component
RK805-2
Public Made by Adomby adom
Rockchip Power Management - Specialized, QFN-32-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 13d ago |
| viewers | 13d ago |
| package.json | 13d ago |
| page.json | 13d ago |
| README.md | 13d ago |
| rk805-2-etched.glb | 13d ago |
| rk805-2-etched.step | 13d ago |
| rk805-2-hero.glb | 13d ago |
| rk805-2-hero.overlay.json | 13d ago |
| rk805-2.glb | 13d ago |
| rk805-2.kicad_mod | 13d ago |
| rk805-2.kicad_sym | 13d ago |
| rk805-2.lbr | 13d ago |
| rk805-2.step | 13d ago |
RK805-2
Rockchip · Power Management - Specialized · QFN-32-EP(4x4)
RK805-2 from Rockchip, in a QFN-32-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Power on or power off enable pin, active high, with an internal 800k resistor pulled low to ground. |
| 2 | SLEEP | input | Sleep mode control input. |
| 3 | LDO1 | power_out | LDO1 regulator output, adjustable 0.8 V to 3.4 V in 100 mV steps, rated 300 mA with VCC5=5 V. |
| 4 | VCC5 | power_in | Power supply of LDO1/LDO2, input range 2.0 V to 5.5 V. |
| 5 | LDO2 | power_out | LDO2 regulator output, adjustable 0.8 V to 3.4 V in 100 mV steps, rated 300 mA with VCC5=5 V. |
| 6 | INT | output | Interrupt request pin, open drain; absolute maximum voltage on this pin is 4 V. |
| 7 | SCL | input | I2C clock input (7-bit slave address 0011000, up to 1 MHz SCL clock frequency). |
| 8 | SDA | bidirectional | I2C data input and output. |
| 9 | RESETB | input | Reset pin after power on, active low; absolute maximum voltage on this pin is 4 V. |
| 10 | FB2 | input | Output feedback voltage of buck2, adjustable 0.7125 V to 2.300 V. |
| 11 | SW2 | output | Switching node of buck2; rated output current 2.5 A. |
| 12 | VCC2 | power_in | Power supply of buck2, input range 2.7 V to 5.5 V. |
| 13 | VCC1 | power_in | Power supply of buck1, input range 2.7 V to 5.5 V. |
| 14 | SW1 | output | Switching node of buck1; rated output current 2.5 A. |
| 15 | FB1 | input | Output feedback voltage of buck1, adjustable 0.7125 V to 2.300 V. |
| 16 | OUT1 | output | General digital output pin 1, CMOS level output; the datasheet text states the high level is 'VFB4' (sentence truncated in the source); absolute maximum voltage on this pin is 4 V. |
| 17 | OUT2 | output | General digital output pin 2, CMOS level output; the datasheet text states the high level is 'VFB4' (sentence truncated in the source); absolute maximum voltage on this pin is 4 V. |
| 18 | XIN | input | 32.768 kHz crystal oscillator input. |
| 19 | XOUT | output | 32.768 kHz crystal oscillator output. |
| 20 | VREF | power_in | Internal reference voltage; the datasheet typical application connects a 0.1 uF capacitor to REFGND. |
| 21 | REFGND | power_in | Reference ground. |
| 22 | VCCA | power_in | Power supply of the controller, operating range 2.8 V to 5.5 V. |
| 23 | VCC6 | power_in | Power supply of LDO3, input range 2.0 V to 5.5 V. |
| 24 | LDO3 | power_out | LDO3 regulator output, adjustable 0.8 V to 3.4 V in 100 mV steps, rated 100 mA with VCCA=5 V. |
| 25 | CLK32K | output | 32.768 kHz clock output, open drain. |
| 26 | FB4 | input | Output feedback voltage of buck4, adjustable 0.8 V to 3.5 V in 100 mV steps. |
| 27 | SW4 | output | Switching node of buck4; rated output current 1.5 A. |
| 28 | VCC4 | power_in | Power supply of buck4, input range 2.7 V to 5.5 V. |
| 29 | VCC3 | power_in | Power supply of buck3, input range 2.7 V to 5.5 V. |
| 30 | SW3 | output | Switching node of buck3; rated output current 1.5 A. |
| 31 | FB3 | input | Output feedback voltage of buck3, feedback voltage 0.800 V typical (0.784 V to 0.816 V). |
| 32 | PWRON | input | Power on key input, active low, with an internal 17k resistor pulled high to VCCA. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Rockchip |
| Package | QFN-32-EP(4x4) |
| Category | Power Management (PMIC) |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage range on pins VCCx, SWx, FBx | -0.3 | 6.5 | V | 13 | |||
| Voltage range on pins LDOx, VREF | -0.3 | 6.5 | V | 13 | |||
| Voltage range on pin CLK32K, SLEEP | -0.3 | 6.5 | V | 13 | |||
| Voltage range on pins XIN, XOUT, EN, PWRON | -0.3 | 13 | |||||
| Voltage range on pins RESETB, INT, SDA, SCL, OUT1, OUT2 | -0.3 | 4 | V | 13 | |||
| Storage temperature range | TS | -40 | 150 | ℃ | 13 | ||
| Operating temperature range | TJ | -40 | 125 | ℃ | 13 | ||
| Maximum Soldering Temperature | TSOLDER | 300 | ℃ | 13 | |||
| Voltage range on pins VCCx | 2.7 | 5 | 5.5 | V | 13 | ||
| Voltage range on other pins | 5.5 | V | 13 | ||||
| Power Dissipation | 2.7 | W | 13 | ||||
| VCCA Operating Range | VVCCA | 2.8 | 5 | 5.5 | V | 13 | |
| VCCA over voltage protect | VVCCA_ov | 6 | V | 13 | |||
| Input supply voltage range (Buck 1) | VCC1 | 2.7 | 5.5 | V | 13 | ||
| Voltage Adjustable Range, 6bit (Buck 1) | VFB1 | 0.7125 | 2.3 | V | 0.7125V~1.45V (Step=12.5mV)/1.8V/2.0V/2.2V/2.3V | 13 | |
| Rated output current (Buck 1) | IMAX1 | 2.5 | A | 13 | |||
| Input supply voltage range (Buck 2) | VCC2 | 2.7 | 5.5 | V | 14 | ||
| Voltage Adjustable Range, 6bit (Buck 2) | VFB2 | 0.7125 | 2.3 | V | 0.7125V~1.45V (Step=12.5mV)/1.8V/2.0V/2.2V/2.3V | 14 | |
| Rated output current (Buck 2) | IMAX2 | 2.5 | A | 14 | |||
| Input supply voltage range (Buck 3) | VCC3 | 2.7 | 5.5 | V | 14 | ||
| Feedback Voltage (Buck 3) | VFB3 | 0.784 | 0.8 | 0.816 | V | 14 | |
| Rated output current (Buck 3) | IMAX3 | 1.5 | A | 14 | |||
| Input supply voltage range (Buck 4) | VCC4 | 2.7 | 5.5 | V | 14 | ||
| Voltage Adjustable Range, 5bit (Buck 4) | VFB4 | 0.8 | 3.5 | V | Step=100mV | 14 | |
| Rated output current (Buck 4) | IMAX4 | 1.5 | A | 14 | |||
| Input supply voltage range (LDO1) | VCC5 | 2 | 5.5 | V | 14 | ||
| VOUT Output Voltage Adjustable Range, 5bit (LDO1) | VLDO1 | 0.8 | 3.4 | V | Step=100mV | 14 | |
| Rated output current (LDO1) | IMAX5 | 300 | mA | VCC5=5V | 14 | ||
| Input supply voltage range (LDO2) | VCC5 | 2 | 5.5 | V | 14 | ||
| VOUT Output Voltage Adjustable Range, 5bit (LDO2) | VLDO2 | 0.8 | 3.4 | V | Step=100mV | 14 | |
| Rated output current (LDO2) | IMAX6 | 300 | mA | VCC5=5V | 14 | ||
| Input supply voltage range (LDO3) | VCC6 | 2 | 5.5 | V | 14 | ||
| VOUT Output Voltage Adjustable Range, 5bit (LDO3) | VLDO3 | 0.8 | 3.4 | V | Step=100mV | 14 | |
| Rated output current (LDO3) | IMAX7 | 100 | mA | VCCA=5V | 14 | ||
| SCL clock frequency | fSCL | 1 | MHz | 14 | |||
| RTC operation voltage | 2.5 | 5.5 | V | 14 | |||
| CLK32K duty | 40 | 60 | % | 14 | |||
| VCCA under voltage protect | VVCCA_uv | 2.7 | V | Step=0.1V, from 2.7V to 3.4V programmable | 13 | ||
| VCCA low voltage alarm | VVCCA_lv | 3.3 | V | Step=0.1V, from 2.8V to 3.5V programmable | 13 | ||
| VCCA OK voltage threshold | VVCCA_OK | 3 | V | 2.8V/3.0V/3.4V/3.6V OTP programmable | 13 | ||
| Power supply reject ratio (f=1kHz) (LDO1) | PSRR1 | 50 | dB | VCC5=5V,VLDO1=1V | 14 | ||
| Drop-out voltage @ 300mA (LDO1) | Vdrop-out1 | 200 | mV | VLDO1=3.4V | 14 | ||
| Power supply reject ratio (f=1kHz) (LDO2) | PSRR2 | 50 | dB | VCC5=5V,VLDO2=1.8V | 14 | ||
| Drop-out voltage @ 300mA (LDO2) | Vdrop-out2 | 200 | mV | VLDO2=3.4V | 14 | ||
| Power supply reject ratio (f=1kHz) (LDO3) | PSRR3 | 70 | dB | VCCA=5V,VLDO3=1.0V | 14 | ||
| Drop-out voltage @ 100mA (LDO3) | Vdrop-out3 | 200 | mV | VLDO3=3.4V | 14 | ||
| CLK32K Jitter | 100 | nS | 14 | ||||
| Reference and system ready 1st channel enable delay | Ton1 | 6 | ms | 17 | |||
| 1st channel enable delay to 2nd channel enable delay | Ton2 | 2 | ms | 17 | |||
| 2nd channel enable to 3rd channel enable delay | Ton3 | 2 | ms | 17 | |||
| 3rd channel enable to 4th channel enable delay | Ton4 | 2 | ms | 17 | |||
| 4th channel enable to 5th channel enable delay | Ton5 | 2 | ms | 17 | |||
| 5th channel enable to RESET enable delay @ RK805-1/2 | Ton7 | 10 | ms | 17 | |||
| RESETB falling delay to supplies disable delay | Toff2 | 2 | ms | 17 | |||
| Thermal resistance junction-to-ambient | θJA | 45 | ℃/W | Power 2 W; 4-layer PCB 114mm x 76mm, 1.6mm; ambient 85°C | 38 | ||
| Thermal resistance junction-to-board | θJB | 21 | ℃/W | Power 2 W; 4-layer PCB 114mm x 76mm, 1.6mm; ambient 85°C | 38 | ||
| Thermal resistance junction-to-case | θJC | 2 | ℃/W | Power 2 W; 4-layer PCB 114mm x 76mm, 1.6mm; ambient 85°C | 38 |
CAD (KiCad official)
- Symbol:
RK805-2 - Footprint:
Package_DFN_QFN:QFN-32-1EP_4x4mm_P0.4mm_EP2.9x2.9mm - 3D model: QFN-32-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
rk805-2-etched.step/rk805-2-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rk805-2.step/rk805-2.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Rockchip datasheet (38 pp, sha256
46ca9bd0d031b3eb, retrieved 2026-10-20, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).