main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs rfsa3413tr7: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers rfsa3413tr7: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md rfsa3413tr7: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray
rfsa3413tr7-etched.fit.json rfsa3413tr7: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
rfsa3413tr7-etched.glb rfsa3413tr7: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
rfsa3413tr7-etched.step rfsa3413tr7: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
rfsa3413tr7-hero.glb rfsa3413tr7: hero from the plain model · Ray
rfsa3413tr7-hero.overlay.json rfsa3413tr7: hero from the plain model · Ray
rfsa3413tr7.glb Publish 0.1.0 · Ray
rfsa3413tr7.kicad_mod Publish 0.1.0 · Ray
rfsa3413tr7.kicad_sym Publish 0.1.0 · Ray
rfsa3413tr7.lbr Publish 0.1.0 · Ray
rfsa3413tr7.step Publish 0.1.0 · Ray

RFSA3413TR7

Qorvo · RF Attenuators · QFN-16-EP(3x3)

RFSA3413TR7 from Qorvo, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in DC supply voltage input. Recommended operating range +2.7 V to +5.5 V (abs max -0.5 V to +6 V). Typical supply current 180 uA (300 uA max).
2 RFIN input RF input. Incident RF power must enter this pin for rated thermal performance and reliability. Do not apply DC to this pin; can be DC grounded externally. Internally, a resistor is between this pin and ground. Max continuous RF input +27 dBm at Tc=85 C. 50 ohm input impedance.
3 NC unconnected No internal connection. Land pads should be provided on PCB for mounting integrity.
4 NC unconnected No internal connection. Land pads should be provided on PCB for mounting integrity.
5 NC unconnected No internal connection. Land pads should be provided on PCB for mounting integrity.
6 NC unconnected No internal connection. Land pads should be provided on PCB for mounting integrity.
7 NC unconnected No internal connection. Land pads should be provided on PCB for mounting integrity.
8 NC unconnected No internal connection. Land pads should be provided on PCB for mounting integrity.
9 NC unconnected No internal connection. Land pads should be provided on PCB for mounting integrity.
10 NC unconnected No internal connection. Land pads should be provided on PCB for mounting integrity.
11 RFOUT output RF output. Can be DC grounded externally. Internally, a resistor is between this pin and ground. Max continuous RF output +20 dBm at Tc=85 C. 50 ohm output impedance.
12 NC unconnected No internal connection. Land pads should be provided on PCB for mounting integrity.
13 C8 input 8 dB bit, parallel control input. 3V CMOS compatible logic (VIH >= 1.6 V, VIL <= 0.9 V). Sets the 8 dB step of the attenuation state.
14 C4 input 4 dB bit, parallel control input. 3V CMOS compatible logic (VIH >= 1.6 V, VIL <= 0.9 V). Sets the 4 dB step of the attenuation state.
15 C2 input 2 dB bit, parallel control input. 3V CMOS compatible logic (VIH >= 1.6 V, VIL <= 0.9 V). Sets the 2 dB step of the attenuation state.
16 C1 input 1 dB bit (LSB), parallel control input. 3V CMOS compatible logic (VIH >= 1.6 V, VIL <= 0.9 V). Sets the 1 dB step of the attenuation state.
17 GND power_in Backside exposed paddle. RF/DC ground. Quantity 9 ground via holes recommended for thermal and RF performance.

Key specifications

Parameter Value
Manufacturer Qorvo
Package QFN-16-EP(3x3)
Category RF And Wireless
Pins 17

Ordering variants

Same part, different packaging or reel option.

  • RFSA3413TR7

CAD (KiCad official)

  • Symbol: RFSA3413TR7
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: rfsa3413tr7-etched.step / rfsa3413tr7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rfsa3413tr7.step / rfsa3413tr7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Qorvo datasheet (14 pp, sha256 9be5ed880735ccdf, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF