Generated by kicad-footprint-generator · KiCad file format 20260206
RFSA2013TR7
Qorvo · RF attenuator · TQFN-16-EP(3x3)
RFSA2013TR7 from Qorvo, in a TQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin. |
| 2 | NC | unconnected | No connection; do not connect to the PC board ground plane. |
| 3 | RFIN | input | RF input that needs an external DC block, and must be used as the RF input to ensure the linearity and thermal resistance specifications. |
| 4 | NC | unconnected | No connection; do not connect to the PC board ground plane. |
| 5 | GND | power_in | Ground pin. |
| 6 | GND | power_in | Ground pin. |
| 7 | GND | power_in | Ground pin. |
| 8 | GND | power_in | Ground pin. |
| 9 | NC | unconnected | No connection; do not connect to the PC board ground plane. |
| 10 | RFOUT | output | RF output that needs an external DC block, and must be used as the RF output to ensure the linearity and thermal resistance specifications. |
| 11 | NC | unconnected | No connection; do not connect to the PC board ground plane. |
| 12 | GND | power_in | Ground pin. |
| 13 | GND | power_in | Ground pin. |
| 14 | VC | input | Attenuator control voltage, 0.5 to 4.5 V for the positive attenuation slope (MODE high) and 0 to 3.3 V for the negative slope (MODE low). |
| 15 | VDD | power_in | Supply voltage pin (5V), specified 4.75 to 5.25 V. |
| 16 | MODE | input | Attenuation slope control: logic low enables the negative attenuation slope and logic high enables the positive slope. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Qorvo |
| Package | TQFN-16-EP(3x3) |
| Category | RF & Radio |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (VDD) | VDD | -0.5 | 6 | V | 2 | ||
| Control Voltage (VC) | VC | -0.5 | 6 | V | 2 | ||
| Mode Pin Voltage (MODE) | MODE | -0.5 | 6 | V | 2 | ||
| Storage Temperature | -65 | 150 | °C | 2 | |||
| Junction Temperature | 125 | °C | 2 | ||||
| RF Input Power | 30 | dBm | 2 | ||||
| ESD Rating Human Body Model (HBM) | 1000 | V | 2 | ||||
| Supply Voltage | VDD | 4.75 | 5 | 5.25 | V | 2 | |
| Operating Temperature | -40 | 105 | °C | RF Input Power Handling Derates Above 85°C | 2 | ||
| Frequency Range | 50 | 6000 | MHz | 2 | |||
| Minimum Insertion Loss | 2.6 | 3.5 | dB | 2 | |||
| Gain Control Range | 30 | 33.2 | dB | DC to 4GHz | 2 | ||
| Input IP3 | 45 | 50 | dBm | PIN + (IM3dBC/2) | 2 | ||
| Voltage Control Range, Positive Attenuation Slope | VC | 0.5 | 4.5 | V | 4.5V control voltage is lowest insertion loss, MODE pin high | 2 | |
| Voltage Control Range, Negative Attenuation Slope | VC | 0 | 3.3 | V | 0V control voltage is lowest insertion loss, MODE pin low | 2 | |
| MODE Pin Logic Low | MODE | 0.4 | V | 2 | |||
| MODE Pin Logic High | MODE | 1 | V | 2 | |||
| Supply Current | IDD | 1 | mA | 2 | |||
| Thermal Resistance | 45 | °C/W | RF input must be RFIN pin | 2 | |||
| RF Input Power at 85°C | 27 | dBm | RF input must be RFIN pin | 2 | |||
| Gain versus Temperature | 1.7 | dB | Peak to peak gain variation over temperature for fixed control voltage | 2 | |||
| Return Loss | 15 | dB | 2 | ||||
| Relative Phase | 16.2 | Deg | Insertion phase at 15dB attenuation relative to minimum insertion loss | 2 | |||
| Input 1dB Compression Point | 30 | dBm | 2 | ||||
| Input IP2 | 80 | dBm | PIN + IM2dBC, IM2 is F1+F2 | 2 | |||
| Input IH2 | 85 | dBm | PIN + H2dBC, H2 is second harmonic | 2 | |||
| Input IH3 | 55 | dBm | PIN + (H3dBC/2), H3 is third harmonic | 2 | |||
| Voltage Control Pin Current (MODE High) | IVC | 37 | µA | VC Pin at 5V | 2 | ||
| Voltage Control Pin Current (MODE Low) | IVC | 24 | µA | VC Pin at 3.3V | 2 | ||
| Settling Time | 15 | sec | 1dB attenuation change settling within 0.1dB | 2 |
CAD (KiCad official)
- Symbol:
RFSA2013TR7 - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: TQFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
rfsa2013tr7-etched.step/rfsa2013tr7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rfsa2013tr7.step/rfsa2013tr7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Qorvo datasheet (17 pp, sha256
648b3bfd03ce60cb, retrieved 2026-11-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).