RF430CL331HIPWR

{
  "schema_version": 1,
  "type": "component",
  "slug": "rf430cl331hipwr",
  "title": "RF430CL331HIPWR",
  "brief": "Texas Instruments RF Chips, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "radio frequency chip-antenna",
    "rf430cl331hipwr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "RF430CL331HIPWR",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-14",
    "pin_count": 14,
    "category": "Radio Frequency Chip/Antenna",
    "subcategory": "RF Chips",
    "datasheet": "https://www.ti.com/lit/ds/symlink/rf430cl331hi.pdf",
    "parts": {
      "symbol": "rf430cl331hipwr.kicad_sym",
      "footprint": "rf430cl331hipwr.kicad_mod",
      "model_3d": "rf430cl331hipwr-hero.glb",
      "model_3d_plain": "rf430cl331hipwr-etched.glb",
      "model_3d_step": "rf430cl331hipwr-etched.step",
      "model_3d_step_plain": "rf430cl331hipwr.step",
      "lbr": "rf430cl331hipwr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2654847",
      "digikey": "296-43318-2-ND",
      "mouser": "595-RF430CL331HIPWR"
    },
    "distributor_check": {
      "checked_at": "2026-10-23T02:59:03Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-43318-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-RF430CL331HIPWR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VCC",
        "type": "power_in",
        "description": "3.3-V power supply, recommended 3.0 V to 3.6 V with no RF field present and 2.0 V to 3.6 V with RF field present."
      },
      {
        "number": "2",
        "name": "ANT1",
        "type": "passive",
        "description": "Antenna input 1 (RF, analog) for the 13.56 MHz resonant LC circuit, with antenna input voltage up to 3.6 V peak."
      },
      {
        "number": "3",
        "name": "ANT2",
        "type": "passive",
        "description": "Antenna input 2 (RF, analog) for the 13.56 MHz resonant LC circuit, with antenna input voltage up to 3.6 V peak."
      },
      {
        "number": "4",
        "name": "RST",
        "type": "input",
        "description": "Active-low reset input with an integrated pullup resistor (20 kΩ min, 35 kΩ typ, 50 kΩ max)."
      },
      {
        "number": "5",
        "name": "E0",
        "type": "input",
        "description": "I2C address select 0 input."
      },
      {
        "number": "6",
        "name": "E1",
        "type": "input",
        "description": "I2C address select 1 input."
      },
      {
        "number": "7",
        "name": "E2",
        "type": "input",
        "description": "I2C address select 2 input."
      },
      {
        "number": "8",
        "name": "INTO",
        "type": "output",
        "description": "Interrupt output to the host."
      },
      {
        "number": "9",
        "name": "I2C_READY",
        "type": "output",
        "description": "High indicates that I2C communication can be started; low indicates that I2C communication must not be started."
      },
      {
        "number": "10",
        "name": "I2C_SIGNAL",
        "type": "output",
        "description": "Low indicates that a wait time extension command is automatically being sent; I2C communication does not have to be stopped."
      },
      {
        "number": "11",
        "name": "SCL",
        "type": "bidirectional",
        "description": "I2C clock line."
      },
      {
        "number": "12",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I2C data line."
      },
      {
        "number": "13",
        "name": "VCORE",
        "type": "power_out",
        "description": "Regulated core supply voltage, requiring a low-ESR capacitor of 0.1 µF min, 0.47 µF nominal, 1 µF max."
      },
      {
        "number": "14",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground supply (0 V reference)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: ANT1/ANT2 typed passive because the datasheet lists them only as RF analog antenna pins; VCORE typed"
        ],
        "pages_sent": 15,
        "cost_usd": 0.1309,
        "at": "2026-10-23T02:58:29"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/rf430cl331hi.pdf",
        "pages": 63,
        "sha256": "b632205682c6379f",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 14,
        "described": 14,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "rf430cl331hipwr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5,
          1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "3ee5786aae56190997aa793ba3cfc003fd616782770e29719b4562f012982245",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "rf430cl331hipwr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5,
          1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "b43862ba5de25c390bf19e75692bff2c567d79333bd7b0551f5e0d271d243e9f",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "TSSOP-14",
      "Category": "Radio Frequency Chip/Antenna",
      "Pins": "14"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "b632205682c6379f8c32b0332282c856315dec0cee94a3ba895b8a10b8bcea5c",
      "rows": [
        {
          "name": "Voltage at VCC",
          "symbol": "VAMR",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 4.1,
          "conditions": "referenced to VSS",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Voltage at VANT",
          "symbol": "VAMR",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 4.1,
          "conditions": "referenced to VSS",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Voltage applied to any pin",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": null,
          "conditions": "max is VCC + 0.3, references to VSS",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Diode current at any device pin",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": -2,
          "typ": null,
          "max": 2,
          "conditions": "±2",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Storage temperature",
          "symbol": "Tstg",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 125,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "ESD HBM",
          "symbol": "V(ESD)",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -2000,
          "typ": null,
          "max": 2000,
          "conditions": "Human-body model, ANSI/ESDA/JEDEC JS-001",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "ESD CDM",
          "symbol": "V(ESD)",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -500,
          "typ": null,
          "max": 500,
          "conditions": "Charged-device model, JESD22-C101",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Supply voltage, no RF field",
          "symbol": "VCC",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 3,
          "typ": 3.3,
          "max": 3.6,
          "conditions": "During program execution no RF field present",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Supply voltage, RF field",
          "symbol": "VCC",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 2,
          "typ": 3.3,
          "max": 3.6,
          "conditions": "During program execution with RF field present",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Operating free-air temperature",
          "symbol": "TA",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 85,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Capacitor on VCORE",
          "symbol": "CVCORE",
          "kind": "recommended_operating",
          "unit": "µF",
          "min": 0.1,
          "typ": 0.47,
          "max": 1,
          "conditions": "Low ESR capacitor",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Antenna input voltage",
          "symbol": "VANT_peak",
          "kind": "recommended_operating",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 3.6,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Impedance of LC circuit",
          "symbol": "Z",
          "kind": "recommended_operating",
          "unit": "kΩ",
          "min": 6.5,
          "typ": null,
          "max": 15.5,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Supply voltage (GND reference)",
          "symbol": "VSS",
          "kind": "recommended_operating",
          "unit": "V",
          "min": null,
          "typ": 0,
          "max": null,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Decoupling capacitor on VCC",
          "symbol": "C1",
          "kind": "recommended_operating",
          "unit": "µF",
          "min": null,
          "typ": 0.1,
          "max": null,
          "conditions": "Low ESR capacitor",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Decoupling capacitor on VCC",
          "symbol": "C2",
          "kind": "recommended_operating",
          "unit": "µF",
          "min": null,
          "typ": 1,
          "max": null,
          "conditions": "Low ESR capacitor",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Carrier frequency",
          "symbol": "fc",
          "kind": "recommended_operating",
          "unit": "MHz",
          "min": null,
          "typ": 13.56,
          "max": null,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Coil inductance",
          "symbol": "LRES",
          "kind": "recommended_operating",
          "unit": "µH",
          "min": null,
          "typ": 2.66,
          "max": null,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Total resonance capacitance",
          "symbol": "CRES",
          "kind": "recommended_operating",
          "unit": "pF",
          "min": null,
          "typ": 51.8,
          "max": null,
          "conditions": "CRES = CIN + CTune",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Tank quality factor",
          "symbol": "QT",
          "kind": "recommended_operating",
          "unit": "",
          "min": null,
          "typ": 30,
          "max": null,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Standby supply current",
          "symbol": "ICC(Standby)",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 10,
          "max": 45,
          "conditions": "Standby enable = 1, RF disabled, no serial communication, VCC 3.3 V",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "I2C supply current",
          "symbol": "ICC(I2C)",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 250,
          "max": null,
          "conditions": "I2C, 400 kHz, Writing into NDEF memory, VCC 3.3 V",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "RF enabled supply current",
          "symbol": "ICC(RF enabled)",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 40,
          "max": null,
          "conditions": "RF enabled, no RF field present, VCC 3.3 V",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Inactive supply current",
          "symbol": "ICC(Inactive)",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 15,
          "max": null,
          "conditions": "Standby enable = 0, RF disabled, no serial communication, VCC 3.3 V",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Additional current with strong RF field",
          "symbol": "ΔICC(StrongRF)",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 160,
          "max": null,
          "conditions": "VCC 3.0 V to 3.6 V",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Current drawn from VCC with RF field",
          "symbol": "ICC(RF,lowVCC)",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 0,
          "max": null,
          "conditions": "VCC < 3.0 V with RF field present (passive operation), 2.0 V to 3.0 V",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "High-impedance leakage current",
          "symbol": "IL",
          "kind": "electrical",
          "unit": "nA",
          "min": -50,
          "typ": null,
          "max": 50,
          "conditions": "VCC 3.3 V",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Integrated RST pullup resistor",
          "symbol": "RPU(RST)",
          "kind": "electrical",
          "unit": "kΩ",
          "min": 20,
          "typ": 35,
          "max": 50,
          "conditions": "",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Output low voltage",
          "symbol": "VOL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.4,
          "conditions": "IOL = 3 mA, VCC 3 V / 3.3 V / 3.6 V",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Output high voltage, VCC 3 V",
          "symbol": "VOH",
          "kind": "electrical",
          "unit": "V",
          "min": 2.6,
          "typ": null,
          "max": null,
          "conditions": "IOH = –3 mA, VCC 3 V",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Output high voltage, VCC 3.3 V",
          "symbol": "VOH",
          "kind": "electrical",
          "unit": "V",
          "min": 2.9,
          "typ": null,
          "max": null,
          "conditions": "IOH = –3 mA, VCC 3.3 V",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Output high voltage, VCC 3.6 V",
          "symbol": "VOH",
          "kind": "electrical",
          "unit": "V",
          "min": 3.2,
          "typ": null,
          "max": null,
          "conditions": "IOH = –3 mA, VCC 3.6 V",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Antenna rectified voltage",
          "symbol": "VDDH",
          "kind": "electrical",
          "unit": "V",
          "min": 3,
          "typ": 3.3,
          "max": 3.6,
          "conditions": "Peak voltage limited by antenna limiter",
          "source_page": 11,
          "source": "datasheet"
        },
        {
          "name": "Antenna load current",
          "symbol": "IDDH",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": null,
          "max": 100,
          "conditions": "RMS, without limiter current",
          "source_page": 11,
          "source": "datasheet"
        },
        {
          "name": "Input capacitance",
          "symbol": "CIN",
          "kind": "electrical",
          "unit": "pF",
          "min": 31.5,
          "typ": 35,
          "max": 38.5,
          "conditions": "ANT1 to ANT2, 2 V RMS",
          "source_page": 11,
          "source": "datasheet"
        },
        {
          "name": "Input signal data rate",
          "symbol": "DR10",
          "kind": "electrical",
          "unit": "kbps",
          "min": 106,
          "typ": null,
          "max": 848,
          "conditions": "10% downlink modulation, 7% to 30% ASK, ISO1443B",
          "source_page": 11,
          "source": "datasheet"
        },
        {
          "name": "Modulation depth",
          "symbol": "m10",
          "kind": "electrical",
          "unit": "%",
          "min": 7,
          "typ": null,
          "max": 30,
          "conditions": "10%, tested as defined in ISO/IEC 10373-6",
          "source_page": 11,
          "source": "datasheet"
        },
        {
          "name": "Uplink subcarrier modulation frequency",
          "symbol": "fPICC",
          "kind": "electrical",
          "unit": "MHz",
          "min": 0.2,
          "typ": null,
          "max": 1,
          "conditions": "",
          "source_page": 11,
          "source": "datasheet"
        },
        {
          "name": "Modulated antenna voltage",
          "symbol": "VA_MOD",
          "kind": "electrical",
          "unit": "V",
          "min": 0.5,
          "typ": null,
          "max": null,
          "conditions": "VA_unmod = 2.3 V",
          "source_page": 11,
          "source": "datasheet"
        },
        {
          "name": "Limiter clamping voltage",
          "symbol": "VLIM",
          "kind": "electrical",
          "unit": "Vpk",
          "min": 3,
          "typ": null,
          "max": 3.6,
          "conditions": "ILIM ≤ 70 mA RMS, f = 13.56 MHz",
          "source_page": 11,
          "source": "datasheet"
        },
        {
          "name": "Maximum limiter current",
          "symbol": "ILIM,MAX",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 70,
          "conditions": "",
          "source_page": 11,
          "source": "datasheet"
        },
        {
          "name": "Time until ready for I2C",
          "symbol": "tReady",
          "kind": "timing",
          "unit": "ms",
          "min": null,
          "typ": null,
          "max": 20,
          "conditions": "After power up or reset",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "SCL clock frequency",
          "symbol": "fSCL",
          "kind": "timing",
          "unit": "kHz",
          "min": 0,
          "typ": null,
          "max": 400,
          "conditions": "Master supporting clock stretching, or device not being addressed, 3.3 V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "SCL clock frequency, write",
          "symbol": "fSCL",
          "kind": "timing",
          "unit": "kHz",
          "min": 0,
          "typ": null,
          "max": 120,
          "conditions": "Device addressed by Master not supporting clock stretching, Write, 3.3 V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "SCL clock frequency, read",
          "symbol": "fSCL",
          "kind": "timing",
          "unit": "kHz",
          "min": 0,
          "typ": null,
          "max": 100,
          "conditions": "Device addressed by Master not supporting clock stretching, Read, 3.3 V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Hold time (repeated) START, ≤100 kHz",
          "symbol": "tHD,STA",
          "kind": "timing",
          "unit": "µs",
          "min": 4,
          "typ": null,
          "max": null,
          "conditions": "fSCL ≤ 100 kHz, 3.3 V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Hold time (repeated) START, >100 kHz",
          "symbol": "tHD,STA",
          "kind": "timing",
          "unit": "µs",
          "min": 0.6,
          "typ": null,
          "max": null,
          "conditions": "fSCL > 100 kHz, 3.3 V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Setup time repeated START, ≤100 kHz",
          "symbol": "tSU,STA",
          "kind": "timing",
          "unit": "µs",
          "min": 4.7,
          "typ": null,
          "max": null,
          "conditions": "fSCL ≤ 100 kHz, 3.3 V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Setup time repeated START, >100 kHz",
          "symbol": "tSU,STA",
          "kind": "timing",
          "unit": "µs",
          "min": 0.6,
          "typ": null,
          "max": null,
          "conditions": "fSCL > 100 kHz, 3.3 V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Data hold time",
          "symbol": "tHD,DAT",
          "kind": "timing",
          "unit": "ns",
          "min": 0,
          "typ": null,
          "max": null,
          "conditions": "3.3 V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Data setup time",
          "symbol": "tSU,DAT",
          "kind": "timing",
          "unit": "ns",
          "min": 250,
          "typ": null,
          "max": null,
          "conditions": "3.3 V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Setup time for STOP",
          "symbol": "tSU,STO",
          "kind": "timing",
          "unit": "µs",
          "min": 4,
          "typ": null,
          "max": null,
          "conditions": "3.3 V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Pulse duration of spikes suppressed by input filter",
          "symbol": "tSP",
          "kind": "timing",
          "unit": "ns",
          "min": 6.25,
          "typ": null,
          "max": 75,
          "conditions": "3.3 V",
          "source_page": 10,
          "source": "datasheet"
        },
        {
          "name": "Junction-to-ambient thermal resistance",
          "symbol": "RθJA",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 116,
          "max": null,
          "conditions": "TSSOP-14 (PW), still air",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "Junction-to-case (top) thermal resistance",
          "symbol": "RθJC(TOP)",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 45.1,
          "max": null,
          "conditions": "TSSOP-14 (PW)",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "Junction-to-board thermal resistance",
          "symbol": "RθJB",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 57.6,
          "max": null,
          "conditions": "TSSOP-14 (PW)",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "Junction-to-board thermal characterization parameter",
          "symbol": "ΨJB",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 57,
          "max": null,
          "conditions": "TSSOP-14 (PW)",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "Junction-to-top thermal characterization parameter",
          "symbol": "ΨJT",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 4.6,
          "max": null,
          "conditions": "TSSOP-14 (PW)",
          "source_page": 9,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "rf430cl331hipwr"
  ],
  "discovery_pitch": "RF430CL331HIPWR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "rf430cl331hipwr.kicad_sym",
    "rf430cl331hipwr.kicad_mod",
    "rf430cl331hipwr.glb",
    "rf430cl331hipwr.step",
    "rf430cl331hipwr.lbr",
    "docs/hero.png",
    "docs/rf430cl331hipwr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "rf430cl331hipwr-hero.glb",
    "rf430cl331hipwr-hero.overlay.json",
    "rf430cl331hipwr-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}