3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownREG71050DRVR
Texas Instruments · DC-DC Converters · WSON-6-EP(2x2)
REG71050DRVR from Texas Instruments, in a WSON-6-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Cpump+ | passive | Connect to the flying capacitor (positive terminal). |
| 2 | Vin | power_in | Input supply pin, 1.8 V to 5.5 V; connect the input capacitor to this pin. |
| 3 | Cpump- | passive | Connect to the flying capacitor (negative terminal). |
| 4 | GND | power_in | Ground. |
| 5 | Enable | input | Hardware enable/disable pin (high = enable); logic high 1.3 V to VIN, logic low -0.2 V to 0.4 V. |
| 6 | Vout | power_out | Regulated output supply; connect the output capacitor to this pin. |
| 7 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-6-EP(2x2) |
| Category | Power Supply Chip |
| Pins | 7 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage | VOUT | 4.7 | 5 | 5.3 | V | IOUT ≤ 10 mA, 2.7 V ≤ VIN ≤ 5.5 V | 5 |
| Output voltage | VOUT | 4.6 | 5 | 5.4 | V | IOUT ≤ 60 mA, 3.3 V ≤ VIN ≤ 4.2 V | 5 |
| Input voltage range (tested startup) | VIN | 2.7 | 5.5 | V | REG710-5; resistive load no lower than typical VOUT/IOUT | 4 | |
| Operating quiescent current | IQ | 65 | 100 | μA | IOUT = 0 mA, TA = 25°C | 4 | |
| Shutdown current | ISD | 0.01 | 1 | μA | VIN = 1.8 V to 5.5 V, Enable = 0 V, TA = 25°C | 4 | |
| Logic high input voltage | 1.3 | V | VIN = 1.8 V to 5.5 V; max printed as VIN | 4 | |||
| Logic low input voltage | -0.2 | 0.4 | V | VIN = 1.8 V to 5.5 V | 4 | ||
| Logic high input current | 100 | nA | VIN = 1.8 V to 5.5 V, TA = 25°C | 4 | |||
| Logic low input current | 100 | nA | VIN = 1.8 V to 5.5 V, TA = 25°C | 4 | |||
| Oscillator frequency | 1 | MHz | 4 | ||||
| Nominal output current | Iout | 30 | mA | TA = 25°C | 5 | ||
| Short circuit output current | Isc | 100 | mA | TA = 25°C | 5 | ||
| Ripple voltage | 35 | mVPP | IOUT = 30 mA, TA = 25°C | 5 | |||
| Thermal shutdown temperature | 160 | °C | 5 | ||||
| Thermal shutdown recovery | 140 | °C | 5 | ||||
| Supply voltage | VIN | -0.3 | 6 | V | over operating free-air temperature range | 3 | |
| Enable input | Enable | -0.3 | V | max printed as VIN | 3 | ||
| Operating ambient temperature | TA | -55 | 125 | °C | 3 | ||
| Operating ambient temperature (TJ row) | TJ | -55 | 150 | °C | 3 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 3 | ||
| ESD HBM | V(ESD) | -2000 | 2000 | V | per ANSI/ESDA/JEDEC JS-001 | 4 | |
| ESD CDM | V(ESD) | -500 | 500 | V | per JEDEC JESD22-C101 | 4 | |
| Input voltage tested startup | VIN | 2.7 | 5.5 | V | REG710-5 | 4 | |
| Operating ambient temperature range | TA | -40 | 85 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 119.1 | °C/W | DRV, 6 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 110.5 | °C/W | DRV, 6 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 88.7 | °C/W | DRV, 6 pins | 4 | ||
| Junction-to-top characterization parameter | ψJT | 7.7 | °C/W | DRV, 6 pins | 4 | ||
| Junction-to-board characterization parameter | ψJB | 89 | °C/W | DRV, 6 pins | 4 | ||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 61.8 | °C/W | DRV, 6 pins | 4 |
CAD (KiCad official)
- Symbol:
REG71050DRVR - Footprint:
Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm - 3D model: WSON-6-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
reg71050drvr-etched.step/reg71050drvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);reg71050drvr.step/reg71050drvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (37 pp, sha256
09e2a8f27c53fd75, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).