component
RN2025
Public Made by Adomby adom
RENERGY Energy Metering ICs, LQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Set visibility: public
85fad9a
12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115
{
"schema_version": 1,
"type": "component",
"slug": "rn2025",
"title": "RN2025",
"brief": "RENERGY Energy Metering ICs, LQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"adc-dac-data conversion",
"rn2025",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "RN2025",
"manufacturer": "RENERGY",
"package": "LQFP-64(10x10)",
"pin_count": 64,
"category": "ADC/DAC/Data Conversion",
"subcategory": "Energy Metering ICs",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/0573edd7c3d9a0de03fb8a5a613b0be3.pdf",
"parts": {
"symbol": "rn2025.kicad_sym",
"footprint": "rn2025.kicad_mod",
"model_3d": "rn2025-hero.glb",
"model_3d_plain": "rn2025.glb",
"model_3d_step": "rn2025-etched.step",
"model_3d_step_plain": "rn2025.step",
"lbr": "rn2025.lbr"
},
"distributor_links": {
"lcsc": "C2998736"
},
"distributor_check": {
"checked_at": "2026-11-13T14:34:23Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"pins": [
{
"number": "1",
"name": "AVCC1",
"type": "power_in",
"description": "Metering ADC supply input; isolate from AVCC2 with a 10 Ω resistor and decouple with 1 µF in parallel with 0.1 µF."
},
{
"number": "2",
"name": "IBN",
"type": "input",
"description": "Current channel B negative fully differential analog input; maximum differential peak is ±1000 mV at PGA=1."
},
{
"number": "3",
"name": "IBP",
"type": "input",
"description": "Current channel B positive fully differential analog input; maximum differential peak is ±1000 mV at PGA=1."
},
{
"number": "4",
"name": "IAN",
"type": "input",
"description": "Current channel A negative fully differential analog input; maximum differential peak is ±1000 mV at PGA=1."
},
{
"number": "5",
"name": "IAP",
"type": "input",
"description": "Current channel A positive fully differential analog input; maximum differential peak is ±1000 mV at PGA=1."
},
{
"number": "6",
"name": "AVSS1",
"type": "power_in",
"description": "Analog ground of the internal metering ADC."
},
{
"number": "7",
"name": "AVSS2",
"type": "power_in",
"description": "Analog ground of the self-check (EDT) circuit."
},
{
"number": "8",
"name": "UASP_400",
"type": "output",
"description": "Outputs a 400 µA current-source square wave for phase-A voltage fault detection; if self-check is unused it may float on RN2025A64/B64, but on RN2025C64 it must follow the self-check wiring and WriteUEdtVBCtlReg must be called."
},
{
"number": "9",
"name": "RP",
"type": "output",
"description": "Typical output voltage 1.25 V; connect an external 6.2 kΩ resistor to ground, of the same resistor type as the voltage-divider resistors, to set the voltage self-check reference current."
},
{
"number": "10",
"name": "P60/SDAIN8/CF0/RTC_OUT",
"type": "bidirectional",
"description": "GPIO P60 multiplexed with GPADC input SDAIN8 (for DC test), CF0 pulse output and RTC_OUT."
},
{
"number": "11",
"name": "ISP",
"type": "output",
"description": "Outputs a 2 V square wave for the P side of the current-channel self-check circuit; connect a low-tempco resistor of about 49.9 Ω, and float it if self-check is unused."
},
{
"number": "12",
"name": "AVCC2",
"type": "power_in",
"description": "Self-check circuit supply; decouple with 220 µF in parallel with 10 µF plus 0.1 µF and provide at least 50 mA of supply capability."
},
{
"number": "13",
"name": "P44/SDAIN0/TX4/INT6",
"type": "bidirectional",
"description": "GPIO P44 multiplexed with GPADC input SDAIN0, UART4 TX (cannot be configured as IR-modulated output) and INT6."
},
{
"number": "14",
"name": "P45/SDAIN1/RX4/INT7",
"type": "bidirectional",
"description": "GPIO P45 multiplexed with GPADC input SDAIN1, UART4 RX and INT7."
},
{
"number": "15",
"name": "P46/SDAIN2/TX5/KEY6",
"type": "bidirectional",
"description": "GPIO P46 multiplexed with GPADC input SDAIN2, UART5 TX (cannot be configured as IR-modulated output) and KEY6."
},
{
"number": "16",
"name": "P47/SDAIN3/RX5/KEY7/CF4/CF0/RTCOUT",
"type": "bidirectional",
"description": "GPIO P47 multiplexed with GPADC input SDAIN3, UART5 RX, KEY7, CF4, CF0 and RTCOUT."
},
{
"number": "17",
"name": "DVCC",
"type": "power_in",
"description": "Digital supply input; decouple with 1 µF plus 0.1 µF and isolate from AVCC2 with a 10 Ω resistor."
},
{
"number": "18",
"name": "DGND",
"type": "power_in",
"description": "Digital ground of the internal LDO18 domain."
},
{
"number": "19",
"name": "LDO18",
"type": "power_out",
"description": "Internal 1.8 V LDO output that powers the 1.8 V digital domain; decouple with 1 µF plus 0.1 µF."
},
{
"number": "20",
"name": "RSTN",
"type": "input",
"description": "Active-low external reset with an internal pull-up of about 50 kΩ and CMOS input level; a low level longer than 1 ms causes reset."
},
{
"number": "21",
"name": "P00/CMP0/INT0/CF2",
"type": "bidirectional",
"description": "GPIO P00 multiplexed with comparator CMP0 input, INT0 and CF2; the default configuration gives the comparator an internal ~600 kΩ pull-down to ground."
},
{
"number": "22",
"name": "P02/CF0/RTCOUT/SDAIN5",
"type": "bidirectional",
"description": "GPIO P02 with 6 mA drive, multiplexed with CF0 pulse output, RTCOUT (RTC 1 Hz output) and GPADC input SDAIN5."
},
{
"number": "23",
"name": "P03/CF1/TCI/TC0_P[0]/RTC_OUT/RTC_1s",
"type": "bidirectional",
"description": "GPIO P03 with 6 mA drive, multiplexed with CF1 pulse output, timer 0 input/output, RTC_OUT and RTC_1S."
},
{
"number": "24",
"name": "P06/INT1/SCSN0_1_2",
"type": "bidirectional",
"description": "GPIO P06 with optional pull-up, TTL/CMOS input and open-drain, multiplexed with INT1 and the SPI0/1/2 chip-select (slave mode only)."
},
{
"number": "25",
"name": "P07/KEY1/SCLK0_1_2",
"type": "bidirectional",
"description": "GPIO P07 with optional pull-up, TTL/CMOS input and open-drain, multiplexed with KEY1 and the SPI0/1/2 clock."
},
{
"number": "26",
"name": "P10/INT2/MOSI0_1/SDI2",
"type": "bidirectional",
"description": "GPIO P10 with optional pull-up, TTL/CMOS input and open-drain, multiplexed with INT2 and the SPI MOSI/SDI."
},
{
"number": "27",
"name": "P11/KEY2/MISO0_1/SDO2",
"type": "bidirectional",
"description": "GPIO P11 with optional pull-up, TTL/CMOS input and open-drain, multiplexed with KEY2 and the SPI MISO/SDO."
},
{
"number": "28",
"name": "P12/SCSN0_1_2/TCI/TC0_P[0]",
"type": "bidirectional",
"description": "GPIO P12 with optional pull-up, TTL/CMOS input and open-drain, multiplexed with SPI0/1/2 chip-select, timer input and timer 0 output."
},
{
"number": "29",
"name": "P13/SCLK0_1_2/TCI/TC0_N[0]",
"type": "bidirectional",
"description": "GPIO P13 with optional pull-up, TTL/CMOS input and open-drain, multiplexed with SPI0/1/2 clock, timer input and timer 0 output."
},
{
"number": "30",
"name": "P14/MOSI0_1/SDI2/TCI/TC0_P[1]",
"type": "bidirectional",
"description": "GPIO P14 with optional pull-up, TTL/CMOS input and open-drain, multiplexed with SPI MOSI/SDI, timer input and timer 0 output."
},
{
"number": "31",
"name": "P15/MISO0_1/SDO2/TCI/TC0_N[1]",
"type": "bidirectional",
"description": "GPIO P15 with optional pull-up, TTL/CMOS input and open-drain, multiplexed with SPI MISO/SDO, timer input and timer 0 output."
},
{
"number": "32",
"name": "P16/HOSCO/INT3/SCSN3",
"type": "bidirectional",
"description": "High-frequency crystal output (8.192, 16.384 or 32.768 MHz) multiplexed with GPIO P16, INT3 and SPI3 chip-select; add a 10 MΩ series resistor and two 15-22 pF load capacitors, and select a crystal with load capacitance below 15 pF."
},
{
"number": "33",
"name": "P17/HOSCI/INT4/SCLK3",
"type": "bidirectional",
"description": "High-frequency crystal input multiplexed with GPIO P17, INT4 and SPI3 clock; P16 and P17 select HOSC together."
},
{
"number": "34",
"name": "DGND",
"type": "power_in",
"description": "Digital ground."
},
{
"number": "35",
"name": "SWDCLK/P20/RX1/RX2/CF3/RTC_1s/TC0_P[1]",
"type": "bidirectional",
"description": "SWD clock multiplexed with GPIO P20, UART1/UART2 RX, CF3, RTC_1S and timer 0 output; SWD pins are pulled up by default after power-up."
},
{
"number": "36",
"name": "SWDIO/P21/TX1/TX2/CF2/TC0_P[0]/RTC_OUT",
"type": "bidirectional",
"description": "SWD data multiplexed with GPIO P21, UART1/UART2 TX, CF2, timer 0 output and RTC_OUT; SWD pins are pulled up by default after power-up."
},
{
"number": "37",
"name": "P30/ISPEN/TCI/KEY3/CF4/TC1_P[1]/RTC_OUT",
"type": "bidirectional",
"description": "GPIO P30 with 6 mA drive; the BOOTROM samples this pin after reset and enters ISP if it is low, so the application must account for this."
},
{
"number": "38",
"name": "P22/RX2/KEY4/MOSI3/TC1_N[0]/CF4",
"type": "bidirectional",
"description": "GPIO P22 multiplexed with UART2 RX, KEY4, SPI3 MOSI, timer 1 output and CF4."
},
{
"number": "39",
"name": "P23/TX2/KEY5/MISO3/TC1_P[0]/RTC_OUT",
"type": "bidirectional",
"description": "GPIO P23 multiplexed with UART2 TX, KEY5, SPI3 MISO, timer 1 output and RTC_OUT."
},
{
"number": "40",
"name": "P24/SCL/TCI/TC1_P[0]/SCSN4/CF4",
"type": "bidirectional",
"description": "GPIO P24 with optional pull-up, TTL/CMOS input and open-drain, multiplexed with I2C SCL, timer input/output, SPI4 chip-select and CF4."
},
{
"number": "41",
"name": "P25/SDA/TCI/TC1_P[1]/SCLK4/RTC_OUT",
"type": "bidirectional",
"description": "GPIO P25 with optional pull-up, TTL/CMOS input and open-drain, multiplexed with I2C SDA, timer input/output, SPI4 clock and RTC_OUT."
},
{
"number": "42",
"name": "P26/RX3/TCI/TC1_N[0]/CF2/RTC_OUT/MOSI4",
"type": "bidirectional",
"description": "GPIO P26 with optional pull-up, TTL/CMOS input and open-drain, multiplexed with UART3 RX, timer, CF2, RTC_OUT and SPI4 MOSI."
},
{
"number": "43",
"name": "P27/TX3/TCI/TC1_N[1]/CF3/RTC_1s/MISO4",
"type": "bidirectional",
"description": "GPIO P27 with optional pull-up, TTL/CMOS input and open-drain, multiplexed with UART3 TX, timer, CF3, RTC_1S and SPI4 MISO."
},
{
"number": "44",
"name": "P31/SDO2/MISO0_1/SCL/CF4/RTC_OUT",
"type": "bidirectional",
"description": "GPIO P31 with optional pull-up, TTL/CMOS input and open-drain, multiplexed with SPI MISO/SDO, I2C SCL, CF4 and RTC_OUT."
},
{
"number": "45",
"name": "P32/SDI2/MOSI0_1/SDA/CF3/RTC_1S",
"type": "bidirectional",
"description": "GPIO P32 with optional pull-up, TTL/CMOS input and open-drain, multiplexed with SPI MOSI/SDI, I2C SDA, CF3 and RTC_1S."
},
{
"number": "46",
"name": "P33/SCLK2/SCLK0_1/RX2/CF2/RTC_OUT/RTC_1S",
"type": "bidirectional",
"description": "GPIO P33 with optional pull-up, TTL/CMOS input and open-drain, multiplexed with SPI clock, UART2 RX, CF2, RTC_OUT and RTC_1S."
},
{
"number": "47",
"name": "P34/SCSN2/SCSN0_1/TX2/CF1/RTC_OUT/RTC_1S",
"type": "bidirectional",
"description": "GPIO P34 with optional pull-up, TTL/CMOS input and open-drain, multiplexed with SPI chip-select, UART2 TX, CF1, RTC_OUT and RTC_1S."
},
{
"number": "48",
"name": "LXO",
"type": "passive",
"description": "32.768 kHz passive crystal output; no external resistor or capacitor is needed (on-chip), and it must be guarded from neighbouring signals by ground."
},
{
"number": "49",
"name": "LXI",
"type": "passive",
"description": "32.768 kHz passive crystal input, paired with LXO; no external resistor or capacitor is needed and it must be guarded by ground."
},
{
"number": "50",
"name": "BVSS",
"type": "power_in",
"description": "Ground of the VBAT domain."
},
{
"number": "51",
"name": "LDO_VBAT",
"type": "power_out",
"description": "VBAT-domain LDO output; requires an external 0.22 µF capacitor."
},
{
"number": "52",
"name": "VBAT",
"type": "power_in",
"description": "3.6 V battery or supercapacitor input that powers only the RTC; it is also the SAR ADC input (two internal 300 kΩ divider resistors, 0.5× gain), and an RC filter of 10 Ω and 1 µF is recommended."
},
{
"number": "53",
"name": "VREFB",
"type": "output",
"description": "SAR ADC internal reference output, typically 1.25 V; requires an external 0.22 µF capacitor."
},
{
"number": "54",
"name": "P40/KEY6/AIN3",
"type": "bidirectional",
"description": "VBAT-domain GPIO P40 with KEY6 and SAR ADC input AIN3, which can measure up to 3.6 V at 0.5× PGA; the input-high level must not exceed VBAT."
},
{
"number": "55",
"name": "P41/KEY7/AIN2",
"type": "bidirectional",
"description": "VBAT-domain GPIO P41 with KEY7 and SAR ADC input AIN2; the input range must not exceed 1.25 V (PGA=1), 2.5 V (PGA=0.5) or the supply (PGA=0.2)."
},
{
"number": "56",
"name": "P42/RTCOUT2/AIN1/SCL/KEY6/RTC_1S",
"type": "bidirectional",
"description": "VBAT-domain GPIO P42 with RTCOUT, SAR ADC input AIN1 (range as P41), I2C SCL, KEY6 and RTC_1S; it is not recommended to connect a battery here because it drives RTCOUT while VBAT alone is powered."
},
{
"number": "57",
"name": "P43/AIN0/SDA/KEYOUT",
"type": "bidirectional",
"description": "VBAT-domain GPIO P43 with SAR ADC input AIN0 (range as P41), I2C SDA and KEYOUT, which is a key-event power control output for external EEPROM."
},
{
"number": "58",
"name": "P50/AIN4/KEY6/RTC_OUT",
"type": "bidirectional",
"description": "VBAT-domain GPIO P50 with SAR ADC input AIN4 (range as P41), KEY6 and RTC_OUT."
},
{
"number": "59",
"name": "P51/AIN5/KEYOUT/RTC_1S",
"type": "bidirectional",
"description": "VBAT-domain GPIO P51 with SAR ADC input AIN5 (range as P41), KEYOUT and RTC_1S."
},
{
"number": "60",
"name": "UAN",
"type": "input",
"description": "Voltage channel A negative fully differential analog input; maximum differential peak is ±1000 mV at PGA=1."
},
{
"number": "61",
"name": "UAP",
"type": "input",
"description": "Voltage channel A positive fully differential analog input; maximum differential peak is ±1000 mV at PGA=1."
},
{
"number": "62",
"name": "AVSS3",
"type": "power_in",
"description": "Analog ground of the internal voltage reference."
},
{
"number": "63",
"name": "VREFA",
"type": "output",
"description": "ADC reference, typically 1.25 V; requires 0.1 µF and 1 µF external capacitors."
},
{
"number": "64",
"name": "LDO3",
"type": "power_out",
"description": "Metering ADC supply LDO, typically 3 V; requires 0.1 µF and 1 µF external capacitors."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Package not confirmed. The text never names LQFP-64 or gives 10x10 dimensions. Pages 24-29 contain a; MPN ambiguity. RN2025 is not a full orderable part number. The datasheet covers RN2025A64, B64 and C; Pin types are inferred, not printed. The table gives only pin function, not KiCad class. Analog inpu"
],
"pages_sent": 94,
"cost_usd": 0.4774,
"at": "2026-11-13T14:34:11"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/0573edd7c3d9a0de03fb8a5a613b0be3.pdf",
"pages": 301,
"sha256": "bae190d83688b304",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 64,
"described": 64,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "rn2025.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
12,
12,
1.5
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "b0c827bc5c05552175d28affe44a5bd2ab45c9c36efff6ff07a74cc449b13db4",
"checked": "2026-11-13",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "rn2025-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
12,
12,
1.5
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "2fa0f6a55c24370fde2ff5700818d9006edb7a246588b83bc6fdafad84d4558a",
"checked": "2026-11-13",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "LQFP64L (1010×1.4)",
"source_page": 300,
"D": {
"nom_mm": 10,
"range_mm": [
9.9,
10.1
]
},
"E1": {
"nom_mm": 10,
"range_mm": [
9.9,
10.1
]
},
"E": {
"nom_mm": 12,
"range_mm": [
11.8,
12.2
]
},
"e": {
"nom_mm": 0.5,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 1.6,
"range_mm": [
null,
1.6
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "rn2025.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
},
"metadata": {
"specs": {
"Manufacturer": "RENERGY",
"Package": "LQFP-64(10x10)",
"Category": "ADC/DAC/Data Conversion",
"Pins": "64"
},
"characteristics": {
"version": 1,
"source": "datasheet",
"datasheet_sha256": "bae190d83688b304f6ec2702f53fd7a6c52fca4c27ac45347aa15e4e05946314",
"rows": [
{
"name": "有功电能测量误差",
"symbol": "Err",
"kind": "tolerance",
"unit": "%",
"min": -0.1,
"typ": null,
"max": 0.1,
"conditions": "8000:1动态范围",
"source_page": 30,
"source": "datasheet"
},
{
"name": "无功电能测量误差",
"symbol": "Err",
"kind": "tolerance",
"unit": "%",
"min": -0.1,
"typ": null,
"max": 0.1,
"conditions": "8000:1动态范围",
"source_page": 30,
"source": "datasheet"
},
{
"name": "视在电能测量误差",
"symbol": "Err",
"kind": "tolerance",
"unit": "%",
"min": -0.1,
"typ": null,
"max": 0.1,
"conditions": "8000:1动态范围",
"source_page": 30,
"source": "datasheet"
},
{
"name": "有效值测量误差",
"symbol": "Err",
"kind": "tolerance",
"unit": "%",
"min": -0.2,
"typ": null,
"max": 0.2,
"conditions": "2000:1动态范围",
"source_page": 30,
"source": "datasheet"
},
{
"name": "功率测量误差",
"symbol": "Err",
"kind": "tolerance",
"unit": "%",
"min": -0.1,
"typ": null,
"max": 0.1,
"conditions": "2000:1动态范围",
"source_page": 30,
"source": "datasheet"
},
{
"name": "全失压电流测量误差",
"symbol": "",
"kind": "tolerance",
"unit": "%",
"min": -0.5,
"typ": null,
"max": 0.5,
"conditions": "400:1动态范围",
"source_page": 30,
"source": "datasheet"
},
{
"name": "最大信号电平(差分, PGA=1)",
"symbol": "Vxn",
"kind": "tolerance",
"unit": "mVp",
"min": -1000,
"typ": null,
"max": 1000,
"conditions": "PGA=1,差分信号",
"source_page": 30,
"source": "datasheet"
},
{
"name": "频率测量范围",
"symbol": "",
"kind": "electrical",
"unit": "Hz",
"min": 40,
"typ": null,
"max": 75,
"conditions": "",
"source_page": 30,
"source": "datasheet"
},
{
"name": "电能脉冲输出最大频率",
"symbol": "",
"kind": "electrical",
"unit": "KHz",
"min": null,
"typ": null,
"max": 20,
"conditions": "当脉宽低于 84ms 时",
"source_page": 30,
"source": "datasheet"
},
{
"name": "基准电压输出",
"symbol": "Vref",
"kind": "electrical",
"unit": "V",
"min": 1.25,
"typ": 1.26,
"max": 1.27,
"conditions": "VCC=3V~5.5V,温度范围:-40℃~+85℃",
"source_page": 30,
"source": "datasheet"
},
{
"name": "SAR ADC 输入范围",
"symbol": "SAR-IN",
"kind": "electrical",
"unit": "V",
"min": 0,
"typ": null,
"max": null,
"conditions": "最大值为 BGR(内部低功耗基准,典型值 1.25V)",
"source_page": 30,
"source": "datasheet"
},
{
"name": "低功耗比较器 LVD 阈值",
"symbol": "LVD",
"kind": "electrical",
"unit": "V",
"min": 2.3,
"typ": null,
"max": 4.9,
"conditions": "LVD 阈值可配置,2.3V 到 4.9V",
"source_page": 30,
"source": "datasheet"
},
{
"name": "低功耗比较器 CMP0 阈值 Vil1",
"symbol": "Vil1",
"kind": "electrical",
"unit": "V",
"min": 1.23,
"typ": 1.28,
"max": 1.33,
"conditions": "默认配置下比较器输出低电平的阈值",
"source_page": 30,
"source": "datasheet"
},
{
"name": "低功耗比较器 CMP0 阈值 Vil2",
"symbol": "Vil2",
"kind": "electrical",
"unit": "V",
"min": 0.8,
"typ": 0.84,
"max": 0.88,
"conditions": "选择0.9V档并且选择有迟滞时",
"source_page": 30,
"source": "datasheet"
},
{
"name": "VBAT 测量范围",
"symbol": "VBAT",
"kind": "electrical",
"unit": "V",
"min": 0,
"typ": 3.6,
"max": 5,
"conditions": "SAR ADC 对 VBAT 引脚电压的测量范围",
"source_page": 30,
"source": "datasheet"
},
{
"name": "输入高频时钟频率范围",
"symbol": "HOSI",
"kind": "electrical",
"unit": "Mhz",
"min": 4.096,
"typ": 16.384,
"max": 32.768,
"conditions": "",
"source_page": 31,
"source": "datasheet"
},
{
"name": "内部PLL时钟频率范围",
"symbol": "PLL",
"kind": "electrical",
"unit": "MHz",
"min": 8.192,
"typ": null,
"max": 16.384,
"conditions": "fosc=32.768Khz",
"source_page": 31,
"source": "datasheet"
},
{
"name": "内部高频RCH(常温)",
"symbol": "RCH",
"kind": "electrical",
"unit": "MHz",
"min": 3,
"typ": 3.2,
"max": 3.85,
"conditions": "常温,用于芯片复位后默认",
"source_page": 31,
"source": "datasheet"
},
{
"name": "内部低频RCL",
"symbol": "RCL",
"kind": "electrical",
"unit": "KHz",
"min": 20,
"typ": 32,
"max": 40,
"conditions": "用于WDT时钟",
"source_page": 32,
"source": "datasheet"
},
{
"name": "主电源 VCC",
"symbol": "VCC",
"kind": "recommended_operating",
"unit": "V",
"min": 2.4,
"typ": null,
"max": 5.5,
"conditions": "建议主电源选择为3.3V±5%或者5V±5%",
"source_page": 32,
"source": "datasheet"
},
{
"name": "CPU 最低工作电压",
"symbol": "Vil",
"kind": "electrical",
"unit": "V",
"min": 1.8,
"typ": 1.9,
"max": 2,
"conditions": "全温度范围",
"source_page": 32,
"source": "datasheet"
},
{
"name": "VBAT 供电电压 VBAT1",
"symbol": "VBAT1",
"kind": "recommended_operating",
"unit": "V",
"min": 2.5,
"typ": 3.6,
"max": 5.5,
"conditions": "RTC 温补电路正常工作,RTC 精度保证的电压工作范围",
"source_page": 32,
"source": "datasheet"
},
{
"name": "VBAT 供电电压 VBAT2",
"symbol": "VBAT2",
"kind": "recommended_operating",
"unit": "V",
"min": 1.8,
"typ": 3.6,
"max": 5.5,
"conditions": "RTC 万年历翻转正常,温补电路不保证",
"source_page": 32,
"source": "datasheet"
},
{
"name": "VBAT 供电功耗(典型)",
"symbol": "SIdd",
"kind": "electrical",
"unit": "μA",
"min": null,
"typ": 1.5,
"max": null,
"conditions": "典型条件:Vbat=3.6V;Tc=25度",
"source_page": 32,
"source": "datasheet"
},
{
"name": "VBAT 供电功耗(极限)",
"symbol": "SIdd",
"kind": "electrical",
"unit": "μA",
"min": null,
"typ": null,
"max": 2,
"conditions": "极限条件:Vbat=3.6V;Tc=85度",
"source_page": 32,
"source": "datasheet"
},
{
"name": "LDO18 内核电压",
"symbol": "V1P8",
"kind": "electrical",
"unit": "V",
"min": 1.62,
"typ": 1.8,
"max": 1.98,
"conditions": "CPU 内核电压",
"source_page": 32,
"source": "datasheet"
},
{
"name": "LDO3 Σ-ΔADC 电压",
"symbol": "V3",
"kind": "electrical",
"unit": "V",
"min": 2.85,
"typ": 2.9,
"max": 2.95,
"conditions": "Σ-ΔADC 电压",
"source_page": 32,
"source": "datasheet"
},
{
"name": "LDO_VBAT VBAT域数字电压",
"symbol": "V2",
"kind": "electrical",
"unit": "V",
"min": 1.9,
"typ": 2,
"max": 2.2,
"conditions": "VBAT 域数字电压",
"source_page": 32,
"source": "datasheet"
},
{
"name": "主电电压",
"symbol": "Vvcc",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 7,
"conditions": "",
"source_page": 32,
"source": "datasheet"
},
{
"name": "电池输入电压",
"symbol": "Vvbat",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 7,
"conditions": "",
"source_page": 32,
"source": "datasheet"
},
{
"name": "DVDD to DGND",
"symbol": "",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 7,
"conditions": "",
"source_page": 32,
"source": "datasheet"
},
{
"name": "DVDD to AVDD",
"symbol": "",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 0.3,
"conditions": "",
"source_page": 32,
"source": "datasheet"
},
{
"name": "电流输入引脚电压",
"symbol": "IAP,IAN,IBP,IBN,ICP,ICN,INP,INN",
"kind": "absolute_maximum",
"unit": "V",
"min": -6,
"typ": null,
"max": 6,
"conditions": "",
"source_page": 32,
"source": "datasheet"
},
{
"name": "电压输入引脚电压",
"symbol": "VAP,VAN,VBP,VBN,VCP,VCN",
"kind": "absolute_maximum",
"unit": "V",
"min": -6,
"typ": null,
"max": 6,
"conditions": "",
"source_page": 32,
"source": "datasheet"
},
{
"name": "数字IO输出低电平",
"symbol": "VOL",
"kind": "electrical",
"unit": "V",
"min": -0.3,
"typ": null,
"max": null,
"conditions": "",
"source_page": 33,
"source": "datasheet"
},
{
"name": "模拟输入电压(相对AGND)",
"symbol": "VINA",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": null,
"conditions": "相对于 AGND;上限为 AVDD+0.3(表中为表达式)",
"source_page": 33,
"source": "datasheet"
},
{
"name": "工作温度范围",
"symbol": "TA",
"kind": "recommended_operating",
"unit": "℃",
"min": -40,
"typ": null,
"max": 85,
"conditions": "",
"source_page": 33,
"source": "datasheet"
},
{
"name": "存储温度范围",
"symbol": "Tstg",
"kind": "absolute_maximum",
"unit": "℃",
"min": -65,
"typ": null,
"max": 150,
"conditions": "",
"source_page": 33,
"source": "datasheet"
},
{
"name": "ESD 人体模型 HBM",
"symbol": "ESD",
"kind": "absolute_maximum",
"unit": "V",
"min": null,
"typ": null,
"max": 4000,
"conditions": "HBM,JEDEC EIA/JESD22-A114,所有引脚",
"source_page": 33,
"source": "datasheet"
},
{
"name": "ESD 机械模型 MM",
"symbol": "ESD",
"kind": "absolute_maximum",
"unit": "V",
"min": null,
"typ": null,
"max": 200,
"conditions": "MM,JEDEC EIA/JESD22-A115C,所有引脚",
"source_page": 33,
"source": "datasheet"
},
{
"name": "ESD 充电器件模型 CDM",
"symbol": "ESD",
"kind": "absolute_maximum",
"unit": "V",
"min": null,
"typ": null,
"max": 500,
"conditions": "CDM,JEDEC EIA/JESD22-C101F,所有引脚",
"source_page": 33,
"source": "datasheet"
},
{
"name": "闩锁试验 Latch-up",
"symbol": "LatchUp",
"kind": "absolute_maximum",
"unit": "mA",
"min": null,
"typ": null,
"max": 200,
"conditions": "JEDEC STANDARD NO.78D NOVEMBER 2011,所有引脚",
"source_page": 33,
"source": "datasheet"
}
]
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"rn2025"
],
"discovery_pitch": "RN2025 (RENERGY) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"rn2025.kicad_sym",
"rn2025.kicad_mod",
"rn2025.glb",
"rn2025.step",
"rn2025.lbr",
"docs/hero.png",
"docs/rn2025-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"rn2025-hero.glb",
"rn2025-hero.overlay.json"
],
"visibility": {
"public": true
}
}