5 | ||
| Input Voltage | VIN | 1.4 | 5.25 | V | 5 | ||
| Short Current Limit | ISC | 60 | mA | VOUT=0V | 5 | ||
| CE Pull-down Current | IPD | 0.3 | 0.6 | μA | 5 | ||
| CE Input Voltage High | VCEH | 1 | V | 5 | |||
| CE Input Voltage Low | VCEL | 0.4 | V | 5 | |||
| Output Noise | en | 75 | μVrms | BW=10Hz to 100kHz, IOUT=30mA | 5 | ||
| LOW Output Nch On Resistance (D version) | RLOW | 50 | Ω | VIN=4.0V, VCE=0V | 5 | ||
| Input Voltage (operating range) | VIN | 6 | V | 4 | |||
| CE Input Voltage | VCE | 6 | V | CE pin | 4 | ||
| Output Voltage | VOUT | -0.3 | V | Maximum is VIN+0.3 V | 4 | ||
| Output Current | IOUT | 400 | mA | 4 | |||
| Power Dissipation (SOT-23-5) | PD | 420 | mW | SOT-23-5 package, see package information | 4 | ||
| Operating Temperature Range | Topt | -40 | 85 | °C | 4 | ||
| Storage Temperature Range | Tstg | -55 | 125 | °C | 4 | ||
| Guaranteed Ambient Temperature Range | Ta | -40 | 85 | °C | Electrical specifications guaranteed by design | 5 | |
| Thermal Resistance, Junction-to-Ambient (standard land pattern) | θja | 238 | °C/W | Standard land pattern, Ta=25°C, Tjmax=125°C | 14 | ||
| Thermal Resistance, Junction-to-Ambient (free air) | θja | 400 | °C/W | Free air, Ta=25°C, Tjmax=125°C | 14 |
CAD (KiCad official)
- Symbol:
RP114N331D-TR-FF - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
rp114n331d-tr-ff-etched.step/rp114n331d-tr-ff-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rp114n331d-tr-ff.step/rp114n331d-tr-ff.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Ricoh Elec Devices datasheet (None pp, sha256
b8b487247a195114, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).