main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers rfsa2033tr7: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
rfsa2033tr7-etched.glb Publish 0.1.0 · Ray
rfsa2033tr7-etched.step rfsa2033tr7: factory component page (tier=lcsc) · Ray
rfsa2033tr7-hero.glb rfsa2033tr7: hero GLB from the etched model (keeps the MPN mark) · Ray
rfsa2033tr7-hero.overlay.json Publish 0.1.0 · Ray
rfsa2033tr7.glb Publish 0.1.0 · Ray
rfsa2033tr7.kicad_mod Publish 0.1.0 · Ray
rfsa2033tr7.kicad_sym Publish 0.1.0 · Ray
rfsa2033tr7.lbr Publish 0.1.0 · Ray
rfsa2033tr7.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 17 pins · Ray

RFSA2033TR7

Qorvo · RF attenuator · QFN-16-EP(3x3)

RFSA2033TR7 from Qorvo, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground pin.
2 GND power_in Ground pin.
3 RFIN passive RF input; use an external DC block.
4 GND power_in Ground pin.
5 GND power_in Ground pin.
6 GND power_in Ground pin.
7 GND power_in Ground pin.
8 GND power_in Ground pin.
9 GND power_in Ground pin.
10 RFOUT passive RF output; use an external DC block.
11 GND power_in Ground pin.
12 EN input Supply current enable control; connect to logic low to enable and to logic high to disable (logic low max 0.4 V, logic high min 1 V).
13 NC unconnected Floating pin, no connect.
14 VC input Attenuator control voltage, 0 to 2.5 V control range.
15 VDD power_in Supply voltage, 3 V to 5.5 V (absolute maximum -0.5 to +6 V).
16 SLOPE input Attenuation slope control; connect to logic low for negative attenuation slope and to logic high for positive attenuation slope.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Qorvo
Package QFN-16-EP(3x3)
Category RF & Radio
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (VDD) VDD -0.5 6 V 2
SLOPE, VC, EN Pins -0.5 6 V 2
RF input Power 27 dBm 2
Operating Temperature (TCASE) TCASE -40 85 °C 2
Storage Temperature -65 150 °C 2
Junction Temperature 125 °C 2
ESD Rating (HBM) 2000 V 2
Supply Voltage VDD 3 5 5.5 V Internal voltage regulator 2
Operating Temperature -40 85 °C 2
RF Input Power 24 dBm 2
Supply Current IQ 2.5 3.5 mA 2
Frequency Range 50 6000 MHz 2
Minimum Insertion Loss 1 dB 2
Gain Control Range 25 dB 2
Gain versus Temperature 1 dB Peak to peak gain variation over temperature for fixed control range 2
Return Loss 15 dB 2
Relative Phase 7 Deg Insertion phase at 15dB attenuation relative to minimum insertion loss 2
Input 1dB Compression Point 24 dBm 2
CSO -65 dBc 2
CTB -65 dBc 112 Channels, Flat tilt, 32dBmV/Channel 2
XMOD -65 dBc 2
Voltage Control Range, Positive Attenuation Slope VC 0 2.5 V 2.5V control voltage is lowest insertion loss, SLOPE pin logic high 3
Voltage Control Range, Negative Attenuation Slope VC 0 2.5 V 0V control voltage is lowest insertion loss, SLOPE pin logic low 3
SLOPE and EN Pins Logic Low 0.4 V 3
SLOPE and EN Pins Logic High 1 V 3
Voltage Control Pin Current IVC 1.2 µA VC Pin at 2.5V 3
Settling Time 1.5 µs 2dB attenuation change settling within 0.1dB of final value 3
Input IP3 IIP3 40 dBm PIN + (IM3dBc/2) 2
Input IP2 IIP2 75 dBm PIN + IM2dBc, IM2 is F1 +F2 2
Input IH2 80 dBm PIN + H2dBc, H2 is second harmonic 2
Input IH3 45 dBm PIN + (H3dBc/2), H3 is third harmonic 2
Thermal Resistance 101 °C/W 2

CAD (KiCad official)

  • Symbol: RFSA2033TR7
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: rfsa2033tr7-etched.step / rfsa2033tr7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rfsa2033tr7.step / rfsa2033tr7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Qorvo datasheet (22 pp, sha256 a071ac16a91c036c, retrieved 2026-11-07, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF