component
RLP25FEER680
Public Made by Adomby adom
TA-I Tech Current Sense Resistors / Shunt Resistors, 2512. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownRLP25FEER680
TA-I Tech · Current Sense Resistors / Shunt Resistors · 2512
RLP25FEER680 from TA-I Tech, in a 2512. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | First Ni/Sn-plated metal-alloy-plate terminal of the two-terminal current sense resistor (RLP25, 6.4 x 3.2 mm body), with a recommended 4.0 mm pad width and a sensing trace branching off the Cu pad. |
| 2 | 2 | passive | Second Ni/Sn-plated metal-alloy-plate terminal of the two-terminal current sense resistor, interchangeable with the first because the part is non-polar, with the same recommended pad and sensing trace layout. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TA-I Tech |
| Package | 2512 |
| Category | Resistors |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Resistance Value (type range RLP25) | R | 1 | 70 | mΩ | 1 | ||
| Tolerance | -1 | 1 | % | Tolerance code F (±1%) from part-numbering table | 1 | ||
| Temperature Coefficient of Resistance | TCR | -50 | 50 | ppm/℃ | 1 | ||
| Insulation Resistance | 100 | MΩ | 1 | ||||
| Operation Temperature Range | -55 | 170 | ℃ | 1 | |||
| Storage Temperature | 5 | 35 | ℃ | Storage conditions | 7 | ||
| Storage Humidity | 40 | 75 | % | Storage conditions | 7 | ||
| High Temperature Exposure (Storage) resistance change | ΔR/R | -1 | 1 | % | T=170℃, 1000 hrs, measured 24 hrs after test conclusion | 3 | |
| Temperature Cycling resistance change | ΔR/R | -0.5 | 0.5 | % | 1000 cycles (-55℃ to 125℃), measured 24 hrs after test conclusion | 3 | |
| Short Time Overload resistance change | ΔR/R | -0.5 | 0.5 | % | 5 X rated power for 5 s | 3 | |
| Moisture Resistance resistance change | ΔR/R | -1 | 1 | % | 24 hours per cycle, 10 cycles, unpowered | 3 | |
| Biased Humidity resistance change | ΔR/R | -0.5 | 0.5 | % | 10% rated power at 85℃, RH 85%, 1000 Hrs, measured 24 hrs after test conclusion | 3 | |
| Operation Life resistance change | ΔR/R | -1 | 1 | % | 1000 hours TA=125°C at 45% rated power, measured at 24±4 hours after test conclusion | 3 | |
| Resistance to Soldering Heat resistance change | ΔR/R | -0.5 | 0.5 | % | T=260±5℃ solder, 10±1 sec dwell | 3 | |
| Mechanical Shock resistance change | ΔR/R | -0.5 | 0.5 | % | 100 g's, normal duration 6 ms, half sine shock pulse | 3 | |
| Resistance to Vibration resistance change | ΔR/R | -0.5 | 0.5 | % | 5 g's for 20 min, 12 cycles, 10-2000 Hz | 3 | |
| Board Flex resistance change | ΔR/R | -0.5 | 0.5 | % | Min 2 mm deflection, 60 sec | 3 | |
| Thermal Shock resistance change | ΔR/R | -1 | 1 | % | -55℃/+155℃, 300 cycles, max transfer time 20 s, dwell 15 min, air-air | 4 | |
| ESD resistance change | ΔR/R | -1 | 1 | % | Verify voltage setting at 500V | 4 | |
| Terminal Strength (SMD) resistance change | ΔR/R | -1 | 1 | % | Force of 1.8 kg for 60 seconds | 4 | |
| Rated Power (power rating code E) | P | 2 | W | Power rating code E = 2W from part-numbering table | 1 |
CAD (KiCad official)
- Symbol:
RLP25FEER680 - Footprint:
Resistor_SMD:R_2512_6332Metric - 3D model: 2512 (KiCad packages3D, STEP)
- 3D model files:
rlp25feer680-etched.step/rlp25feer680-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rlp25feer680.step/rlp25feer680.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TA-I Tech datasheet (10 pp, sha256
5e15a379bbda9f7d, retrieved 2026-11-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).