main
Ray Publish 0.1.0 01c1dfa

RP112N331D-TR-FE

Ricoh Elec Devices · Linear Voltage Regulators (LDO) · SOT-23-5

RP112N331D-TR-FE from Ricoh Elec Devices, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Input pin; the input voltage range is 2.0 V to 5.25 V, with an absolute maximum of 6.0 V.
2 GND power_in Ground pin.
3 CE input Chip enable pin, active "H"; the datasheet gives the CE input threshold as VCEH 1.0 V max and VCEL 0.4 V, with an absolute maximum CE input voltage of 6.0 V.
4 NC unconnected No connection.
5 VOUT power_out Output pin; the rated output current is 150 mA, and VOUT is limited to −0.3 V to VIN + 0.3 V.

Key specifications

Parameter Value
Manufacturer Ricoh Elec Devices
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage (Ta = 25°C) VOUT 3.267 3.3 3.333 V Ta = 25°C; RP112x33xx product-specific row 7
Output Voltage (−40°C ≤ Ta ≤ 85°C) VOUT 3.251 3.3 3.35 V −40°C ≤ Ta ≤ 85°C; RP112x33xx product-specific row 7
Load Regulation ∆VOUT/∆IOUT -14 0 14 mV 1 mA ≤ IOUT ≤ 150 mA 5
Dropout Voltage VDIF 0.2 0.28 V Ta = 25°C 7
Supply Current ISS 75 100 µA IOUT = 0 mA, VOUT < 4.1 V 5
Standby Current Istandby 0.1 1 µA VCE = 0 V 5
Line Regulation ∆VOUT/∆VIN 0.02 0.1 %/V Set VOUT + 0.5 V ≤ VIN ≤ 5.0 V, 1.7 V ≤ VOUT < 4.1 V 5
Ripple Rejection RR 80 dB Ripple 0.2 Vp-p, IOUT = 30 mA, VIN = Set VOUT + 1.0 V (VOUT < 4.1 V), f = 1 kHz 5
Ripple Rejection RR 75 dB Ripple 0.2 Vp-p, IOUT = 30 mA, VIN = Set VOUT + 1.0 V (VOUT < 4.1 V), f = 10 kHz 5
Ripple Rejection RR 65 dB Ripple 0.2 Vp-p, IOUT = 30 mA, VIN = Set VOUT + 1.0 V (VOUT < 4.1 V), f = 100 kHz 5
Input Voltage VIN 2 5.25 V 5
Output Voltage Temperature Coefficient ∆VOUT/∆Ta -30 30 ppm/°C −40°C ≤ Ta ≤ 85°C 5
Short Current Limit ISC 40 mA VOUT = 0 V 5
Output Current IOUT 150 mA 5
CE Pull-down Current IPD 0.3 0.6 µA 5
CE Input Voltage "H" VCEH 1 V 5
CE Input Voltage "L" VCEL 0.4 V 5
Output Noise en 10 µVrms BW = 10 Hz to 100 kHz, IOUT = 30 mA 6
Auto-discharge Nch Transistor ON Resistance (RP112xxxxD) RLOW 60 Ω VIN = 4.0 V, VCE = 0 V 6
Input Voltage (absolute maximum) VIN 6 V 4
Input Voltage (CE pin, absolute maximum) VCE 6 V 4
Output Voltage (absolute maximum) VOUT -0.3 V Upper limit VIN + 0.3 V 4
Output Current (absolute maximum) IOUT 180 mA 4
Power Dissipation (SOT-23-5) PD 660 mW JEDEC STD. 51-7 test land pattern 4
Junction Temperature Range Tj -40 125 °C 4
Storage Temperature Range Tstg -55 125 °C 4
Input Voltage (recommended operating) VIN 2 5.25 V 4
Operating Temperature Ta -40 85 °C 4
Thermal Resistance Junction-to-Ambient (SOT-23-5) θja 150 °C/W Ta = 25°C, Tjmax = 125°C, JEDEC STD. 51-7 four-layer board 27
Thermal Characterization Parameter Junction-to-Top (SOT-23-5) ψjt 51 °C/W Ta = 25°C, Tjmax = 125°C, JEDEC STD. 51-7 four-layer board 27

CAD (KiCad official)

  • Symbol: RP112N331D-TR-FE
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: rp112n331d-tr-fe-etched.step / rp112n331d-tr-fe-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rp112n331d-tr-fe.step / rp112n331d-tr-fe.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Ricoh Elec Devices datasheet (29 pp, sha256 e18c21a25bb403fb, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF