main
Ray
Publish 0.1.0
e91e396
REG710NA-2.5
The maker sells this part only as REG710NA-2.5/250 (TI package option addendum / ordering table: the slash suffix is the reel quantity (tape and reel); the bare code is not orderable (p.19)). The DigiKey and Mouser numbers on this page are for REG710NA-2.5/250.
Texas Instruments · DC-DC Converters · SOT-23-6
REG710NA-2.5 from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vout | power_out | Output supply. Connect the output capacitor to this pin. |
| 2 | GND | power_in | Ground |
| 3 | Enable | input | Hardware Enable/Disable pin (high=enable) |
| 4 | Cpump- | passive | Connect to the flying capacitor |
| 5 | Vin | power_in | Input supply pin. Connect the input capacitor to this pin. |
| 6 | Cpump+ | passive | Connect to the flying capacitor |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range (all other models, tested startup) | VIN | 1.8 | 5.5 | V | Tested startup; 'All other models' row (REG710-2.5 is not REG71055 or REG710-5) | 4 | |
| Operating quiescent current | IQ | 65 | 100 | μA | IOUT = 0 mA, TA = 25°C | 4 | |
| Shutdown current | ISD | 0.01 | 1 | μA | VIN = 1.8 V to 5.5 V, Enable = 0 V, TA = 25°C | 4 | |
| Logic high input voltage (ENABLE) | 1.3 | V | VIN = 1.8 V to 5.5 V | 4 | |||
| Logic low input voltage (ENABLE) | -0.2 | 0.4 | V | VIN = 1.8 V to 5.5 V | 4 | ||
| Output voltage (REG710-2.5), IOUT ≤ 10 mA | VOUT | 2.35 | 2.5 | 2.65 | V | IOUT ≤ 10 mA, 1.8 V ≤ VIN ≤ 5.5 V | 5 |
| Output voltage (REG710-2.5), IOUT ≤ 30 mA | VOUT | 2.35 | 2.5 | 2.65 | V | IOUT ≤ 30 mA, 2 V ≤ VIN ≤ 5.5 V | 5 |
| Recommended operating ambient temperature range | TA | -40 | 85 | °C | 4 | ||
| Supply voltage (absolute maximum) | VIN | -0.3 | 6 | V | 3 | ||
| Enable input (absolute maximum) | Enable | -0.3 | V | Maximum printed as VIN | 3 | ||
| Operating ambient temperature (absolute maximum) | TA | -55 | 125 | °C | 3 | ||
| Operating junction temperature (absolute maximum) | TJ | -55 | 150 | °C | 3 | ||
| Storage temperature (absolute maximum) | Tstg | -55 | 150 | °C | 3 | ||
| Junction-to-ambient thermal resistance (DBV) | RθJA | 184.4 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance (DBV) | RθJC(top) | 124.6 | °C/W | 4 | |||
| Junction-to-board thermal resistance (DBV) | RθJB | 30.6 | °C/W | 4 | |||
| Junction-to-top characterization parameter (DBV) | ψJT | 22.1 | °C/W | 4 | |||
| Junction-to-board characterization parameter (DBV) | ψJB | 30.1 | °C/W | 4 | |||
| Logic high input current | 100 | nA | VIN = 1.8 V to 5.5 V, TA = 25°C | 4 | |||
| Logic low input current | 100 | nA | VIN = 1.8 V to 5.5 V, TA = 25°C | 4 | |||
| Nominal output current | Iout | 30 | mA | TA = 25°C | 5 | ||
| Short circuit output current | Isc | 100 | mA | TA = 25°C | 5 | ||
| Ripple voltage | 35 | mVPP | IOUT = 30 mA, TA = 25°C | 5 | |||
| Oscillator frequency | 1 | MHz | 4 | ||||
| Thermal shutdown temperature | 160 | °C | 5 | ||||
| Thermal shutdown recovery temperature | 140 | °C | 5 |
CAD (KiCad official)
- Symbol:
REG710NA-2.5 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
reg710na-2-5-etched.step/reg710na-2-5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);reg710na-2-5.step/reg710na-2-5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (39 pp, sha256
53f7040159d99c87, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# REG710NA-2.5
> The maker sells this part only as REG710NA-2.5/250 (TI package option addendum / ordering table: the slash suffix is the reel quantity (tape and reel); the bare code is not orderable (p.19)). The DigiKey and Mouser numbers on this page are for REG710NA-2.5/250.
**Texas Instruments** · DC-DC Converters · SOT-23-6
REG710NA-2.5 from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vout | power_out | Output supply. Connect the output capacitor to this pin. |
| 2 | GND | power_in | Ground |
| 3 | Enable | input | Hardware Enable/Disable pin (high=enable) |
| 4 | Cpump- | passive | Connect to the flying capacitor |
| 5 | Vin | power_in | Input supply pin. Connect the input capacitor to this pin. |
| 6 | Cpump+ | passive | Connect to the flying capacitor |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range (all other models, tested startup) | VIN | 1.8 | | 5.5 | V | Tested startup; 'All other models' row (REG710-2.5 is not REG71055 or REG710-5) | 4 |
| Operating quiescent current | IQ | | 65 | 100 | μA | IOUT = 0 mA, TA = 25°C | 4 |
| Shutdown current | ISD | | 0.01 | 1 | μA | VIN = 1.8 V to 5.5 V, Enable = 0 V, TA = 25°C | 4 |
| Logic high input voltage (ENABLE) | | 1.3 | | | V | VIN = 1.8 V to 5.5 V | 4 |
| Logic low input voltage (ENABLE) | | -0.2 | | 0.4 | V | VIN = 1.8 V to 5.5 V | 4 |
| Output voltage (REG710-2.5), IOUT ≤ 10 mA | VOUT | 2.35 | 2.5 | 2.65 | V | IOUT ≤ 10 mA, 1.8 V ≤ VIN ≤ 5.5 V | 5 |
| Output voltage (REG710-2.5), IOUT ≤ 30 mA | VOUT | 2.35 | 2.5 | 2.65 | V | IOUT ≤ 30 mA, 2 V ≤ VIN ≤ 5.5 V | 5 |
| Recommended operating ambient temperature range | TA | -40 | | 85 | °C | | 4 |
| Supply voltage (absolute maximum) | VIN | -0.3 | | 6 | V | | 3 |
| Enable input (absolute maximum) | Enable | -0.3 | | | V | Maximum printed as VIN | 3 |
| Operating ambient temperature (absolute maximum) | TA | -55 | | 125 | °C | | 3 |
| Operating junction temperature (absolute maximum) | TJ | -55 | | 150 | °C | | 3 |
| Storage temperature (absolute maximum) | Tstg | -55 | | 150 | °C | | 3 |
| Junction-to-ambient thermal resistance (DBV) | RθJA | | 184.4 | | °C/W | | 4 |
| Junction-to-case (top) thermal resistance (DBV) | RθJC(top) | | 124.6 | | °C/W | | 4 |
| Junction-to-board thermal resistance (DBV) | RθJB | | 30.6 | | °C/W | | 4 |
| Junction-to-top characterization parameter (DBV) | ψJT | | 22.1 | | °C/W | | 4 |
| Junction-to-board characterization parameter (DBV) | ψJB | | 30.1 | | °C/W | | 4 |
| Logic high input current | | | 100 | | nA | VIN = 1.8 V to 5.5 V, TA = 25°C | 4 |
| Logic low input current | | | 100 | | nA | VIN = 1.8 V to 5.5 V, TA = 25°C | 4 |
| Nominal output current | Iout | | 30 | | mA | TA = 25°C | 5 |
| Short circuit output current | Isc | | 100 | | mA | TA = 25°C | 5 |
| Ripple voltage | | | 35 | | mVPP | IOUT = 30 mA, TA = 25°C | 5 |
| Oscillator frequency | | | 1 | | MHz | | 4 |
| Thermal shutdown temperature | | | 160 | | °C | | 5 |
| Thermal shutdown recovery temperature | | | 140 | | °C | | 5 |
## CAD (KiCad official)
- Symbol: `REG710NA-2.5`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `reg710na-2-5-etched.step` / `reg710na-2-5-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `reg710na-2-5.step` / `reg710na-2-5.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/reg71050) (39 pp, sha256 `53f7040159d99c87`, retrieved 2026-11-12, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/reg710na-2-5-datasheet.pdf)