main
Ray Publish 0.1.2 b06f16f
{
  "slug": "rh6618a",
  "version": "0.1.2",
  "type": "component",
  "description": "RONGHE Microelectronics Touch Sensors, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "sensor",
    "rh6618a"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "rh6618a.kicad_sym",
    "rh6618a.kicad_mod",
    "rh6618a.glb",
    "rh6618a.step",
    "rh6618a.lbr",
    "docs/hero.png",
    "docs/rh6618a-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "rh6618a-etched.step",
    "rh6618a-etched.glb",
    "rh6618a-hero.glb",
    "rh6618a-hero.overlay.json"
  ],
  "component": {
    "mpn": "RH6618A",
    "manufacturer": "RONGHE Microelectronics",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Touch Sensors",
    "parts": {
      "symbol": "rh6618a.kicad_sym",
      "footprint": "rh6618a.kicad_mod",
      "model_3d": "rh6618a-hero.glb",
      "model_3d_plain": "rh6618a.glb",
      "model_3d_step": "rh6618a-etched.step",
      "model_3d_step_plain": "rh6618a.step",
      "lbr": "rh6618a.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection on the RH6618A(B). Per section 6 note 3, Pin 1 may be left floating or tied to VDD or GND with no internal effect."
      },
      {
        "number": "2",
        "name": "CMOD",
        "type": "bidirectional",
        "description": "Sampling capacitor pin for the capacitive touch front-end. Connect an NPO/X7R capacitor (recommended 2.2 nF-47 nF, up to ~1 uF for large metal touch pads) to GND. Cm value sets touch sensitivity; larger Cm = higher sensitivity."
      },
      {
        "number": "3",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive supply input. Operating range 2.4 V-5.5 V (typ 3.0 V). Bypass locally with the recommended 10 uF + 0.1 uF filter capacitors placed close to the IC."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground / negative supply return. Reference for VDD, POUT, TCH and CMOD."
      },
      {
        "number": "5",
        "name": "TCH",
        "type": "bidirectional",
        "description": "Capacitive touch sense input. Connect to the touch electrode through a series resistor Rs (>5.1 kΩ recommended) to improve noise immunity. Detects short-press (on/off toggle) and long-press (dimming) events."
      },
      {
        "number": "6",
        "name": "MOD1",
        "type": "input",
        "description": "Mode configuration bit 1. CMOS input with internal pull-up (I-PH); default logic-high. Together with MOD2 selects one of four operating modes per Table 3 (stepless vs 3-level dimming, brightness memory, gradual vs instant on/off). Tie to VDD (=1) or GND (=0)."
      },
      {
        "number": "7",
        "name": "POUT",
        "type": "output",
        "description": "Push-pull CMOS PWM output driving the LED (typically through an NPN driver + current-limit resistor). 25 kHz in stepless dimming, 33 kHz in 3-level dimming. Drive: IOL ≈ 38 mA @ VDD=3 V / 65 mA @ 5 V (VOL=0.3·VDD); IOH ≈ 13 mA @ VDD=3 V / 32 mA @ 5 V (VOH=0.7·VDD)."
      },
      {
        "number": "8",
        "name": "MOD2",
        "type": "input",
        "description": "Mode configuration bit 2. CMOS input with internal pull-up (I-PH); default logic-high. With MOD1 selects the RH6618A(B) operating mode per Table 3. Tie to VDD (=1) or GND (=0)."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "cad_basis": {
        "from": [
          "README CAD section (factory cad_wording)",
          ".kicad_mod model path agrees"
        ],
        "missing": []
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "lcsc": "C511706",
      "digikey": false,
      "mouser": false
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:14:50Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "models_3d": [
      {
        "file": "rh6618a.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "rh6618a-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "21bad89f3d101ff8f0057044c33d64d317d5a7d9dc9f2387d67f104730f0dc1d",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "visibility": "public"
}