main
Ray
rm1201aso8e: the pins were read twice by one model (sonnet); say so instead of 'cross-checked by two models'
46df170
RM1201ASO8E
Realmagic · Microcontroller Units (MCUs/MPUs/SOCs) · SOP-8
RM1201ASO8E from Realmagic, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, read twice and the reads agreed); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TK0/PCL/PA0 | bidirectional | PA0 is a PORTA I/O with programmable pull-up/pull-down and level-change interrupt, also serving as the PCL serial programming/debug clock input and the touch key channel 0 (TK0) analog input. |
| 2 | PWM0/TK1/PDA/PA1 | bidirectional | PA1 is a PORTA I/O with programmable pull-up/pull-down and level-change interrupt, also serving as the PDA serial programming/debug data I/O, the touch key channel 1 (TK1) input and the PWM0 output. |
| 3 | T0/PWM1/TK2/PA2 | bidirectional | PA2 is a PORTA I/O with programmable pull-up/pull-down and level-change interrupt, also serving as the touch key channel 2 (TK2) input, the PWM1 output and the Timer0 external input counting clock (T0). |
| 4 | [PWM0]/TK3/PA4 | bidirectional | PA4 is a PORTA I/O with programmable pull-up/pull-down and level-change interrupt, also serving as the touch key channel 3 (TK3) input and the PWM0 output, with configurable source current of 3/6/18/24 mA at VDD=5V. |
| 5 | PA3/RSTN/VPP/[PWM1] | bidirectional | PA3 is a PORTA I/O that is a true open-drain output when set as output, also serving as the active-low hardware reset input RSTN (configurable internal pull-up), the VPP programming voltage pin and an open-drain PWM1 output that needs an external pull-up resistor. |
| 6 | PA5/[TK2] | bidirectional | PA5 is a PORTA I/O with programmable pull-up/pull-down and level-change interrupt, also usable as the touch key channel 2 (TK2) input, with configurable source current of 3/6/18/24 mA at VDD=5V. |
| 7 | VSS | power_in | Ground. |
| 8 | VDD | power_in | Power supply, 1.8 V to 5.5 V (2.5 V to 5.5 V for system frequency up to 4 MHz), absolute maximum -0.3 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Realmagic |
| Package | SOP-8 |
| Category | Embedded Processors & Controllers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating temperature | TON | -40 | 85 | ℃ | 11 | ||
| Storage temperature | TOFF | -40 | 125 | ℃ | 11 | ||
| Operating voltage | VDD | -0.3 | 5.5 | V | 11 | ||
| I/O input voltage | VI | -0.3 | V | 所有 I/O 口; 上限印刷为 VDD + 0.3 V | 11 | ||
| I/O output voltage | VO | -0.3 | V | 所有输出口; 上限印刷为 VDD + 0.3 V | 11 | ||
| I/O output current IOH | IOH | 25 | mA | 单个 I/O 口工作时 | 11 | ||
| I/O output current IOH (all ports) | IOH | 100 | mA | 所有 I/O 口工作时 | 11 | ||
| I/O input current IOL | IOL | 25 | mA | 单个 I/O 口工作时 | 11 | ||
| I/O input current IOL (all ports) | IOL | 100 | mA | 所有 I/O 口工作时 | 11 | ||
| Operating voltage (system frequency <= 2MHz) | VDD | 1.8 | 5.5 | V | 系统频率 <= 2MHz | 12 | |
| Operating voltage (system frequency <= 4MHz) | VDD | 2.5 | 5.5 | V | 系统频率 <= 4MHz | 12 | |
| IO high leakage current | ILIH | 1 | uA | 所有输入口 VIO = VDD | 12 | ||
| IO low leakage current | ILIL | 1 | uA | 所有输入口 VIO = 0V | 12 | ||
| Internal 8MHz HIRC center frequency | FHIRC | 8 | MHz | 中心频率 | 13 | ||
| HIRC calibrated frequency tolerance | FHIRC | -1 | 1 | % | TA = 25 ℃, VDD = 5V | 13 | |
| HIRC calibrated frequency tolerance (wide) | FHIRC | -3 | 3 | % | TA = -40 |
13 | |
| Internal 32KHz LIRC center frequency | FLIRC | 32 | KHz | 中心频率 | 13 | ||
| LIRC calibrated frequency tolerance | FLIRC | -10 | 10 | % | TA = 25 ℃, VDD =2.5V~5.5V | 13 | |
| LIRC calibrated frequency tolerance (wide) | FLIRC | -40 | 40 | % | TA =-40 |
13 | |
| IO source current (PA0~PA2) | IOH1 | 18 | mA | VDD = 5V, VIO=0.9VDD | 12 | ||
| IO source current (PA4/PA5 configurable) | IOH2 | 3 | mA | VDD = 5V, VIO=0.9VDD | 12 | ||
| IO source current (PA4/PA5 configurable) | IOH3 | 6 | mA | VDD = 5V, VIO=0.9VDD | 12 | ||
| IO source current (PA4/PA5 configurable) | IOH4 | 18 | mA | VDD = 5V, VIO=0.9VDD | 12 | ||
| IO source current (PA4/PA5 configurable) | IOH5 | 24 | mA | VDD = 5V, VIO=0.9VDD | 12 | ||
| IO sink current | IOL | 40 | mA | VDD =5V,VIO=0.1VDD | 12 | ||
| IO pull-up resistance | RPU | 22 | kΩ | VDD =5V,VIO = 0V | 12 | ||
| IO pull-up resistance (PA3) | RPU1 | 50 | kΩ | PA3 | 12 | ||
| IO pull-down resistance | RPD | 5 | kΩ | VDD =5V,VIO = 0V | 12 | ||
| Operating current (CPUCLK=4MHz) | IDD1 | 1.3 | mA | 工作, CPUCLK=4MHz, VDD=5V | 12 | ||
| Operating current (CPUCLK=2MHz) | IDD1 | 900 | uA | 工作, CPUCLK=2MHz | 12 | ||
| Operating current (CPUCLK=32KHz) | IDD1 | 10 | uA | 工作, CPUCLK=32KHz | 12 | ||
| Idle current (CPUCLK=4MHz) | IDD2 | 300 | uA | 空闲, CPUCLK=4MHz, VDD=5V | 12 | ||
| Idle current (CPUCLK=2MHz) | IDD2 | 200 | uA | 空闲, CPUCLK=2MHz | 12 | ||
| Idle current (CPUCLK=32KHz) | IDD2 | 5 | uA | 空闲, CPUCLK=32KHz | 12 | ||
| Sleep current | IDD3 | 0.8 | uA | 休眠, VDD = 3.3V (禁止 BOR) | 12 | ||
| Sleep current | IDD3 | 30 | uA | 休眠, VDD = 3.3V (使能 BOR) | 12 | ||
| Sleep current | IDD3 | 1.1 | uA | 休眠, VDD = 5V (禁止 BOR) | 12 | ||
| Sleep current | IDD3 | 55 | uA | 休眠, VDD = 5V (使能 BOR) | 12 |
CAD (KiCad official)
- Symbol:
RM1201ASO8E - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
rm1201aso8e-etched.step/rm1201aso8e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rm1201aso8e.step/rm1201aso8e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Realmagic datasheet (20 pp, sha256
2c80a7287dadbb0e, retrieved 2026-11-07, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# RM1201ASO8E
**Realmagic** · Microcontroller Units (MCUs/MPUs/SOCs) · SOP-8
RM1201ASO8E from Realmagic, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, read twice and the reads agreed); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TK0/PCL/PA0 | bidirectional | PA0 is a PORTA I/O with programmable pull-up/pull-down and level-change interrupt, also serving as the PCL serial programming/debug clock input and the touch key channel 0 (TK0) analog input. |
| 2 | PWM0/TK1/PDA/PA1 | bidirectional | PA1 is a PORTA I/O with programmable pull-up/pull-down and level-change interrupt, also serving as the PDA serial programming/debug data I/O, the touch key channel 1 (TK1) input and the PWM0 output. |
| 3 | T0/PWM1/TK2/PA2 | bidirectional | PA2 is a PORTA I/O with programmable pull-up/pull-down and level-change interrupt, also serving as the touch key channel 2 (TK2) input, the PWM1 output and the Timer0 external input counting clock (T0). |
| 4 | [PWM0]/TK3/PA4 | bidirectional | PA4 is a PORTA I/O with programmable pull-up/pull-down and level-change interrupt, also serving as the touch key channel 3 (TK3) input and the PWM0 output, with configurable source current of 3/6/18/24 mA at VDD=5V. |
| 5 | PA3/RSTN/VPP/[PWM1] | bidirectional | PA3 is a PORTA I/O that is a true open-drain output when set as output, also serving as the active-low hardware reset input RSTN (configurable internal pull-up), the VPP programming voltage pin and an open-drain PWM1 output that needs an external pull-up resistor. |
| 6 | PA5/[TK2] | bidirectional | PA5 is a PORTA I/O with programmable pull-up/pull-down and level-change interrupt, also usable as the touch key channel 2 (TK2) input, with configurable source current of 3/6/18/24 mA at VDD=5V. |
| 7 | VSS | power_in | Ground. |
| 8 | VDD | power_in | Power supply, 1.8 V to 5.5 V (2.5 V to 5.5 V for system frequency up to 4 MHz), absolute maximum -0.3 V to 5.5 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Realmagic |
| Package | SOP-8 |
| Category | Embedded Processors & Controllers |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating temperature | TON | -40 | | 85 | ℃ | | 11 |
| Storage temperature | TOFF | -40 | | 125 | ℃ | | 11 |
| Operating voltage | VDD | -0.3 | | 5.5 | V | | 11 |
| I/O input voltage | VI | -0.3 | | | V | 所有 I/O 口; 上限印刷为 VDD + 0.3 V | 11 |
| I/O output voltage | VO | -0.3 | | | V | 所有输出口; 上限印刷为 VDD + 0.3 V | 11 |
| I/O output current IOH | IOH | | | 25 | mA | 单个 I/O 口工作时 | 11 |
| I/O output current IOH (all ports) | IOH | | | 100 | mA | 所有 I/O 口工作时 | 11 |
| I/O input current IOL | IOL | | | 25 | mA | 单个 I/O 口工作时 | 11 |
| I/O input current IOL (all ports) | IOL | | | 100 | mA | 所有 I/O 口工作时 | 11 |
| Operating voltage (system frequency <= 2MHz) | VDD | 1.8 | | 5.5 | V | 系统频率 <= 2MHz | 12 |
| Operating voltage (system frequency <= 4MHz) | VDD | 2.5 | | 5.5 | V | 系统频率 <= 4MHz | 12 |
| IO high leakage current | ILIH | | | 1 | uA | 所有输入口 VIO = VDD | 12 |
| IO low leakage current | ILIL | | | 1 | uA | 所有输入口 VIO = 0V | 12 |
| Internal 8MHz HIRC center frequency | FHIRC | | 8 | | MHz | 中心频率 | 13 |
| HIRC calibrated frequency tolerance | FHIRC | -1 | | 1 | % | TA = 25 ℃, VDD = 5V | 13 |
| HIRC calibrated frequency tolerance (wide) | FHIRC | -3 | | 3 | % | TA = -40~85℃, VDD = 2.5V~5.5V | 13 |
| Internal 32KHz LIRC center frequency | FLIRC | | 32 | | KHz | 中心频率 | 13 |
| LIRC calibrated frequency tolerance | FLIRC | -10 | | 10 | % | TA = 25 ℃, VDD =2.5V~5.5V | 13 |
| LIRC calibrated frequency tolerance (wide) | FLIRC | -40 | | 40 | % | TA =-40~85℃, VDD=2.5V~5.5V | 13 |
| IO source current (PA0~PA2) | IOH1 | | 18 | | mA | VDD = 5V, VIO=0.9VDD | 12 |
| IO source current (PA4/PA5 configurable) | IOH2 | | 3 | | mA | VDD = 5V, VIO=0.9VDD | 12 |
| IO source current (PA4/PA5 configurable) | IOH3 | | 6 | | mA | VDD = 5V, VIO=0.9VDD | 12 |
| IO source current (PA4/PA5 configurable) | IOH4 | | 18 | | mA | VDD = 5V, VIO=0.9VDD | 12 |
| IO source current (PA4/PA5 configurable) | IOH5 | | 24 | | mA | VDD = 5V, VIO=0.9VDD | 12 |
| IO sink current | IOL | | 40 | | mA | VDD =5V,VIO=0.1VDD | 12 |
| IO pull-up resistance | RPU | | 22 | | kΩ | VDD =5V,VIO = 0V | 12 |
| IO pull-up resistance (PA3) | RPU1 | | 50 | | kΩ | PA3 | 12 |
| IO pull-down resistance | RPD | | 5 | | kΩ | VDD =5V,VIO = 0V | 12 |
| Operating current (CPUCLK=4MHz) | IDD1 | | 1.3 | | mA | 工作, CPUCLK=4MHz, VDD=5V | 12 |
| Operating current (CPUCLK=2MHz) | IDD1 | | 900 | | uA | 工作, CPUCLK=2MHz | 12 |
| Operating current (CPUCLK=32KHz) | IDD1 | | 10 | | uA | 工作, CPUCLK=32KHz | 12 |
| Idle current (CPUCLK=4MHz) | IDD2 | | 300 | | uA | 空闲, CPUCLK=4MHz, VDD=5V | 12 |
| Idle current (CPUCLK=2MHz) | IDD2 | | 200 | | uA | 空闲, CPUCLK=2MHz | 12 |
| Idle current (CPUCLK=32KHz) | IDD2 | | 5 | | uA | 空闲, CPUCLK=32KHz | 12 |
| Sleep current | IDD3 | | 0.8 | | uA | 休眠, VDD = 3.3V (禁止 BOR) | 12 |
| Sleep current | IDD3 | | 30 | | uA | 休眠, VDD = 3.3V (使能 BOR) | 12 |
| Sleep current | IDD3 | | 1.1 | | uA | 休眠, VDD = 5V (禁止 BOR) | 12 |
| Sleep current | IDD3 | | 55 | | uA | 休眠, VDD = 5V (使能 BOR) | 12 |
## CAD (KiCad official)
- Symbol: `RM1201ASO8E`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `rm1201aso8e-etched.step` / `rm1201aso8e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `rm1201aso8e.step` / `rm1201aso8e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Realmagic datasheet](docs/rm1201aso8e-datasheet.pdf) (20 pp, sha256 `2c80a7287dadbb0e`, retrieved 2026-11-07, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/rm1201aso8e-datasheet.pdf)