main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs reg71050ddct: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers reg71050ddct: viewers · Ray
package.json reg71050ddct: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json reg71050ddct: specified limits as data (metadata.characteristics, 30 rows from the datasheet) · Ray
README.md reg71050ddct: specified limits as data (metadata.characteristics, 30 rows from the datasheet) · Ray
reg71050ddct-etched.fit.json reg71050ddct: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
reg71050ddct-etched.glb reg71050ddct: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
reg71050ddct-etched.step reg71050ddct: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
reg71050ddct.glb Publish 0.1.0 · Ray
reg71050ddct.kicad_mod Publish 0.1.0 · Ray
reg71050ddct.kicad_sym Publish 0.1.0 · Ray
reg71050ddct.lbr Publish 0.1.0 · Ray
reg71050ddct.step Publish 0.1.0 · Ray

REG71050DDCT

Texas Instruments · DC-DC Converters · TSOT-23-6

REG71050DDCT from Texas Instruments, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUT power_out Output supply. Connect the output capacitor to this pin.
2 GND power_in Ground
3 Enable input Hardware Enable/Disable pin (high=enable)
4 CPUMP- passive Connect to the flying capacitor
5 VIN power_in Input supply pin. Connect the input capacitor to this pin.
6 CPUMP+ passive Connect to the flying capacitor

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSOT-23-6
Category Power Management (PMIC)
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input supply voltage (absolute maximum) VIN -0.3 6 V 3
Enable input voltage (absolute maximum) -0.3 V 3
Operating ambient temperature (absolute maximum) TA -55 125 °C 3
Operating temperature, table row labelled TJ TJ -55 150 °C 3
Storage temperature Tstg -55 150 °C 3
Electrostatic discharge, human body model V(ESD) -2000 2000 V HBM, per ANSI/ESDA/JEDEC JS-001 4
Electrostatic discharge, charged device model V(ESD) -500 500 V CDM, per JEDEC JESD22-C101 4
Input voltage range, all other models VIN 1.8 5.5 V All other models 4
Input voltage range, tested startup VIN 2.7 5.5 V Tested Startup, REG710-5 row 4
Operating ambient temperature range TA -40 85 °C 4
Input voltage range (electrical table, all other models) VIN 1.8 5.5 V Tested startup; see conditions under output voltage with resistive load 4
Operating quiescent current IQ 65 100 μA IOUT = 0 mA, TA = 25°C 4
Shutdown current ISD 0.01 1 μA VIN = 1.8 V to 5.5 V, Enable = 0 V, TA = 25°C 4
Logic high input voltage (ENABLE) 1.3 V VIN = 1.8 V to 5.5 V 4
Logic low input voltage (ENABLE) -0.2 0.4 V VIN = 1.8 V to 5.5 V 4
Logic high input current (ENABLE) 100 nA VIN = 1.8 V to 5.5 V, TA = 25°C 4
Logic low input current (ENABLE) 100 nA VIN = 1.8 V to 5.5 V, TA = 25°C 4
Oscillator frequency 1 MHz 4
Output voltage, REG710-5 and REG71050 VOUT 4.7 5 5.3 V IOUT ≤ 10 mA, 2.7 V ≤ VIN ≤ 5.5 V 5
Output voltage, REG710-5 and REG71050 VOUT 4.6 5 5.4 V IOUT ≤ 60 mA, 3.3 V ≤ VIN ≤ 4.2 V 5
Nominal output current IOUT 30 mA TA = 25°C 5
Short circuit output current Isc 100 mA TA = 25°C 5
Output ripple voltage 35 mVPP IOUT = 30 mA, TA = 25°C 5
Thermal shutdown temperature 160 °C 5
Thermal shutdown recovery temperature 140 °C 5
Junction-to-ambient thermal resistance RθJA 204.6 °C/W DDC package 4
Junction-to-case (top) thermal resistance RθJC(top) 50.5 °C/W DDC package 4
Junction-to-board thermal resistance RθJB 54.3 °C/W DDC package 4
Junction-to-top characterization parameter ψJT 0.8 °C/W DDC package 4
Junction-to-board characterization parameter ψJB 52.8 °C/W DDC package 4

CAD (KiCad official)

  • Symbol: REG71050DDCT
  • Footprint: Package_TO_SOT_SMD:TSOT-23-6
  • 3D model: TSOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: reg71050ddct-etched.step / reg71050ddct-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); reg71050ddct.step / reg71050ddct.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (39 pp, sha256 53f7040159d99c87, retrieved 2026-09-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF