3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownRM1201ASO8B
Realmagic · Microcontroller Units (MCUs/MPUs/SOCs) · SOP-8
RM1201ASO8B from Realmagic, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, read twice and the reads agreed); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | T0/PWM1/TK2/PA2 | bidirectional | PORTA I/O PA2 with programmable pull-up/pull-down and level-change interrupt, also touch key channel 2 input (TK2), PWM1 output and Timer0 external input counting clock (T0). |
| 2 | [TK2]/PA5 | bidirectional | PORTA I/O PA5 with programmable pull-up/pull-down and level-change interrupt, with alternate touch key channel 2 input (TK2) and a configurable high-drive output (3/6/18/24 mA source) able to drive LEDs directly. |
| 3 | [PWM1]/VPP/RSTN/PA3 | bidirectional | PORTA I/O PA3 (true open-drain when set as output) that also serves as active-low hardware reset RSTN with configurable internal pull-up, programming voltage VPP, and open-drain PWM1 output needing an external pull-up resistor. |
| 4 | VSS | power_in | Ground. |
| 5 | PA4/TK3/[PWM0] | bidirectional | PORTA I/O PA4 with programmable pull-up/pull-down and level-change interrupt, also touch key channel 3 input (TK3) and PWM0 output, with configurable high-drive output (3/6/18/24 mA source) able to drive LEDs directly. |
| 6 | VDD | power_in | Power supply, 1.8 V to 5.5 V operating (2.5 V to 5.5 V at system frequency up to 4 MHz), absolute maximum 5.5 V. |
| 7 | PA1/PDA/TK1/PWM0 | bidirectional | PORTA I/O PA1 with programmable pull-up/pull-down and level-change interrupt, also serial programming/debug data I/O (PDA), touch key channel 1 input (TK1) and PWM0 output. |
| 8 | PA0/PCL/TK0 | bidirectional | PORTA I/O PA0 with programmable pull-up/pull-down and level-change interrupt, also serial programming/debug clock input (PCL) and touch key channel 0 input (TK0). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Realmagic |
| Package | SOP-8 |
| Category | Embedded Processors & Controllers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating temperature | TON | -40 | 85 | ℃ | 11 | ||
| Storage temperature | TOFF | -40 | 125 | ℃ | 11 | ||
| Operating voltage (absolute maximum) | VDD | -0.3 | 5.5 | V | 11 | ||
| I/O input voltage | VI | -0.3 | V | 所有 I/O 口 | 11 | ||
| I/O output voltage | VO | -0.3 | V | 所有输出口 | 11 | ||
| I/O output current IOH (single I/O) | IOH | 25 | mA | 单个 I/O 口工作时 | 11 | ||
| I/O output current IOH (all I/O) | IOH | 100 | mA | 所有 I/O 口工作时 | 11 | ||
| I/O input current IOL (single I/O) | IOL | 25 | mA | 单个 I/O 口工作时 | 11 | ||
| I/O input current IOL (all I/O) | IOL | 100 | mA | 所有 I/O 口工作时 | 11 | ||
| Operating voltage VDD (system frequency up to 2 MHz) | VDD | 1.8 | 5.5 | V | 系统频率 <= 2MHz | 12 | |
| Operating voltage VDD (system frequency up to 4 MHz) | VDD | 2.5 | 5.5 | V | 系统频率 <= 4MHz | 12 | |
| IO high-level input leakage current | ILIH | 1 | uA | 所有输入口 VIO = VDD | 12 | ||
| IO low-level input leakage current | ILIL | 1 | uA | 所有输入口 VIO = 0V | 12 | ||
| Calibrated internal 8 MHz HIRC frequency (TA = 25 C) | FHIRC | -1 | 1 | % | TA = 25 ℃, VDD = 5V | 13 | |
| Calibrated internal 8 MHz HIRC frequency (TA = -40 to 85 C) | FHIRC | -3 | 3 | % | TA =-40 |
13 | |
| Calibrated internal 32 KHz LIRC frequency (TA = 25 C) | FLIRC | -10 | 10 | % | TA = 25 ℃, VDD =2.5V~5.5V | 13 | |
| Calibrated internal 32 KHz LIRC frequency (TA = -40 to 85 C) | FLIRC | -40 | 40 | % | TA =-40 |
13 | |
| IO source current IOH1 (PA0~PA2) | IOH1 | 18 | mA | VDD = 5V,VIO=0.9VDD | 12 | ||
| IO source current IOH2 (PA4/PA5 configurable) | IOH2 | 3 | mA | 12 | |||
| IO source current IOH3 (PA4/PA5 configurable) | IOH3 | 6 | mA | 12 | |||
| IO source current IOH4 (PA4/PA5 configurable) | IOH4 | 18 | mA | 12 | |||
| IO source current IOH5 (PA4/PA5 configurable) | IOH5 | 24 | mA | 12 | |||
| IO sink current IOL (PA0~PA5) | IOL | 40 | mA | VDD =5V,VIO=0.1VDD | 12 | ||
| IO pull-up resistor RPU (PA0~PA2, PA4, PA5) | RPU | 22 | kΩ | VDD =5V,VIO = 0V | 12 | ||
| IO pull-up resistor RPU1 (PA3) | RPU1 | 50 | kΩ | 12 | |||
| IO pull-down resistor RPD (all IO) | RPD | 5 | kΩ | VDD =5V,VIO = 0V | 12 | ||
| Operating current IDD1 (CPUCLK 4 MHz) | IDD1 | 1.3 | mA | CPUCLK=4MHz VDD=5V | 12 | ||
| Operating current IDD1 (CPUCLK 2 MHz) | IDD1 | 900 | uA | CPUCLK=2MHz | 12 | ||
| Operating current IDD1 (CPUCLK 32 KHz) | IDD1 | 10 | uA | CPUCLK=32KHz | 12 | ||
| Idle current IDD2 (CPUCLK 4 MHz) | IDD2 | 300 | uA | CPUCLK=4MHz VDD=5V | 12 | ||
| Idle current IDD2 (CPUCLK 2 MHz) | IDD2 | 200 | uA | CPUCLK=2MHz | 12 | ||
| Idle current IDD2 (CPUCLK 32 KHz) | IDD2 | 5 | uA | CPUCLK=32KHz | 12 | ||
| Sleep current IDD3 (BOR disabled) | IDD3 | 0.8 | uA | VDD = 3.3V (禁止 BOR) | 12 | ||
| Sleep current IDD3 (BOR enabled) | IDD3 | 30 | uA | VDD = 3.3V (使能 BOR) | 12 | ||
| Sleep current IDD3 (BOR disabled) | IDD3 | 1.1 | uA | VDD = 5V (禁止 BOR) | 12 | ||
| Sleep current IDD3 (BOR enabled) | IDD3 | 55 | uA | VDD = 5V (使能 BOR) | 12 | ||
| Low-voltage reset voltage VBOR (grade 1.8V) | VBOR | 1.8 | V | 13 | |||
| Low-voltage reset voltage VBOR (grade 2.0V) | VBOR | 1.9 | V | 13 | |||
| Low-voltage reset voltage VBOR (grade 2.2V) | VBOR | 2.3 | V | 13 | |||
| Low-voltage reset voltage VBOR (grade 2.5V) | VBOR | 2.8 | V | 13 | |||
| Low-voltage reset voltage VBOR (grade 2.7V) | VBOR | 3 | V | 13 | |||
| Low-voltage reset voltage VBOR (grade 3.0V) | VBOR | 3.3 | V | 13 | |||
| Low-voltage reset voltage VBOR (grade 3.5V) | VBOR | 3.6 | V | 13 | |||
| Low-voltage reset voltage VBOR (grade 4.0V) | VBOR | 4 | V | 13 | |||
| Brown-out detection voltage VBOD (grade 1.8V) | VBOD | 1.8 | V | 14 | |||
| Brown-out detection voltage VBOD (grade 1.9V) | VBOD | 1.9 | V | 14 | |||
| Brown-out detection voltage VBOD (grade 2.0V) | VBOD | 2 | V | 14 | |||
| Brown-out detection voltage VBOD (grade 2.1V) | VBOD | 2.1 | V | 14 | |||
| Brown-out detection voltage VBOD (grade 2.2V) | VBOD | 2.2 | V | 14 | |||
| Brown-out detection voltage VBOD (grade 2.3V) | VBOD | 2.3 | V | 14 | |||
| Brown-out detection voltage VBOD (grade 2.4V) | VBOD | 2.4 | V | 14 | |||
| Brown-out detection voltage VBOD (grade 2.5V) | VBOD | 2.5 | V | 14 | |||
| Brown-out detection voltage VBOD (grade 2.75V) | VBOD | 2.75 | V | 14 | |||
| Brown-out detection voltage VBOD (grade 3.0V) | VBOD | 3 | V | 14 | |||
| Brown-out detection voltage VBOD (grade 3.15V) | VBOD | 3.15 | V | 14 | |||
| Brown-out detection voltage VBOD (grade 3.3V) | VBOD | 3.3 | V | 14 | |||
| Brown-out detection voltage VBOD (grade 3.5V) | VBOD | 3.5 | V | 14 | |||
| Brown-out detection voltage VBOD (grade 3.75V) | VBOD | 3.75 | V | 14 | |||
| Brown-out detection voltage VBOD (grade 4.0V) | VBOD | 4 | V | 14 | |||
| Brown-out detection voltage VBOD (grade 4.5V) | VBOD | 4.5 | V | 14 |
CAD (KiCad official)
- Symbol:
RM1201ASO8B - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
rm1201aso8b-etched.step/rm1201aso8b-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rm1201aso8b.step/rm1201aso8b.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Realmagic datasheet (20 pp, sha256
2c80a7287dadbb0e, retrieved 2026-11-07, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).